Jersey City Terminal Interlocking C

Jersey City Terminal Interlocking C

Jersey City Terminal Interlocking C. R. R. of N. J. Is Installing Three Large Electro­ Pneumatic Plants at Entrance to Station and Yards As a part oi the reconstruction and rearrangement of the the station and New York City, the schedules are arranged in main line tracks and the yards adjacent to its passenger terminal many cases so that several trains will arrive or depart at a time at Jersey City, N. J ., the Central Railroad of New Jersey has that will allow close boat connections, thus further aggravating installed a new electro-pneumatic interlocking plant with 592 the tendency to congestion during certain parts of the rush operated units, and changed certain features of another plant hours. The maximum number of trains regularly handled into with 233 operated units to conform with the new standards. The and out of the station in one hour is about 38. In addition to terminal interlocking consists of three plants . Tower A, the these scheduled trains, a large number of movements are neces­ new one, governs the entrance to the new 20-track train shed, sary in making up trains from the coach yards, pulling out empty the 9-track throat, and the leads to the coach yards, etc. Tower trains after their inbound runs, and in handling locomotives to B, which was built in connection with the work on the new and from the engine terminal. This terminal handles from 225 Two of the Long Signal Bridges In the Jersey Terminal. The One In the Foreground Spana Ten Tracks and Has a Two-Track Cantl, lever End. engine terminal, controls the entrance to that terminal which to 300 locomotives per day, including the freight engines. which is located south of the main line about one mile west of the also pass through the interlocking plant at tower B. station . Tower C, which has been altered, controls the junction TRACK LAYOUT . of the main line with the Newark branch, about one-half mile The layout at the three plants is shown in the accompanying further west. plans. There are seven main tracks-two inbound and two out­ TRAFFIC. bound main line tracks and one inbound and two outbound for In addition to the Central of New Jersey, this terminal is the Newark branch. There are also two engine leads and a used by the Philadelphia & Reading, the Baltimore & Ohio, and running track to the coach yards paralleling these main tracks. the Lehigh Valley, the maximum number of trains in 24 hours The engine leads are normally operated left-handed between amounting to about 200 each way. The Reading and the Balti­ the station and Communipaw. The second outbound Newark more & Ohio trains are operated by the Jersey Central in the branch track, extending as far as Communipaw , was added in same way as its own service, but the Lehigh Valley, with about order to allow a heavy through train, operating over the Newark 12 trains each way daily, operates separately, using the main branch, and a Newark suburban train, scheduled to leave at the line Jersey Central tracks for about 10 miles. As the Jersey same time, to pull out together and both keep moving. The Central suburban business is very heavy, the number of trains is lighter train can reach Communipaw and make the station stop much greater than normal during the morning and evening rush while the other train is reaching that point and passing it a hours, and as all passengers use the ferry-boat service between sufficient distance to allow both to proceed at a safe interval on 96 Digitized by Google April, 1915 THE SIGNAL ENGINEER 97 the same track. In addition to the Lehigh Valley and suburban old plant used two-position, lower-quadrant signaling, while in trains, a few Jersey Central main line and Shore trains are the new installation three-position, upper-quadrant speed signal­ operated over the branch connecting with the main line again ing, conforming to the R. S. A. recommendations, was adopted. at Elizabethport. Since all movements within the limits of this plant are at mod­ The nine-track throat of the yard is crossed by four ladder erate speed, the high speed blade was omitted. The upper of tracks, two in each direction. At the west end, two of these the two arms governs in all cases over all routes fully equipped tracks are extended to the north to include four yard receiving with track circuits, and the l<;>werarm, those not fully equipped. tracks. At the east end, the layout is expanded to embrace the The aspects and indications are shown in the accompanying 20 train shed tracks, the four main ladders being supplemented diagram. by five additional ladder tracks, two on the north side, and The new plant was put in service in six stages. The first step three on the south. The layout provides for connection between was coincident with the opening of the new engine terminal last MACMl!Yt SC!tEMt 8ZLevers for sw,fches 63LeverJfor s,qnol::, 145 Workmq /even 34 Jpore levers 179 Lever frame Tmcir Mo II Yardlerxts / fnq.lrods / toMo,r, f B.Bronch ) WBBrord1 WfJ.Mam i}!