Official Journal C 92 of the European Union Volume 61 English edition Information and Notices 9 March 2018 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European Commission 2018/C 092/01 Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 1 2018/C 092/02 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 87 2018/C 092/03 Commission communication in the framework of the implementation of Commission Regulation (EU) No 206/2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans and of Commission Delegated Regulation (EU) No 626/2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 98 2018/C 092/04 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council, Decision No 768/2008/EC of the European Parliament and of the Council and Regulation (EC) No 1221/2009 of the European Parliament and of the Council (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 101 2018/C 092/05 Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (1) . 106 EN (1) Text with EEA relevance. 2018/C 092/06 Commission communication in the framework of the implementation of Regulation (EU) No 305/ 2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards (1) . 139 (1) Text with EEA relevance. 9.3.2018 EN Official Journal of the European Union C 92/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 092/01) Date of cessation of presumption of Reference and title of the standard Reference of superseded ESO (1) First publication OJ conformity of superseded (and reference document) standard standard Note 1 A-type standards A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity. (1) (2) (3) (4) (5) CEN EN ISO 12100:2010 8.4.2011 EN ISO 12100-1:2003 30.11.2013 Safety of machinery — General principles for EN ISO 12100-2:2003 design — Risk assessment and risk reduction EN ISO 14121-1:2007 (ISO 12100:2010) Note 2.1 B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards. CEN EN 349:1993+A1:2008 8.9.2009 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body C 92/2 EN Official Journal of the European Union 9.3.2018 (1) (2) (3) (4) (5) CEN EN 547-1:1996+A1:2008 8.9.2009 Safety of machinery — Human body measure- ments — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery CEN EN 547-2:1996+A1:2008 8.9.2009 Safety of machinery — Human body measure- ments — Part 2: Principles for determining the dimensions required for access openings CEN EN 547-3:1996+A1:2008 8.9.2009 Safety of machinery — Human body measure- ments — Part 3: Anthropometric data CEN EN 574:1996+A1:2008 8.9.2009 Safety of machinery — Two-hand control devices — Functional aspects — Principles for design CEN EN 614-1:2006+A1:2009 8.9.2009 Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles CEN EN 614-2:2000+A1:2008 8.9.2009 Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks CEN EN 842:1996+A1:2008 8.9.2009 Safety of machinery — Visual danger signals — General requirements, design and testing CEN EN 894-1:1997+A1:2008 8.9.2009 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators CEN EN 894-2:1997+A1:2008 8.9.2009 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays CEN EN 894-3:2000+A1:2008 8.9.2009 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators 9.3.2018 EN Official Journal of the European Union C 92/3 (1) (2) (3) (4) (5) CEN EN 894-4:2010 20.10.2010 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators CEN EN 981:1996+A1:2008 8.9.2009 Safety of machinery — System of auditory and visual danger and information signals CEN EN 1005-1:2001+A1:2008 8.9.2009 Safety of machinery — Human physical perfor- mance — Part 1: Terms and definitions CEN EN 1005-2:2003+A1:2008 8.9.2009 Safety of machinery — Human physical perfor- mance — Part 2: Manual handling of machinery and component parts of machinery CEN EN 1005-3:2002+A1:2008 8.9.2009 Safety of machinery — Human physical perfor- mance — Part 3: Recommended force limits for machinery operation CEN EN 1005-4:2005+A1:2008 8.9.2009 Safety of machinery — Human physical perfor- mance — Part 4: Evaluation of working postures and movements in relation to machinery CEN EN 1032:2003+A1:2008 8.9.2009 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value CEN EN 1037:1995+A1:2008 8.9.2009 Safety of machinery — Prevention of unexpected start-up CEN EN 1093-1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods CEN EN 1093-2:2006+A1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant CEN EN 1093-3:2006+A1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant C 92/4 EN Official Journal of the European Union 9.3.2018 (1) (2) (3) (4) (5) CEN EN 1093-4:1996+A1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method CEN EN 1093-6:1998+A1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet CEN EN 1093-7:1998+A1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet CEN EN 1093-8:1998+A1:2008 8.9.2009 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method CEN EN 1093-9:1998+A1:2008 8.9.2009 Safety