NICHIA STS-DA1-1565D <Cat.No.201106> NICHIA CORPORATION SPECIFICATIONS FOR WARM WHITE LED PART NO. NESL064AT ● Pb-free Reflow Soldering Application ● ESD Withstand Voltage (HBM) Class 3B ● RoHS Compliant ● IATF 16949 Compliant NICHIA STS-DA1-1565D <Cat.No.201106> SPECIFICATIONS (1) Absolute Maximum Ratings Item Symbol Absolute Maximum Rating Unit Forward Current IF 30 mA Pulse Forward Current IFP 100 mA ESD Withstand Voltage (HBM) VESD 8 kV Allowable Reverse Current IR 85 mA Power Dissipation PD 105 mW Operating Temperature Topr -40~110 °C Storage Temperature Tstg -40~110 °C Junction Temperature TJ 125 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%. * HBM ESD Component Classification Level of the LEDs: Class 3B For more details, see ANSI/ESDA/JEDEC JS-001. (2) Initial Electrical/Optical Characteristics Item Symbol Condition Typ Unit Forward Voltage VF IF=20mA 3.1 V IF=20mA 1.3 Luminous Intensity Iv cd IF=30mA 1.8 x IF=20mA 0.41 Chromaticity Coordinate - - y IF=20mA 0.39 RθJS - 180 Thermal Resistance °C/W RθJA - 360 * Characteristics at TA=25°C. * Chromaticity Coordinates as per CIE 1931 Chromaticity Chart. * RθJS is the thermal resistance from the junction to the TS measurement point. * RθJA is Thermal Resistance from junction to ambient（Test board: FR4 board thickness=1.6mm, copper layer thickness=35μm）. 1 NICHIA STS-DA1-1565D <Cat.No.201106> RANKS Item Rank Min Max Unit Forward Voltage - 2.8 3.5 V V 1.44 2.00 Luminous Intensity U 1.00 1.44 cd T 0.72 1.00 Color Ranks Rank d1 x 0.3575 0.3610 0.3780 0.3988 0.3897 0.3720 y 0.3612 0.3850 0.3970 0.4116 0.3823 0.3714 Rank d2 x 0.3545 0.3575 0.3720 0.3897 0.3822 0.3667 y 0.3408 0.3612 0.3714 0.3823 0.3580 0.3484 Rank e1 x 0.3897 0.3988 0.4162 0.4390 0.4255 0.4053 y 0.3823 0.4116 0.4200 0.4310 0.4000 0.3907 Rank e2 x 0.3822 0.3897 0.4053 0.4255 0.4129 0.3954 y 0.3580 0.3823 0.3907 0.4000 0.3725 0.3642 Rank f3 Rank f4 x 0.4255 0.4390 0.4680 0.4519 x 0.4519 0.4680 0.4970 0.4770 y 0.4000 0.4310 0.4385 0.4086 y 0.4086 0.4385 0.4466 0.4137 Rank f5 Rank f6 x 0.4129 0.4255 0.4519 0.4355 x 0.4355 0.4519 0.4770 0.4588 y 0.3725 0.4000 0.4086 0.3785 y 0.3785 0.4086 0.4137 0.3838 * Ranking at TA=25°C. * Forward Voltage Tolerance: ±0.05V * Luminous Intensity Tolerance: ±7% * Chromaticity Coordinate Tolerance: ±0.005 * LEDs from the above ranks will be shipped. The rank combination ratio per shipment will be decided by Nichia. 2 NICHIA STS-DA1-1565D <Cat.No.201106> CHROMATICITY DIAGRAM 0.50 0.45 f4 f3 e1 y 0.40 f6 f5 d1 e2 d2 0.35 0.30 0.35 0.40 0.45 0.50 0.55 x 3 NICHIA STS-DA1-1565D <Cat.No.201106> OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 NxSL064x This product complies with RoHS Directive. 管理番号 No. STS-DA7-0428B * 括弧で囲まれた寸法は参考値です。 (単位 Unit: mm, 公差 Tolerance(単位 Unit: :±0.2) mm) The dimension(s) in parentheses are for reference purposes. (0.45) 2.8 2.2 (2.4) (1.05) (0.8) Cathode Mark (2.4) 2±0.3 3.2 (0.4) 0.8±0.3 (1.9) 0.8±0.3 3.5±0.3 Anode Cathode 項目 Item 内容 Description パッケージ材質 耐熱性ポリマー Package Materials Heat-Resistant Polymer 封止樹脂材質 シリコーン樹脂(蛍光体入り） Encapsulating Resin Silicone Resin(with phosphor) Materials 電極材質 銅合金+銀メッキ Electrodes Materials Ag-plated Copper Alloy 質量 Weight 0.036g(TYP) K A 保護素子 Protection Device 4 NICHIA STS-DA1-1565D <Cat.No.201106> SOLDERING • Recommended Reflow Soldering Condition(Lead-free Solder) • Recommended Hand Soldering Condition Temperature 350°C Max Soldering Time 3sec Max 1 to 5°C per sec 260°CMax 10sec Max Pre-heat 180 to 200°C 60sec Max Above 220°C 120sec Max ● Recommended Soldering Pad Pattern 9.5 4 4 1.5 1.5 4 2.6 (単位 Unit: mm) Blank boxes: Solder resist opening , Shaded areas: Footprint * This LED is designed to be reflow soldered to a PCB. If dip soldered, Nichia will not guarantee its reliability. * Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once. * When cooling the LEDs from the peak temperature a gradual cooling slope is recommended; do not cool the LEDs rapidly. * During reflow soldering, the heat and atmosphere in the reflow oven may cause the optical characteristics to degrade. In particular, reflow soldering performed with an air atmosphere may have a greater negative effect on the optical characteristics than if a nitrogen atmosphere is used; Nichia recommends using a nitrogen reflow atmosphere. * This LED uses a silicone resin for the encapsulating resin; the silicone resin is soft. If pressure is applied to the silicone resin, it may cause the resin to be damaged, chipped, delaminated and/or deformed. If the resin is damaged, chipped, delaminated and/or deformed, it may cause the wire to break causing a catastrophic failure (i.e. the LED not to illuminate) and/or reliability issues (e.g. the LED to corrode and/or to become dimmer, the color/directivity to change, etc.). Ensure that pressure is not applied to the encapsulating resin. * Once the LEDs have been soldered to a PCB, it should not be repaired/reworked. If it must be done, using a double-head soldering iron is strongly recommended. Ensure that sufficient verification is performed prior to use to ensure that the repair/rework has not caused the LED characteristics to deteriorate. * When soldering, do not apply stress to the LED while the LED is hot. * When using an automatic pick-and-place machine, choose an appropriate nozzle for this LED. Using a pick-and-place nozzle with a smaller diameter than the size of the LED's emitting surface will cause damage to the emitting surface causing a catastrophic failure (i.e. the LED not to illuminate). * The soldering pad pattern above is a general recommendation for LEDs to be mounted without issues; if a high degree of precision is required for the chosen application (i.e. high-density mounting), ensure that the soldering pad pattern is optimized. * Consider factors such as the reflow soldering temperature, hand soldering temperature, etc. when choosing the solder. * When flux is used, it should be a halogen free flux. Ensure that the manufacturing process is not designed in a manner where the flux will come in contact with the LEDs. * Ensure that there are no issues with the