Quick start guide Quick reference guide - handset Quick reference guide - telephone base Initial settings We recommend you program your telephone system before CL83114/CL83214/CL83314/CL83364/ CHARGE light pDIR/VOLUME CANCEL pDIR CL83414/CL83464 use. The following are a few examples of common features to set before On when the handset is • Press pDIR to show • While in a menu, press to cancel an operation, • Press to display the directory when the using the telephone. Refer to the Handset settings, Telephone base settings This quick start guide provides you with basic instructions only. charging in the telephone base directory entries when the back up to the previous menu or exit the phone is not in use. or charger. handset is not in use. menu display. • Press to scroll up while in menus and lists. and Answering system settings in the Abridged user’s manual or the online For more complete instructions, refer to your Abridged user’s • Press to scroll up while in • Press and hold to go back to idle mode. Complete user’s manual for detailed instructions on setting all telephone features. manual provided in the package, or see the online Complete qCID/VOLUME menus. FLASH • Press to increase the qCID user’s manual at www.telephones.att.com/manuals. • Press qCID to show caller listening volume when on During a call, press to answer an incoming call Set date/time ID log when the handset is a call. • Press to display the caller ID log when the when you receive a call waiting alert. not in use. phone is not in use. Set the date/time before using the answering system. Telephone base installation Charger installation • Press to scroll down while MENU/SELECT • Press to scroll down while in menus and lists. in menus. Using a cordless handset or the telephone base: Plug the large end of the Plug one end of the Plug the power adapter • Press to decrease the • When the handset is not MENU/SELECT 1. MENU -> q or p -> Set date/time -> SELECT. telephone base power adapter telephone line cord into a power outlet not in use, press to show the listening volume when on 2. Enter the month, day and year using the dialing keys -> SELECT. into a power outlet not controlled into a telephone jack controlled by a wall a call. menu. • When the telephone base is not in use, press by a wall switch. or a DSL filter. switch. • While in the menu, press to to show the menu. 3. Enter the hour and minute using the dialing keys. select an item or save an REDIAL/PAUSE • While in the menu, press to confirm or save an 4. q or p to choose AM or PM -> SELECT. entry or setting. entry or setting. Route the power • Press repeatedly to view the Basic answering system setup via voice guide last ten numbers dialed. adapter cord ����������OFF/CANCEL • While entering numbers, You can follow the voice guide to record your own announcement, set the through this slot. press and hold to insert a • During a call, press to hang number of rings and set the message alert tone. dialing pause. up. 1 • While in a menu, press to Using the telephone base: If you have DSL cancel an operation, back Press and hold to set or dial your high-speed Internet PHONE/FLASH up to the previous menu, voicemail number. 1. MENU -> q or p -> Answering sys -> SELECT. Raise the service, a DSL filter Press to make or answer a call. or exit the menu display, or 2. q or p -> Voice guide -> SELECT. press and hold this button antenna. (not included) is /HANDSET LOCATOR 3. Set up the answering system by inputting the designated numbers as instructed. required. to exit to idle mode. While the phone is idle, press to 1 page all handsets. Record your own announcement QUIET# (pound key) Press and hold to set or dial Your outgoing announcement plays when calls are answered by the answering Route the your voicemail number. Press and hold to enter the REDIAL/PAUSE telephone line cord QUIET mode setting screen, or system. You can use the preset announcement to answer calls, or replace it to deactivate QUIET mode. • Press repeatedly to view the through this slot. with your own recorded announcement. Plug the power cord and TONE /a>A last 10 numbers dialed. the telephone line cord • While entering numbers, • Press to switch to tone Using a cordless handset: into the jacks. press and hold to insert a dialing temporarily during EQ dialing pause. 