GRANITE SURFACE PLATE 6900-132 H L W Made of granite, free from deterioration or dimensional change over time, minimal changes in dimension due to temperature changes Meet DIN876, grade 00 is for inspection room or lab, grade 0 is for workshop Supplied with calibration certificate Optional accessory: stand for granite surface plate(code 6902), jack for granite surface plate (code 6903) Grade 00 Grade 0 Code Size(LxWxH) Flatness Weight(Kg) Code Size(LxWxH) Flatness Weight(Kg) 6900-132 300x200x60mm 2.7µm 11 6900-032 300x200x60mm 5.4µm 11 6900-142 400x250x60mm 2.9µm 18 6900-042 400x250x60mm 5.9µm 18 6900-144 400x400x60mm 3.1µm 29 6900-044 400x400x60mm 6.3µm 29 6900-153 500x315x70mm 3.2µm 33 6900-053 500x315x70mm 6.4µm 33 6900-164 630x400x80mm 3.5µm 60 6900-064 630x400x80mm 7.0µm 60 6900-166 630x630x100mm 3.8µm 119 6900-066 630x630x100mm 7.6µm 119 6900-185 800x500x100mm 3.9µm 120 6900-085 800x500x100mm 7.8µm 120 6900-1106 1000x630x140mm 4.4µm 265 6900-0106 1000x630x140mm 8.7µm 265 6900-1101 1000x1000x150mm 4.8µm 450 6900-0101 1000x1000x150mm 9.7µm 450 6900-1128 1200x800x160mm 4.9µm 461 6900-0128 1200x800x160mm 9.8µm 461 6900-1161 1600x1000x180mm 5.8µm 864 6900-0161 1600x1000x180mm 11.5µm 864 6900-1201 2000x1000x220mm 6.5µm 1320 6900-0201 2000x1000x220mm 12.9µm 1320 6900-1202 2000x1500x250mm 7.0µm 2250 6900-0202 2000x1500x250mm 14.0µm 2250 6900-1251 2500x1500x300mm 7.8µm 3375 6900-0251 2500x1500x300mm 15.7µm 3375 6900-1302 3000x2000x400mm 9.2µm 7200 6900-0302 3000x2000x400mm 18.4µm 7200 L1 STAND FOR GRANITE SURFACE PLATE Unit: mm D W jack 80 H 80 6902-64A For medium size granite surface plates Adjusting range of jacks: 25mm One foot on the bottom is adjustable (mm) Code For granite surface plate W D H 6902-64A 630x400x80mm(code 6900-064 and 6900-164) 440 280 755-780 6902-66A 630x630x100mm(code 6900-066 and 6900-166) 440 440 755-780 6902-85A 800x500x100mm(code 6900-085 and 6900-185) 560 350 755-780 6902-106A 1000x630x140mm(code 6900-0106 and 6900-1106) 700 440 735-760 6902-101A 1000x1000x150mm(code 6900-0101 and 6900-1101) 700 700 735-760 6902-128A 1200x800x160mm(code 6900-0128 and 6900-1128) 840 560 735-760 6902-161A 1600x1000x180mm(code 6900-0161 and 6900-1161) 1120 700 735-760 JACK SET FOR GRANITE SURFACE PLATE Unit: mm 30-130 Ø120 Code 460 6903 6903 5 jacks per set Adjustable height Ø220 For large granite surface plates: 2000x1000x220mm(code 6900-0201 and 6900-1201) 2000x1500x250mm(code 6900-0202 and 6900-1202) 2500x1500x300mm(code 6900-0251 and 6900-1251) 3000x2000x400mm(code 6900-0302 and 6900-1302) L2 GRANITE STRAIGHT EDGE 4147-500 (mm) top Code Length(L) Flatness of top D H 4147-500 500mm 2.8µm 50 80 H 4147-1000 1000mm 3.3µm 60 120 D L MAGNALIUM STRAIGHT EDGE 4180-500 L top D H W Made of magnalium, light weight, non-deform, no rusty bottom (mm) Flatness of top Parallelism between Code Length(L) H W D and bottom top and bottom 4180-500 500mm 3µm 4µm 60 30 5 4180-1000 1000mm 5µm 8µm 60 30 5 4180-1500 1500mm 15µm 22µm 60 30 5 4180-2000 2000mm 18µm 27µm 100 40 8 L3 GRANITE SQUARE H 90° W D 4141-250 Code Size(HxW) Squareness D 4141-250 250x160mm 2.5µm 25mm 4141-400 400x250mm 3.5µm 40mm 4141-630 630x400mm 4.5µm 63mm GRANITE SQUARE Unit: mm 90° 90° H 90° 