Generating Precise FMCW and Chirp Radar Test Signals with Low-Cost Devices

Generating Precise FMCW and Chirp Radar Test Signals with Low-Cost Devices

TECHNICAL BRIEF Generating Precise FMCW and Chirp Radar Test Signals with Low-cost Devices RF/microwave signal generators offering high speed frequency modulated continuous wave (FMCW) and frequency modulation on pulse (FMOP), or “chirp” capabilities, are depended on by radar system engineers in many fields. In particular, those designing microwave test sets for receivers in highly precise radar systems, such as anti-spoofing and anti-jamming applications. To achieve the reliable FMCW and chirp modulation necessary, one would typically rely on a full-featured bench-top unit. But many are discovering that today’s robust, portable, and programmable RF/microwave signal generators offer a real, low-cost, and flexible alternative. This Tech Brief provides insight on this self-managed approach and offers tips and tricks on how to get up and running fast and with confidence in every pulse. TECHNICAL BRIEF Generating Precise FMCW and Chirp Radar Test Signals with Low-cost Devices Intoduction ........................2 FMCW and Chirp Modulation Radar .....3 The Signal Generator’s Key Role ........5 Chirp Radar Field Test Challenges .......6 Anti-jamming/Anti-spoofing Radar Test with Multiple Signal Generators .....6 Conclusion ........................7 Testing in Remote Locations or in Harsh Conditions is a Challenge for Traditional Bench-top Test Instruments. Frequency modulated continuous wave However, there are still uses and the laboratory or the field. In the (FMCW) radar technology was devel- benefits to older radar techniques, case of field testing, chirp radar can oped back in the 1950s following such as linear FMCW for aircraft height be found in harsh environments from World-War II to provide better resolu- measurement during landing proce- remote radar locations, naval plat- tion and discrimination of radar dures, automotive radar, smart ammu- forms, aircraft maintenance facilities, targets. Once unclassified in the 1960s, nition sensors, liquid filling levels of or even servicing land-mobile systems there has been steady development of tanks and bulk solids in silos, and wherever they may be. radar technology beyond a simple naval tactical navigation radar. linear FMCW chirp to more advanced Given that a significant amount of radar technologies, such as coherent An extremely useful tool in develop- FMCW and chirp radars use frequen- pulsed radar using pulse compression ment and testing of FMCW radar and cies well into the microwave and techniques. These techniques have more advanced chirp radar is a signal millimeter-wave spectrum, such as resulted in frequency modulated chirp generator with frequency sweeping C-band, X-band, and Ku-band, the test (FM Chirp), barker codes, and other and with chirp modulation, which may equipment used to develop and test more complex modulated pulse also be used to develop and test pulse these radars are general large bench- compression radar techniques. compression techniques and devices in top devices with a wide range of www.vaunix.com Page 2 TECHNICAL BRIEF Generating Precise FMCW and Chirp Radar Test Signals with Low-cost Devices built-in features and a price-tag to re-calibrate, which most often must be modulation. Fortunately, Vaunix match their size. Moreover, large done at a certified facility taking weeks produces LabBrick signal generators bench-top signal generators are of lead time on repairs. that are portable, programmable, and typically designed for laboratory can produce self-triggered and exter- conditions, and usually don’t operate A modern and much more viable nally triggered chirp modulation, phase well in extreme environments. This is solution for many space constrained continuous linear frequency sweep, especially true if there is a substantial and rugged applications is the use of and pulse modulation. These devices amount of vibration or shock forces a portable signal generator. However, aren’t much larger than a standard occurring during transportation of most of the portable signal generators wallet, and are available at a fraction these units. Along with a high price- on the market do not reach common of the cost of repairing a typical tag, these bench-top units are also FMCW and chirp radar bands, and bench-top signal generator with generally expensive to repair and don’t offer any form of chirp or pulse the same capabilities. FMCW and Chirp Modulation Radar FMCW modulation is similar to contin- FMCW waveforms are sawtooth, The basic concept of FMCW modula- uous wave (CW) radar modulation triangular, square-wave, and stepped, tion is that the received signal from with the exception that instead of or staircase, modulation, though the an object is mixed with the transmitted holding a single tone the frequency most common is saw-toothed or signal producing an intermediate of the CW radar increases or decreases “swept-frequency” FMCW radar. frequency (IF) tone that is proportional linearly, or non-linearly. Common to the delay, hence distance to the object. Multiple objects will produce