CONTINUING EDUCATION PROGRAMS MATERIALS LIST Course: SC 602EI / Introduction to Stone Carving Instructor: Morgan Dummitt Days/Dates: 12 weeks, Mondays, September 23 – December 9 Time: 6 – 9 p.m. Location: Room 760, 7th Floor / Samuel M.V. Hamilton Building 128 N. Broad Street, Philadelphia, PA 19102 (Use Student Entrance on Lenfest Plaza / Cherry Street) All work will be done in limestone, the traditional carving stone of Europe’s cathedrals. If students wish to work in another material such as marble or alabaster, this can be discussed during the first class. (materials fee includes stone) Required Tools: 1. Point Chisel (Sculpture House brand, Dick Blick) 2. Four Toothed Chisel (Dick Blick) 3. ¾” Flat Chisel (Dick Blick) 4. 1.5 lb soft iron hammer (Dick Blick) 5. All required chisels may be purchased in the “Sculpture House Stone Sculpture Tool Set” from Dick Blick Suggested Tools: 1. Four tooth finishing chisel (Milani Brand, can be purchased from The Complete Sculptor) or (Sculpture House Brand, can be purchased individually from The Complete Sculptor or as part of a set from Dick Blick) 2. Pitch or blocking chisel (Milani Brand, The Complete Sculptor) 3. Medium rasp (Sculpture House Brand, R28, Dick Blick) 4. A wider variety of tooth, rondel, and flat chisels will aid students and will be discussed during class. I suggest purchasing the “required tools” in a set from Dick Blick for the first class, and adding additional tools as required. Tool Purchasing Links: 1. Basic Tool Set Including point, tooth, flat, rondel chisels and hammer: https://www.dickblick.com/products/sculpture-house-stone-sculpture-tool-set/ 2. The Complete Sculptor: retailer of high-quality Italian and American brands of stone carving tools: http://shop.sculpt.com/ 3. Most Sculpture House Chisels may be purchased individually at the school store, or at https://www.dickblick.com/categories/ceramics-sculpture/carving/tools/ Sculpture Shop Access for CE Students Access to the Sculpture Shop for any CE student enrolled in a sculpture course begins on the first day of the scheduled class and ends on the last day of the scheduled class. Like all students, CE students may not use a shop while classes are in session in that area. All students using the shop outside of class time must be able to work independently with the materials and equipment they are using. CE students should feel free to ask the shop manager or shop assistants technical questions about proper use of tools or equipment. Matriculating students will take precedence over CE students when there is any over lapping need for equipment. .