type and amount of solder that is being used. 5 NICHIA STS-DA1-1565D <Cat.No.201106> TAPE AND REEL DIMENSIONS テーピング部 Tape Nxxx064x 管理番号 STS-DA7-0165A No. ±0.1 0.25±0.05 (単位 Unit: mm) +0.1 ±0.1 Φ1.5 -0 4 ±0.05 2 1.75 Cathode Mark ±0.05 0.1 - +0.3 ±0.1 3.5 8 3.65 ±0.1 ±0.1 2.15 4 +0.25 Φ1 -0 2.85±0.1 エンボスキャリアテープ Embossed Carrier Tape トレーラ部/リーダ部 Trailer and Leader トップカバーテープ Top Cover Tape 引き出し方向 Feed Direction トレーラ部最小160mm（空部） LED装着部 引き出し部最小100mm（空部） Trailer 160mm MIN(Empty Pockets) Loaded Pockets Leader with Top Cover Tape 100mm MIN(Empty Pocket) リーダ部最小400mm Leader without Top Cover Tape 400mm MIN リール部 Reel ±1 +0 11.4 180 -3 9±0.3 * 数量は1リールにつき 2000個入りです。 Reel Size: 2000pcs * JIS C 0806電子部品テーピングに準拠しています。 The tape packing method complies with JIS C 0806 (Packaging of Electronic Components on Continuous Tapes). 0 - +1 * 実装作業の中断などでエンボスキャリアテープをリールに巻き取る場合、 60 エンボスキャリアテープを強く(10N以上)締めないで下さい。 Φ LEDがカバーテープに貼り付く可能性があります。 When the tape is rewound due to work interruptions, no more than 10N should be applied to the embossed carrier tape. ラベル The LEDs may stick to the top cover tape. Label 6 NICHIA STS-DA1-1565D <Cat.No.201106> PACKAGING - TAPE & REEL Reels are shipped with desiccants in heat-sealed moisture-proof bags. Part No. Nxxxxxxx シリカゲルとともにリールをアルミ防湿袋に入れ、熱シールにより封をします。 No. STS-DA7-0006F Label ラベル Reel Desiccants リール シリカゲル XXXX LED PART NO.: Nxxxxxxx ******* LOT: YMxxxx-RRR QTY.: PCS RoHS Seal NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN 熱シール Moisture-proof Bag アルミ防湿袋 Moisture-proof bags are packed in cardboard boxes with corrugated partitions. アルミ防湿袋を並べて入れ、ダンボールで仕切ります。 Label ラベル XXXX LED PART NO.: Nxxxxxxx ******* RANK: RRR QTY.: PCS RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN * ******* is the customer part number. Nichia LED If not provided, it will not be indicated on the label. 客先型名を*******で示します。 客先型名が設定されていない場合は空白です。 * For details, see "LOT NUMBERING CODE" in this document. ロット表記方法についてはロット番号の項を 参照して下さい。 * The label does not have the RANK field for un-ranked products. ランク分けがない場合はランク表記はありません。 * Products shipped on tape and reel are packed in a moisture-proof bag. They are shipped in cardboard boxes to protect them from external forces during transportation. 本製品はテーピングしたのち、輸送の衝撃から保護するためダンボールで梱包します。 * Do not drop or expose the box to external forces as it may damage the products. 取り扱いに際して、落下させたり、強い衝撃を与えたりしますと、製品を損傷させる原因になりますので注意して下さい。 * Do not expose to water. The box is not water-resistant. ダンボールには防水加工がされておりませんので、梱包箱が水に濡れないよう注意して下さい。 * Using the original package material or equivalent in transit is recommended. 輸送、運搬に際して弊社よりの梱包状態あるいは同等の梱包を行って下さい。 7 NICHIA STS-DA1-1565D <Cat.No.201106> LOT NUMBERING CODE Lot Number is presented by using the following alphanumeric code. YMxxxx - RRR Y - Year Year Y 2019 J 2020 K 2021 L 2022 M 2023 N 2024 O M - Month Month M Month M 1 1 7 7 2 2 8 8 3 3 9 9 4 4 10 A 5 5 11 B 6 6 12 C xxxx-Nichia's Product Number RRR-Ranking by Color Coordinates, Ranking by Luminous Intensity 8 NICHIA STS-DA1-1565D <Cat.No.201106> DERATING CHARACTERISTICS NESx064x 管理番号 No.