ISO Update Supplement to ISOfocus March 2021 International Standards in process ISO/CD Agricultural machinery — Safety — Part 13: 4254-13 Large rotary mowers An International Standard is the result of an agreement between ISO/CD 5718-1 Harvesting equipment — Requirements for cut- the member bodies of ISO. A first important step towards an Interna- ting elements — Part 1: Blades used on rotary tional Standard takes the form of a committee draft (CD) - this is cir- disc mowers and rotary drum mowers culated for study within an ISO technical committee. When consensus ISO/CD 5718-2 Harvesting equipment — Requirements for cut- has been reached within the technical committee, the document is ting elements — Part 2: Blades used on large sent to the Central Secretariat for processing as a draft International rotary mowers Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently ISO/CD 5231 Extended Farm Management Information Sys- carried out on a final draft International Standard (FDIS), the approval tems Data Interface (EFDI) criteria remaining the same. TC 31 Tyres, rims and valves ISO/CD 4250-1 Earth-mover tyres and rims — Part 1: Tyre designation and dimensions ISO/CD 4250-2 Earth-mover tyres and rims — Part 2: Loads and inflation pressures TC 34 Food products ISO/CD 17715 Flour from wheat (Triticum aestivum L.) — Amperometric method for starch damage CD registered measurement ISO/CD 24557 Pulses — Determination of moisture content — Air-oven method Period from 01 February to 01 March 2021 TC 35 Paints and varnishes These documents are currently under consideration in the technical committee. ISO/DTR 5602 Sources of error when using electrochemical impedance spectroscopy for the evaluation of They have been registred at the Central Secretariat. coatings and coating materials ISO/CD 16925 Paints and varnishes — Determination of the TC 4 Rolling bearings resistance of coatings to pressure water-jetting ISO/CD Spherical plain bearings — Part 6: Spheri- ISO/CD Paints and varnishes — Electro-deposition 12240-6 cal plain bearings rod ends for hydraulic fluid 22553-10 coatings — Part 10: Method for the determina- power cylinders tion of the edge protection on punched and lasered edges and holes TC 10 Technical product documentation TC 38 Textiles ISO/CD 24096 Technical product documentation (TPD) — Classification of requirements and ISO/CD 18782 Textiles — Determination of dynamic hygro- specifications scopic heat generation ISO/CD 6284 Construction drawings — Indication of limit TC 42 Photography deviations ISO/DTS Graphic technology and photography — TC 20 Aircraft and space vehicles 17321-4 Colour characterization of digital still cameras (DSCs) — Part 4: Programmable light emission ISO/CD 23135 Space systems — Verification program and system management process TC 45 Rubber and rubber products ISO/CD 24356 General requirements for tethered unmanned aircraft system ISO/CD 5260 Epoxidized natural rubber — Determination of epoxidation and ring opening level by NMR TC 22 Road vehicles spectrometry ISO/CD 6622-2 Internal combustion engines — Piston rings — ISO/DTS Reclaimed rubber derived from products Part 2: Rectangular rings made of steel 16095 containing mainly natural rubber — Evaluation ISO/DTR Road vehicles — Injury risk curves for the procedure 19222 THOR dummy ISO/DTS Reclaimed isobutene-isoprene (IIR) rubber — ISO/CD 5474-1 Electrically propelled road vehicles — Func- 16096 Evaluation procedure tional requirements and safety requirements for TC 61 Plastics power transfer — Part 1: General ISO/DTR 4763 Plastics — Environmental aspects — Analysis ISO/CD 5474-2 Electrically propelled road vehicles — Func- of relevant terms used in the sector and need tional requirements and safety requirements for for standardization power transfer — Part 2: AC power transfer ISO/CD 5474-3 Electrically propelled road vehicles — Func- TC 70 Internal combustion engines tional requirements and safety requirements for ISO/CD Reciprocating internal combustion engines power transfer — Part 3: DC power transfer 7967-10 — Vocabulary of components