90° W 40 4144-315 Code Size(HxW) Squareness 4144-315 315x315mm 2.6µm L4 GRANITE SQUARE AND V-BLOCK shaft Ød top H left right front back bottom W L 4142-160 Thread holes: M8 Parallelism or squareness Parallelism of Squareness of Range of Code Size(LxWxH) between top, bottom, left, V groove to left, right, V groove to shafts (Ød) right and back sides top and bottom sides back side 4142-160 160x160x160mm 6 - 42mm 8µm 8µm 8µm MAGNETIC SQUARE AND V-BLOCK shaft shaft Ød Ød top left right H front back bottom W L 6510-1A Parallelism or squareness Parallelism or squareness of Magnetic Range of Code Size(LxWxH) between top, bottom, left, both V grooves to top, bottom, force shafts (Ød) right and back sides left, right and back sides 6510-1A 100x100x100mm 30kgf 6 - 36mm 10µm 10µm 6510-2A 150x150x150mm 30kgf 6 - 44mm 15µm 15µm L5 V-BLOCK SET Ød top H front back Ød bottom W L 6896-11 Hold cylindrical workpieces for inspection and machining Two V-blocks per set Hardened to HRC60±2 V groove on the top for large shafts V groove on the bottom for small shafts Range of Parallelism of both V grooves Squareness of both V grooves Height difference Code Size(LxWxH) shafts (Ød) to top and bottom sides to front and back sides of a matched pair 6896-11 50x40x40mm 5 - 40mm 5µm 5µm 5µm 6896-12 80x63x63mm 7- 63mm 5µm 5µm 5µm 6896-13 100x80x80mm 7- 80mm 5µm 5µm 5µm ROLLER BEARING V-BLOCK SET Ød H 6888-1 W W1 Two V-blocks per set Workpieces don't get damaged due to bearings L Suitable for heavy workpieces Parallelism of bearings to bottom Code Size (LxWxH) Range of shafts (Ød) Load capacity W1 (when two V-blocks are closed) 6888-1 150x60x100mm 25 - 70mm 5µm 500kg 22mm 6888-2 150x80x100mm 3 - 55mm 5µm 1000kg 40mm 6888-3 230x100x150mm 70 - 200mm 5µm 1000kg 60mm L6 MAGNETIC V-BLOCK SET 6889-1 d Ø A B top left right H front back Ø d bottom W L C D Hold cylindrical workpieces for inspection and machining Two V-blocks per set Surface A, B,C,D are hardened to HRC60±2 Magnetic force on top, bottom and two V grooves V groove on the top for large shafts V groove on the bottom for small shafts Suitable for cast iron surface plates and granite surface plates Range of Magnetic Parallelism of both V grooves Squareness of both Height difference Code Size (LxWxH) shafts (Ød) force to top, bottom, left, right sides V grooves to back side of a matched pair 6889-1 75x56x75mm 5 - 40mm 75kgf 5µm 5µm 5µm 6889-2 100x70x95mm 5 - 65mm 100kgf 5µm 5µm 5µm 6889-3 150x75x100mm 5 - 70mm 125kgf 5µm 5µm 5µm L7 MAGNETIC V-BLOCK shaft Ød top left right H front back bottom W L 6890-702 Hold cylindrical workpieces for inspection and machining Supplied in single piece Not hardened Not suitable for cast iron surface plates Range of Magnetic Parallelism of V groove to top, Squareness of Code Size(LxWxH) shafts (Ød) force bottom, left and right sides V groove to back side 6890-702 70x60x73mm 6 - 44mm 56kgf 10µm 10µm shaft MAGNETIC V-BLOCK Ød top H left right front back bottom Ød shaft W L 6801-1201 Hold cylindrical workpieces for inspection and machining Supplied in single piece Not hardened V groove on the top for large shafts V groove on the bottom for small shafts Not suitable for cast iron surface plates Range of