~]~i1lil~i~111]§]1ll)Yard lead5 Track and Signal Layout at Tower A, Jersey City Terminal. MAC/7/1'1[ ..5C.'1c."1f'. Jl·L,m::rsfor/lswdcne,. lloer01/5 and 7 doubleshps wdh M PF:~ 13-Leversfo6 l6,,qnalsand Ide,, 1,,:k (?BR) fnq.lt<xJ5{ '5·Roule!even f./1/tfa,n /·Leverfor /check.foe;, (42R) WB.Mom 40-Workmqlever::, t.8.Brad~:::::::::::::::::::::::::::::::::::::::::::::::::::::::::'.~!~!~~===============f~ · 7-5pare levers l-?-4 ·44·45·4G-47 WBIJronch 47·Lever frame Track and Signal Layout B (continuation from above). ~t~~ MACHI/YE SCntM[ Newark bronc!, 3/· Leve0 for swdches elc ZB·levers for ,,qna/5 15 5- lever, rorcheck locJ:s !8R·20R· 22R·24R·6.9R 16l 71 64 · Workinq levers IOL - 7· Spare levers /·J ·/7·/ 9·52 ·55-10 8L 7/· l(YEr rra,.,e Track and Signal Layout at Tower C (continuation from above). the seven northerly tracks and the north yard, and between the May, when temporary work became necessary at the old tower 2, ten southerly tracks and the south yard, outside of the limits to get the engines in and out. In many cases it was necessary of the main throat. It is also possible to make six simultaneous for an engine to run to Communipaw and back, as it was im­ moves between the train shed tracks and the coach yard, and at possible to reach the northerly five station tracks without a the same time, make four moves between the main tine and the reverse movement. The second step consisted of abo_ut 40 per central train shed tracks. The layout consists of No. 9 slip cent of the plant, including as much of the throat of the yard switches and turnouts with three exceptions where larger number as could be completed at that time. The control of these func­ turnouts are used. tions was transferred to the new machine on November 15, allow­ ing engines to move directly to and from the engine terminal. INSTALLATION OF TOWER A. In the third move, the new ladders were connected to the west The plant at tower A replaces two old mechanical plants, one coach yard, putting the old tower 2 entirely out of service. The of which had been enlarged by the installation of a 29-lever, fourth move was to connect up the five northerly house tracks electro-pneumatic machine to handle the additional tracks put with the new plant, and the fifth move included the leads to the in service as the work on the new train shed progressed. The south side. The last step, which was to connect up the middle Digitized by Google 98 THE SIGNAL ENGINEER Vol. 8, No. 4 seven tracks in the shed, was completed on March 20, thereby entering the plant. Approach indicator lights and bells with a placing the entire plant in service. different tone for each track warn the train director of the ap­ The new tower A is located about 750 ft. west of the end of proach of a train, the lights being extinguished ud the bell the train shed and south of the main tracks. It is a steel frame stopped by depressing a button under the lever of the home structure with brick walls supported on piles driven about 65 ft. signal for that block. Train-describing instruments are also to rock, cut off at low water level, and capped by reinforced used for apprising the train director at the next tower of the concrete beams. The floors are of concrete, the upper one being class of train that is approaching. Another indicator shows finished with Taylorite surface and wainscoting. The roof is of slate with copper cornice, and Lupton steel sash are provided for all windows, making the building fireproof throughout, with the exception of the wooden relay rack. INTERLOCKING MACHINE. The interlocking machine is the Union Switch & Signal Com­ pany's electro-pneumatic type, having a number of improved features. It has a 179-lever frame, 34 of the levers being spare. The working levers control 41 single switches, I I derails, 38 double-slip switches with movable-point frogs, 3 single-slip switches with movable-point frogs, 204 signals, blades having •292 positions, and 9 locks between towers. The machine has an enameled steel case and the track diagram will be suspended from the ceiling over the machine, in a steel case matching that of the machine.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    6 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us