Owner’s Manual Thank you, and congratulations on your choice of the BOSS RC-50 Loop Station. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4–5) These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. ■ Printing Conventions in This Manual • Text or numerals enclosed in square brackets [ ] indicate buttons. [WRITE] WRITE button [EXIT] EXIT button • EXP pedal is an abbreviation of “expression pedal.” • Reference such as (p. **) indicate pages in this manual to which you can refer. Copyright © 2005 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. G********** ‘04-10-1 USING THE UNIT SAFELY Used for instructions intended to alert The symbol alerts the user to important instructions the user to the risk of death or severe or warnings.The specific meaning of the symbol is injury should the unit be used determined by the design contained within the improperly. triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of injury or material The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that damage should the unit be used must not be done is indicated by the design contained improperly. within the circle. In the case of the symbol at left, it * Material damage refers to damage or means that the unit must never be disassembled. For the U.K. other adverse effects caused with The ● symbol alerts the user to things that must be respect to the home and all its carried out. The specific thing that must be done is IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. furnishings, as well to domestic indicated by the design contained within the circle. In animals or pets. the case of the symbol at left, it means that the power- BLUE: NEUTRAL cord plug must be unplugged from the outlet. BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. 001 009 Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug. • Before using this unit, make sure to read the • Do not excessively twist or bend the power cord, instructions below, and the Owner’s Manual. nor place heavy objects on it. Doing so can For EU Countries damage the cord, producing severed elements .......................................................................................................... This product complies with the requirements of European Directive 89/336/EEC. 002c and short circuits. Damaged cords are fire and • Do not open (or modify in any way) the unit or its shock hazards! AC adaptor. .......................................................................................................... 010 For the USA .......................................................................................................... • This unit, either alone or in combination with an 003 amplifier and headphones or speakers, may be FEDERAL COMMUNICATIONS COMMISSION • Do not attempt to repair the unit, or replace parts capable of producing sound levels that could RADIO FREQUENCY INTERFERENCE STATEMENT within it (except when this manual provides cause permanent hearing loss. Do not operate for specific instructions directing you to do so). Refer This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the a long period of time at a high volume level, or at all servicing to your retailer, the nearest Roland FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential a level that is uncomfortable. If you experience installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in Service Center, or an authorized Roland any hearing loss or ringing in the ears, you should accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee distributor, as listed on the “Information” sheet. immediately stop using the unit, and consult an that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or .......................................................................................................... television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 004 audiologist. interference by one or more of the following measures: • Never use or store the unit in places that are: .......................................................................................................... – Reorient or relocate the receiving antenna. 011 – Increase the separation between the equipment and receiver. • Subject to temperature extremes (e.g., direct • Do not allow any objects (e.g., flammable – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. sunlight in an enclosed vehicle, near a heating material, coins, pins); or liquids of any kind – Consult the dealer or an experienced radio/TV technician for help. duct, on top of heat-generating equipment); or (water, soft drinks, etc.) to penetrate the unit. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: are (1) This device may not cause harmful interference, and • Damp (e.g., baths, washrooms, on wet floors); (2) This device must accept any interference received, including interference that may cause undesired operation. or are .......................................................................................................... Unauthorized changes or modification to this system can void the users authority to operate this equipment. 012b This equipment requires shielded interface cables in order to meet FCC class B Limit. • Humid; or are • Immediately turn the power off, remove the AC • Exposed to rain; or are adaptor from the outlet, and request servicing by For Canada • Dusty; or are your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on • Subject to high levels of vibration. the “Information” sheet when: NOTICE .......................................................................................................... This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 007 • The AC adaptor, the power-supply cord, or the • Make sure you always have the unit placed so it is plug has been damaged; or level and sure to remain stable. Never place it on • If smoke or unusual odor occurs AVIS stands that could wobble, or on inclined surfaces. • Objects have fallen into, or liquid has been Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. .......................................................................................................... spilled onto the unit; or 008c • Be sure to use only the AC adaptor supplied with • The unit has been exposed to rain (or otherwise For the USA the unit. Also, make sure the line voltage at the has become wet); or DECLARATION OF CONFORMITY installation matches the input voltage specified on • The unit does not appear to operate normally the AC adaptor’s body. Other AC adaptors may or exhibits a marked change in performance. Compliance Information Statement use a different polarity, or be designed for a .......................................................................................................... Model Name : RC-50 different voltage, so their use could result in Type of Equipment : Loop Station damage, malfunction, or electric shock. Responsible Party : Roland Corporation U.S. .......................................................................................................... Address : 5100 S.Eastern Avenue, Los Angeles, CA 90040-2938 Telephone : (323) 890-3700 2 013 101b • In households with small children, an adult • The unit and the AC adaptor should be located so should provide supervision until the child is their location or position does not interfere with capable of following all the rules essential for the their proper ventilation. safe operation of the unit. .......................................................................................................... 102c .......................................................................................................... • Always grasp only the plug on the AC adaptor 014 cord or the body of the AC adaptor when • Protect the unit from strong impact. plugging into, or unplugging from, an outlet or (Do not drop it!) this unit. .........................................................................................................