RSTS/E System Generation Manual Order No

RSTS/E System Generation Manual Order No

RSTS/E System Generation Manual Order No. AA-26696-TC May 1983 This manual describes the installation procedures for the RSTS/E V8.0 system. OPERATING SYSTEM AND VERSION: RSTS/E V8.0 SOFTWARE VERSION: RSTS/E V8.0 digital equipment corporation, maynard, massachusetts thisusedberesponsibilityinformationissoftwarepostage-paidfollowingdocumentnotconstruedorsupplied©requestscopiedCorporationText1975,AlldescribedareEngineeringinRightsisasManagementREADER'Strademarksonlythisassumedbyyour1977,a commitmentDIGITALdocumentReservedinassumescriticalVTRainbowthisaccordance1978,PublicationsforofCOMMENTSdocumentSystemevaluationtheDigitalor1979,noisbyitssubjectuseresponsibilitywithaffiliatedDigital1981,Equipmentortypesetis toreliabilitythefurnishedtoformassistEquipment1982,changetermscompaniesthisonforDECUSWorkCorporationusofmanual1983theunderofanywithoutinsoftwaresuchlastpreparingProcessorCorporationerrorsbyapageusinglicenselicenseDigitalnoticethatonofDIGITAL'sfutureequipmentEquipmentmayandthisDigitalshouldmayappear The not . Equipment in . The be . No that . Copyright Corporation. The document documentation. The : Digital Professional DEC Commercial TMS-11 . Contents Page Preface xv Summary of Technical Changes xvii Introduction to System Generation What IsSystemGeneration? . 1 Run-TimeRSTS/EMonitorSystems. .. .. .. 21 SystemBundledProgramsSoftware. .. .. 32 TypesOptionalofSystemSoftwareGeneration. .. .. .. .. .. .. 3 HowSystemtoGenerationUseThisManualTools. .. .. 4 SystemGeneration Flowchart. 5 StructurePhaseof1This: GettingManualStarted. 6 Phase32:TailorDiskPreparationSYSGENMonitor. .. .. 6 Phase45:Configure RSTS/EMonitor, Part21. .. 6 Phase76:TailorShutDownRSTS/ESYSGENMonitorMonitor. .. 6 Phase98: TailorBuild/PatchSystemRSX,FilesSystem. .Programs,. .and. .Bundled. .Software. .116 Phase 1110: CreatePrepareBackupforTimesharingofRSTS/E. Monitor. Disk. .. 11 Hardware-RelatedPhase 12:TimesharingTasks. .. 1111 MemoryDevice-RelatedAllocation-RelatedTasks . .Tasks. .. .. 11 Bootstrap-RelatedFile-Related TasksTask. .. .. .. .. .. 1211 PartThreeTwo: :PerformingPerformingaanSystemOnlineGenerationSystemGenerationtoUpgrade.a.RSTS/E. .Monitor. .. 12 AppendixAB:SystemDevice TestingGenerationPackageError(DEVTST)Messages. .. 12 AppendixDC:RSTS/EAddress SystemandVectorLibraryAssignmentsControl Files. .. .. 12 AppendixFE: SystemBootstrappingGenerationtheDistributionExample. Medium. .. 12 Part I Performing a System Generation to Build a New RSTS/E Monitor Phase 1 Getting Started 1: Collect Distribution Kits and Documentation. 13 Task 2: Check Distribution KitOrder Numbers . 15 Task 3A: Physically Mountand Bootstrap Distribution Tape . 16 Tape Mount Session. 16 Bootstrap Distribution Tape Session. 16 Task 313: Physically Mount and Bootstrap Distribution Disk. 18 Disk Mount Session . 18 Bootstrap Distribution Disk Session . 18 Phase 2 Disk Preparation Task 1: Physically MountYour System Disk . 22 Task 2: Initialize Your System Disk (DSKINT) . 23 Terminal Session . 23 Task 3: Copy Files to Your System Disk (COPY) . 35 Terminal Session . 35 Task 4: Physically MountNonsystem Disk . 38 Task 5: Initialize Nonsystem Disk (DSKINT). 39 Terminal Session . 39 Task 6: Calculate Number of Jobs . 47 Preparation Session . 47 Task 7: Calculate SWAP MAX. 49 Preparation Session . 49 Task 8: List File Status Table (REFRESH LIST) . 51 Terminal Session . 51 Task 9: Create System Files (REFRESH CHANGE) . 