1. MENU -> q or p -> Answering sys -> SELECT. a call if you have pulse Caution: Use only the power adapter(s) provided with this product. To obtain a replacement, service. During an outside call, PTT MIC 2. SELECT to select Announcement. intercom call, message or q/VOLUME/p visit our website at www.telephones.att.com or call 1 (800) 222-3111. • While entering names, press announcement playback, press • Press to initiate a Microphone 3. SELECT to select Record annc. to change the next letter to • While in idle mode, press to In Canada, dial 1 (866) 288-4268. to change the audio quality to one-to-one or 4. Facing the handset, record your announcement and press 5 to end recording. upper or lower case. best suit your hearing. adjust the base ringer volume. one-to-group broadcast. • When on a call, press to adjust • Press and hold to Using the telephone base: the listening volume. Battery installation /SPEAKER MUTE/DELETE broadcast to a group of 1. •/RECORD -> q or p -> Announcement -> SELECT. system devices. Install the battery as shown below. Charge your handset(s) before initial use. Press to make or answer a call • During a call, press to mute 2. Speak towards the telephone base to record your announcement and press using the speakerphone. The battery is fully charged after ten hours of continuous charging. the microphone. 5 to end recording. • Press to delete digit or character. Step 1 Step 2 Number of rings Plug the battery connector Align the cover flat •/RECORD You can set the answering system to answer an incoming call after two, three, securely into the socket against the battery Press to record a memo or an announcement. four, five or six rings, or toll saver. If you choose toll saver, the answering Handset system answers a call after two rings if you have new messages, or after four inside the handset battery compartment, then /REPEAT side view rings when there are no new messages. compartment. Insert the slide it upwards until it • During playback, press to repeat the playing message. supplied battery with the clicks into place. • During playback, press twice to play the previous message. If you want the built-in answering system instead of the voicemail to answer a label THIS SIDE UP facing call, you should set the answering system to answer a call at least two rings PUSH TO TALK /SKIP TTERIES. before the voicemail is set to answer. Contact your telephone service provider TTERIES. up as indicated. : : • Press to initiate a one-to-one or one-to- : : / CE CÔTÉ VERS LE HAUT / CE CÔTÉ VERS LE HAUT Press to skip a message. VERTISSEMENT for information on your voicemail settings. A VERTISSEMENT A group broadcast. S INCINÉRER OU PERCER LES PILES. THIS SIDE UP S INCINÉRER OU PERCER LES PILES. PA ARNING / THIS SIDE UP PA Battery Pack / Bloc-piles BT183342/BT283342 (2.4V 400mAh Ni-MH) W DO NOT BURN OR PUNCTURE BA NE Made in China / Fabriqué en chine ARNING / Battery Pack / Bloc-piles BT183342/BT283342 (2.4V 400mAh Ni-MH) W DO NOT BURN OR PUNCTURE BA NE Made in China / Fabriqué en chine • Press and hold to broadcast to a group of /PLAY/STOP Using a cordless handset or the telephone base: system devices. Press to start or stop message playback. 1. MENU -> q or p -> Answering sys -> SELECT. X/DELETE 2. q or p -> Ans sys setup -> SELECT. 3. q or p -> # of rings -> SELECT. CHARGE light • While reviewing the caller ID log, the directory or the redial memory, press to delete an individual entry. 4. q or p to choose among 2, 3, 4, 5, 6 or Toll saver -> SELECT. • Press to delete digit or character. Step 3 Ringer volume /ANS ON/OFF You can set the ringer volume level to one of the six levels or turn the Charge the handset by placing it face forward in Press to turn the built-in answering system on or off. the telephone base or charger. The CHARGE light ringer off. MUTE on the handset is on during charging. Using a cordless handset or the telephone base: • During a call, press to mute the microphone. • When the phone is ringing, press to mute the ringer 1. MENU -> q or p -> Ringers -> SELECT. temporarily. 2. SELECT to select Ringer volume. /SPEAKER 3. q or p to choose the desired level -> SELECT. Press to make or answer a call using the speakerphone. Reset language to English Use only the supplied rechargeable battery or replacement battery (model BT183342/ If you have accidentally changed the screen display language and want to BT283342). switch it back to English, follow the steps below. • MENU in idle mode -> enter 364#. Telephone operation Call block Answering system (continued) Operation Steps If you have subscribed to Caller ID service, you can use the call block feature to Call screening Making a call Using a cordless handset: reject certain calls automatically. The call block list can store up to 20 entries. Use this feature to choose whether incoming messages can be heard over at This feature is only available on the telephone base.