Magnetic Parallelism of both V grooves Squareness of both Code Size(LxWxH) shafts (Ød) force to top, bottom, left, right side V grooves to back side 6801-1201 80x70x95mm 6 - 67mm 64kgf 10µm 10µm 6801-1202 100x70x95mm 6 - 67mm 80kgf 10µm 10µm 6801-1203 120x70x95mm 6 - 67mm 96kgf 10µm 10µm L8 shaft MAGNETIC V-BLOCK SET Ød top top front back H bottom W L 6891-1 Hold cylindrical workpieces for inspection, not suitable for machining due to weak magnetic force Two V-blocks per set Range of Magnetic Parallelism of V groove Height difference Code Size(LxWxH) shafts (Ød) force to bottom and back sides of a matched pair 6891-1 70x40x50mm 6 - 46mm 8kgf 10µm 10µm 6891-3 150x50x100mm 6 -125mm 14kgf 10µm 10µm MAGNETIC INDUCTION V-BLOCK shaft Unit: mm Ød 2.5+3 top left right H bottom Ød shaft W L 6892-1 Hold cylindrical workpieces for inspection and machining To be used on magnetic chucks Supplied in single piece V groove on the top for large shafts V groove on the bottom for small shafts Range of Parallelism of both V grooves Code Size(LxWxH) Pole pitch shafts (Ød) to top, bottom, left, right sides 6892-1 110x60x48mm 6 - 50mm 2.5+3mm 10µm L9 MAGNETIC INDUCTION V-BLOCK SET shaft Unit: mm Ød 2.5+3 top left right H bottom Ød shaft W L 6899-1 Hold cylindrical workpieces for inspection and machining To be used on magnetic chucks Two V-blocks per set V groove on the top for large shafts V groove on the bottom for small shafts Range of Parallelism of both V grooves Height difference Code Size(LxWxH) Pole pitch shafts (Ød) to top, bottom, left and right sides of a matched pair 6899-1 50x60x48mm 6 - 50mm 2.5+3mm 10µm 10µm GRANITE V-BLOCK SET shaft Ød top H bottom W L 6897-1 Two V-blocks per set Range of Parallelism of Height difference Code Size(LxWxH) shafts (Ød) V groove to bottom of a matched pair 6897-1 70x70x50mm 6 - 75mm 5µm 5µm 6897-2 100x70x50mm 6 - 99mm 5µm 5µm L10 GRANITE PARALLEL SET A H C D B L W W H 4143-250 Made of granite, hard and no rusty, Parallelism Parallelism Height difference Code Size(LxWxH) no dimensional change over time between A and B between C and D of a matched pair or temperature change 4143-250 250x25x40mm 5µm 5µm 5µm Two parallels per set PARALLEL SET L W top H bottom Parallelism between top and bottom: 5µm Height difference of a matched pair: 5µm 6533-144 Hardened to HRC55-60 (mm) Code Parallels per set Length(L) Thickness(W) Height(H) 2 5, 10, 15, 20 3 6, 11, 16, 21 6533-20 20 pairs 100 4 7, 12, 17, 22 5 8, 13, 18, 23 6 9, 14, 19, 24 8 11, 16, 21, 26, 31, 36 10 13, 18, 23, 28, 33, 38 6533-242 24 pairs 125 12 15, 20, 25, 30, 35, 40 14 17, 22, 27, 32, 37, 42 6533-143 14 pairs 150 5 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 35, 40, 45, 50 6533-144 14 pairs 150 10 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 35, 40, 45, 50 8 11, 16, 21, 26, 31, 36 10 13, 18, 23, 28, 33, 38 6533-241 24 pairs 150 12 15, 20, 25, 30, 35, 40 14 17, 22, 27, 32, 37, 42 L11 MAGNETIC INDUCTION PARALLEL SET Unit: mm 2.5+3 A H C D W B L 6894-1 2.5+3 6894-1 A H C D B W L 6894-2 6894-2 H W To be used on magnetic chucks Two parallels per set Parallelism Parallelism Height difference Code Size(LxWxH) Pole pitch between A and B between C and D of a matched pair