International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. Standards published New International Standards published between 01 October and 31 October 2010 * Available in English only ** French version of standard previously published in English only Price grou p TC 8 Ships and marine technology ISO 23269- * Ships and marine technology — Breathing apparatus for ships — Part 4: Self-contained breathing B 4:2010 apparatus for emergency escape required by the IMO IBC and IGC Codes TC 17 Steel ISO 15630- Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, wire K 1:2010 rod and wire ISO 15630- Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric H 2:2010 ISO 15630- Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel N 3:2010 TC 23 Tractors and machinery for agriculture and forestry ISO 11783- Tractors and machinery for agriculture and forestry — Serial control and communications data network — XF 6:2010 Part 6: Virtual terminal TC 28 Petroleum products and lubricants ISO 3987:2010 * Petroleum products — Determination of sulfated ash in lubricating oils and additives D ISO 4263- Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using L 3:2010 the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids TC 34 Food products ISO/TS Milk, milk products and infant formulae — Guidelines for the quantitative determination of melamine and N 15495:2010 cyanuric acid by LC-MS/MS ISO/TS Microbiology of food and animal feeding stuffs — Specific requirements and guidance for proficiency N 22117:2010 testing by interlaboratory comparison ISO Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic method D 27608:2010 TC 35 Paints and varnishes ISO Paints and varnishes — Modelling of biocide release rate from antifouling paints by mass-balance D 10890:2010 calculation ISO Binders for paints and varnishes — Gum rosin — Gas-chromatographic analysis D 19334:2010 TC 37 Terminology and other language and content resources ISO 24614- * Language resource management — Word segmentation of written texts — Part 1: Basic concepts and H 1:2010 general principles ISO * Language resource management — Syntactic annotation framework (SynAF) J 24615:2010 TC 43 Acoustics ISO 8253- Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry N 1:2010 TC 44 Welding and allied processes ISO Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal N 17633:2010 arc welding of stainless and heat-resisting steels — Classification ISO 7291:2010 Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied K processes up to 30 MPa (300 bar) TC 45 Rubber and rubber products ISO Rubber — General procedures for preparing and conditioning test pieces for physical test methods H 23529:2010 ISO 8942:2010 Rubber compounding ingredients — Carbon black — Determination of individual pellet crushing strength D ISO/TR Rubber — Measurement of the aromaticity of oil in reclaimed rubbers C 16314:2010 ISO 22762- * Elastomeric seismic-protection isolators — Part 1: Test methods W 1:2010 ISO 22762- * Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications U 2:2010 ISO 22762- * Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications U 3:2010 TC 58 Gas cylinders ISO * Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspection K 10961:2010 TC 61 Plastics ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals K ISO * Plastics — Artificial weathering including acidic deposition H 29664:2010 ISO 8510- Adhesives — Peel test for a flexible-bonded-to-rigid test specimen assembly — Part 2: 180 degree peel C 2:2006 TC 69 Applications of statistical methods ISO 16269- * Statistical interpretation of data — Part 4: Detection and treatment of outliers U 4:2010 ISO Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty R 21748:2010 estimation TC 79 Light metals and their alloys ISO 7668:2010 Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of G anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees TC 87 Cork ISO 9149:2010 Cork wallcoverings in rolls — Specifications E TC 89 Wood-based panels ISO 16895- * Wood-based panels — Dry-process fibreboard — Part 2: Requirements L 2:2010 ISO 16893- * Wood-based panels — Particleboard — Part 2: Requirements H 2:2010 TC 92 Fire safety ISO 11925- * Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single- M 2:2010 flame source test TC 94 Personal safety -- Protective clothing and equipment ISO 13982- Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical XZ 1:2004/Amd protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) 1:2010 — Amendment 1 TC 96 Cranes ISO/TR * Cranes — Safety code on mobile cranes D 19961:2010 TC 108 Mechanical vibration, shock and condition monitoring ISO 14839- Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: XZ 1:2002/Amd Vocabulary — Amendment 1 1:2010 TC 109 Oil and gas burners ISO * Forced draught gas burners X 22967:2010 ISO * Forced draught oil burners W 22968:2010 TC 117 Fans ISO Industrial fans — Specifications for balance quality and vibration levels — Amendment 1 XZ 14694:2003/A md 1:2010 TC 131 Fluid power systems ISO 10041- Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 1: Main characteristics G 1:2010 to include in the supplier's literature ISO 10041- Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 2: Test methods to M 2:2010 determine main characteristics to include in the supplier's literature ISO 10094- Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to H 1:2010 include in the supplier's literature ISO 10094- Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine N 2:2010 main characteristics to include in the supplier's literature ISO Hydraulic fluid power — Calibration of automatic particle counters for liquids T 11171:2010 TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 15877- Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — XZ 1:2009/Amd Part 1: General — Amendment 1 1:2010 ISO 15877- Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — XZ 2:2009/Amd Part 2: Pipes — Amendment 1 1:2010 ISO 15877- Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — XZ 3:2009/Amd Part 3: Fittings — Amendment 1 1:2010 ISO 15877- Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — XZ 5:2009/Amd Part 5: Fitness for purpose of the system — Amendment 1 1:2010 TC 145 Graphical symbols ISO 28564- Public information guidance systems — Part 1: Design principles and element requirements for location K 1:2010 plans, maps and diagrams TC 147 Water quality ISO 7827:2010 Water quality — Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an G aqueous medium — Method by analysis of dissolved organic carbon (DOC) ISO 5667- * Water quality — Sampling — Part 21: Guidance on sampling of drinking water distributed by tankers or H 21:2010 means other than distribution pipes TC 161 Control and protective devices for gas and/or oil burners and appliances ISO 23551- * Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part XZ 4:2005/Amd 4: Valve-proving systems for automatic shut-off valves — Amendment 1: Application guidance for the 1:2010 valve-proving system TC 163 Thermal performance and energy use in the built environment ISO 12567- * Thermal performance of windows and doors — Determination of thermal transmittance by the hot-box free 1:2010/Cor method — Part 1: Complete windows and doors — Technical Corrigendum 1 1:2010 TC 164 Mechanical testing of metals ISO 1143:2010 * Metallic materials — Rotating bar bending fatigue testing M TC 172 Optics and photonics ISO 17123- * Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part Q 1:2010 1: Theory ISO Ophthalmic optics — Contact lenses and contact lens care products — Determination of preservative C 11986:2010 uptake and release TC 184 Automation systems and integration