54 Planning Session . 54 Planning theSWAP.SYS File . 55 Planning theSWAPO.SYS and SWAPLSYS Files. 56 Planning theSWAP3.SYS File . 56 Planning the OVR.SYS File . 57 Planning the ERR.SYS File . 58 Planning the BUFF.SYS File . 58 Planning the CRASH.SYS File . 58 Terminal Session . 60 Task 10: List File Status Table (REFRESH LIST) . 66 Phase 3 Tailor SYSGEN Monitor Task 1: Install SYSGEN Monitor (INSTALL) . 70 Terminal Session . 70 Task 2: Establish SYSGEN Monitor Defaults (DEFAULT) . 72 Terminal Session . 72 Phase 4 Configure RSTS/E Monitor, Part I Task 1: Start SYSGEN Monitor (START). 78 Terminal Session . 78 Task 2A: Make Sure Distribution Tape Is Physically Mounted . 81 Task 213: Logically Mount Distribution Disk . 81 Logically Mount Distribution Disk Session . 81 Task 3: Run CREATE.SAV Program . 82 Terminal Session . 82 Task 4: Answer General Configuration Questions . 84 Terminal Session . 84 Task 5: Answer Terminal Interface Configuration Questions . 92 Terminal Session . 92 Task 6: Answer Disk Units Configuration Questions . 100 Terminal Session . 100 Task 7: Answer Peripheral Devices Configuration Questions . 104 Terminal Session . 104 Task 8: Answer Software Tuning and Features Configuration Questions. 112 Terminal Session . 112 Task 9: Answer BASIC-PLUS Configuration Questions . 118 Terminal Session . 118 Phase 5 Configure RSTS/E Monitor, Part II Task 1: Run SYSBAT.SAV Program . 123 Terminal Session . 123 Phase 6 Shut Down SYSGEN Monitor Task 1: Run UTILTY Program. 127 Phase 7 Tailor RSTS/E Monitor Task 1: Install RSTS/E Monitor (INSTALL) . 130 Terminal Session . 130 Task 2: Establish RSTS/E Monitor Defaults (DEFAULT) . 133 Terminal Session . 133 Task 3: List File Status Table for RSTS/E Monitor (REFRESH LIST) . 141 Terminal Session . 141 Task 4: StartYour RSTS/E Monitor . 144 Terminal Session . 144 Phase 8 Build/Patch RSX, System Programs, and Bundled Software Task 1A: Physically MountRSTS/E Update Tape . 148 Tape Mount Session. 148 Task 1B: Physically and Logically MountRSTS/E Update Disk . 149 Disk Mount Session . 149 Task 2: Copy Patch Files and Replacement Modules . 152 Terminal Session . 152 Task 3: Build/Patch RSX Primary Run-Time System . 155 Terminal Session . 155 Task 4: Build/Patch System Programs . 159 Terminal Session . 159 Task 5: Build/Patch RSX as Auxiliary Run-Time System . 171 Terminal Session . 171 Task 6: Build Record Management Services (RMS-11) . 173 Terminal Session . 173 Task 7: Build SORT Utility Package . 176 Terminal Session . 176 Task 8: Build EDT Text Editor. 178 Terminal Session . 178 Phase 9 Tailor System Files Task 1: Tailor System Message Files (NOTICE.TXT and HELP.TXT) . 181 Terminal Session . 181 Task 2: Tailor System Control Files (START.CTL and CRASH.CTL) . 183 Terminal Session . 183 Phase 10 Prepare for Timesharing Task 1: Create User Accounts . 185 Terminal Session . 185 Task 2: Shut Down RSTS/E Monitor. 187 Terminal Session . 187 Phase 11 Create Backup of System Disk Task 1: Save System Disk onto Another Disk or Tape . 189 Disk or Tape . 189 TerminalMount andSessionInitialize. Backup. System. 189 Phase 12 Timesharing Task 1: Start Timesharing. 193 Terminal Session . 193 Conditional Tasks . .195 Hardware-Related Tasks (HARDWR Suboptions) List the Hardware Configuration Table (HARDWR LIST) . 198 Terminal Session . 198 Disable a Device Controller (HARDWR DISABLE) . .203 Terminal Session . ..

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    484 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us