multiple tones, which can be separated f f and identified using a Fourier Trans- t Δ TX Chirp form. The result is an FMCW radar that RX Chirp consists of a relatively simple circuit with a transmitter, receiver, FMCW Δ f synthesizer, mixer, digitizer, signal fD S processor, and display. In the case of t1 t t a radio altimeter, the IF signal is sent f directly to an analog gauge with a A TC frequency dependent coil meter that exhibits greater inductive impedance at higher frequencies (though not linear, IF Signal this is still an effective method for t S determining relative altitude). f t (Top) FMCW “chirp” signal as a function of time and FMCW radar response and processing. frequency. (Bottom) FMCW “chirp” signal as a function of amplitude and time www.vaunix.com Page 3 TECHNICAL BRIEF Generating Precise FMCW and Chirp Radar Test Signals with Low-cost Devices The benefits of FMCW over CW is that function of pulse width. However, high range resolution experienced by pulse the frequency modulation allows for pulse powers and short pulse widths radars with long pulse widths while much closer minimum range measur- require specialized high power modula- maintaining a high energy pulse ing capability, which is roughly limited tors and transmitters, which are without extremely high peak power to the transmitted signals wavelength. generally large and expensive. Using levels. Frequency modulation on pulse, Moreover, FMCW radar enables the solid-state technology, a pulsed radar or FMOP, is often referred to as “chirp” simultaneous measurement of a can be made much smaller at a radar, though somewhat confusingly, target’s range and its relative velocity possible cost savings, though sol- linear frequency modulation is also with much higher accuracy range id-state technology typically doesn’t often called a chirp signal. measurements than CW. FMCW outperform vacuum tubes in high modulation also can be used to frequency and high pulse power Additional benefits of chirp radar discriminate between multiple targets, applications. is that the broadband and random requires relatively simple circuitry, and distributed noise in the receiver is doesn’t require any pulsing with high Hence, the use of intrapulse modula- greatly reduced by the pulse compres- peak powers. tion and pulse compression allows for sion filtering process, which allows for longer pulse widths at relatively high the sensing of signal returns that are An advancement of this technique is power levels. By modulating a pulse, below the noise floor of the pulse. to combine pulse radar concepts with the benefits of range resolution and This is commonly known as the pulse intrapulse modulation/pulse compres- multi-object discrimination can be compression gain (PCG). Moreover, sion. Pulsed radar performance achieved. Pulse compression is a the pulse compression filter adjusts benefits from extremely high pulsed technique where a longer pulse is the relative phases of the receive signal power and short pulse width, as a processed in shorter sub-pulse seg- frequency components, which actually pulse radar’s range resolution is a ments, thus mitigating the loss of yields better maximum range than -3dB f1 ∑ f2 ∑ f3 VCO ∑ f4 ∑ f5 f5 f4 f3 f t 2 f1 t D A A D f1 f2 f3 f4 f5 FMCW radar block diagram A diagram of the pulse compression circuitry for a linear FM chirp radar. www.vaunix.com Page 4 TECHNICAL BRIEF Generating Precise FMCW and Chirp Radar Test Signals with Low-cost Devices t t The input and output signals of a pulse compression state with the receive signal within the noise and output echo clearly discernible. would be predicted by the standard advanced driver assistance systems circuitry. Long test ranges and precise radar range equation. This phenome- (ADAS), and aerospace altimeter and positioning of radar targets would non is known as the pulse compression other sensing applications. There are otherwise be required to test radar in ratio (PCR). also many legacy radar systems that the field, where a signal generator with are still in use today in aircraft and the appropriate modulation could be The performance of FMCW and chirp naval ships that require servicing used instead to simulate radar targets. radar depend on the performance of and retrofit testing. Moreover, high purity signal generators the radar components. Hence, added can also be used to test the radar noise/noise figure, linearity, phase Signal generators are a key test receivers signal-to-noise (SNR) perfor- noise, and spurious harmonics are all instrument for radar testing, and mance, which can be used to deter- key parameters for the active compo- are most often used to gauge the mine the maximum range capability nents within a radar system. While any performance of the radar receiver of the radar and if that falls within the of the active and passive components within a radar’s transmit/receive signal chain can substantially degrade the Transmitter performance of the radar system, it is Up Conversion extremely important that the frequency Base-band signal synthesizer excels.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    7 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us