RX-V657 U-Cv.Fm Page 1 Thursday, December 23, 2004 3:10 PM

RX-V657 U-Cv.Fm Page 1 Thursday, December 23, 2004 3:10 PM

01EN_RX-V657_U-cv.fm Page 1 Thursday, December 23, 2004 3:10 PM U RX-V657 RX-V657 AV Receiver © 2005 All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND OWNER’S MANUAL YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Malaysia WE59990 01EN_RX-V657_U.book Page i Thursday, December 30, 2004 12:40 PM IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided CAUTION for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not CAUTION: TO REDUCE THE RISK OF be placed in a built-in installation such as a bookcase or rack ELECTRIC SHOCK, DO NOT REMOVE unless proper ventilation is provided or the manufacturer’s COVER (OR BACK). NO USER-SERVICEABLE instructions have been adhered to. PARTS INSIDE. REFER SERVICING TO 11 Power Sources – This product should be operated only from QUALIFIED SERVICE PERSONNEL. the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For • Explanation of Graphical Symbols products intended to operate from battery power, or other sources, refer to the operating instructions. The lightning flash with arrowhead symbol, within an 12 Grounding or Polarization – This product may be equipped equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within with a polarized alternating current line plug (a plug having the product’s enclosure that may be of sufficient one blade wider than the other). This plug will fit into the magnitude to constitute a risk of electric shock to power outlet only one way. This is a safety feature. If you persons. are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact The exclamation point within an equilateral triangle your electrician to replace your obsolete outlet. Do not is intended to alert you to the presence of important defeat the safety purpose of the polarized plug. operating and maintenance (servicing) instructions in the literature accompanying the appliance. 13 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched 1 Read Instructions – All the safety and operating instructions by items placed upon or against them, paying particular should be read before the product is operated. attention to cords at plugs, convenience receptacles, and the 2 Retain Instructions – The safety and operating instructions point where they exit from the product. should be retained for future reference. 14 Lightning – For added protection for this product during a 3 Heed Warnings – All warnings on the product and in the lightning storm, or when it is left unattended and unused for operating instructions should be adhered to. long periods of time, unplug it from the wall outlet and 4 Follow Instructions – All operating and use instructions disconnect the antenna or cable system. This will prevent should be followed. damage to the product due to lightning and power-line 5 Cleaning – Unplug this product from the wall outlet before surges. cleaning. Do not use liquid cleaners or aerosol cleaners. Use 15 Power Lines – An outside antenna system should not be a damp cloth for cleaning. located in the vicinity of overhead power lines or other 6 Attachments – Do not use attachments not recommended by electric light or power circuits, or where it can fall into such the product manufacturer as they may cause hazards. power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching 7 Water and Moisture – Do not use this product near water – such power lines or circuits as contact with them might be for example, near a bath tub, wash bowl, kitchen sink, or fatal. laundry tub; in a wet basement; or near a swimming pool; and the like. 16 Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result 8 Accessories – Do not place this product on an unstable cart, in a risk of fire or electric shock. stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious 17 Object and Liquid Entry – Never push objects of any kind damage to the product. Use only with a cart, stand, tripod, into this product through openings as they may touch bracket, or table recommended by the manufacturer, or sold dangerous voltage points or short-out parts that could result with the product. Any mounting of the product should in a fire or electric shock. Never spill liquid of any kind on follow the manufacturer’s instructions, and should use a the product. mounting accessory recommended by the manufacturer. 18 Servicing – Do not attempt to service this product yourself 9 A product and cart combination should be moved with care. as opening or removing covers may expose you to Quick stops, excessive force, and uneven dangerous voltage or other hazards. Refer all servicing to surfaces may cause the product and cart qualified service personnel. combination to overturn. 19 Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, i 01EN_RX-V657_U.book Page ii Thursday, December 30, 2004 12:40 PM IMPORTANT SAFETY INSTRUCTIONS d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the antenna that are covered by the operating instructions as an or cable system is grounded so as to provide some improper adjustment of other controls may result in protection against voltage surges and built-up static charges. damage and will often require extensive work by a Article 810 of the National Electrical Code, ANSI/NFPA 70, qualified technician to restore the product to its normal provides information with regard to proper grounding of the operation, mast and supporting structure, grounding of the lead-in wire e) If the product has been dropped or damaged in any to an antenna discharge unit, size of grounding conductors, way, and location of antenna discharge unit, connection to grounding f) When the product exhibits a distinct change in perfor- electrodes, and requirements for the grounding electrode. mance - this indicates a need for service. 20 Replacement Parts – When replacement parts are required, EXAMPLE OF ANTENNA GROUNDING be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other MAST ANTENNA hazards. LEAD IN 21 Safety Check – Upon completion of any service or repairs to WIRE this product, ask the service technician to perform safety GROUND checks to determine that the product is in proper operating CLAMP condition. 22 Wall or Ceiling Mounting – The unit should be mounted ANTENNA DISCHARGE UNIT to a wall or ceiling only as recommended by the (NEC SECTION 810–20) manufacturer. ELECTRIC 23 Heat – The product should be situated away from heat SERVICE EQUIPMENT sources such as radiators, heat registers, stoves, or other GROUNDING CONDUCTORS products (including amplifiers) that produce heat. (NEC SECTION 810–21) GROUND CLAMPS Note to CATV system installer: POWER SERVICE GROUNDING ELECTRODE SYSTEM This reminder is provided to call the CATV system installer’s (NEC ART 250. PART H) attention to Article 820-40 of the NEC that provides NEC – NATIONAL ELECTRICAL CODE guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS Compliance with FCC regulations does not guarantee that UNIT! interference will not occur in all installations. If this This product, when installed as indicated in the product is found to be the source of interference, which instructions contained in this manual, meets FCC can be determined by turning the unit “OFF” and “ON”, requirements. Modifications not expressly approved by please try to eliminate the problem by using one of the Yamaha may void your authority, granted by the FCC, to following measures: use the product. Relocate either this product or the device that is being 2 IMPORTANT: When connecting this product to affected by the interference. accessories and/or another product use only high quality Utilize power outlets that are on different branch (circuit shielded cables. Cable/s supplied with this product MUST breaker or fuse) circuits or install AC line filter/s.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    107 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us