and systems — ISO/CD 11154 Road vehicles — Roof load carriers Part 10: Ignition systems TC 23 Tractors and machinery for agriculture ISO/CD Reciprocating internal combustion engines 7967-12 — Vocabulary of components and systems — and forestry Part 12: Exhaust emission control systems ISO/CD 3991 Agricultural machinery — Robotic feed sys- TC 79 Light metals and their alloys tems — Safety ISO Update, Supplement to ISO Focus -- March 2021 1 ISO/CD 4155.2 Magnesium and magnesium alloys — Determi- ISO/DTS Polyethylene pipes and fittings for the supply of nation of nickel — Inductively coupled plasma 10839 gaseous fuels — Code of practice for design, optical emission spectrometric method handling and installation ISO/CD 4177 Magnesium and magnesium alloys — Deter- TC 145 Graphical symbols mination of chromium — Inductively coupled ISO/CD Safety information for the content of piping plasma atomic emission spectrometry 20560-2 systems and tanks — Part 2: Tanks ISO/CD 4181.2 Magnesium and magnesium alloys —Deter- mination of strontium — Inductively coupled TC 149 Cycles plasma optical emission spectrometric method ISO/CD 6742-1 Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices ISO/CD 4188.2 Magnesium and magnesium alloys – Determi- nation of arsenic – Inductively coupled plasma ISO/CD 6742-2 Cycles — Lighting and retro-reflective devices optical emission spectrometric method — Part 2: Retro-reflective devices TC 83 Sports and other recreational facilities ISO/CD 6742-3 Cycles — Lighting and retro-reflective devices and equipment — Part 3: Installation and use of lighting and retro-reflective devices ISO/DIS 23659 Sports and recreational facilities — Trampoline parks — Safety requirements ISO/CD 6742-4 Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the TC 85 Nuclear energy, nuclear technologies, cycle's movement and radiological protection ISO/CD 6742-5 Cycles — Lighting and retro-reflective devices ISO/CD 9271 Decontamination of radioactively contaminated — Part 5: Lighting systems not powered by the surfaces — Testing of decontamination agents cycle's movement for textiles TC 159 Ergonomics ISO/CD 20044 Measurement of radioactivity in the environ- ment — Air: Aerosols - Test method using ISO/DTR Human performance in physical environments sampling by filter media. 23454-1 — Part 1: A performance framework ISO/CD 20045 Measurement of radioactivity in the environ- TC 163 Thermal performance and energy use ment — Air: tritium — Test method using in the built environment sampling by bubbler ISO/CD 24285 Thermal insulation for building equipment and ISO/DTR Development of a water equivalent phantom industrial applications — Cellular Glass prod- 24422 for the measurement of physical characteristics ucts — Specification of specific models of radiosurgery treatment TC 164 Mechanical testing of metals device ISO/DTR Metallic materials — Fatigue testing — General TC 91 Surface active agents 12105 principles ISO/DTS Surface active agents — Bio-based surfactants ISO/DTS Temperature verification method applied to 21680.2 — Requirements and test methods 21913 dynamic fatigue testing TC 92 Fire safety TC 184 Automation systems and integration ISO/DTS Fire tests — method for evaluating the potential ISO/CD Industrial automation systems and integration 19850 use of LED (light emitting diode) as alternative 14649-2 — Physical device control — Data model for to white light for measuring the smoke density computerized numerical controllers — Part 2: and smoke production rate in fire test General process data TC 105 Steel wire ropes ISO/CD Industrial automation systems and integration ISO/CD 4344 Steel wire ropes for lifts — Minimum 14649-3 — Physical device control — Data model for requirements computerized numerical controllers — Part 3: Manufacturing features TC 118 Compressors and pneumatic tools, machines and equipment ISO/CD Industrial automation systems and integration 14649-4 — Physical device control — Data model for ISO/CD Hand-held non-electric power tools — Safety computerized numerical controllers — Part 4: 11148-13 requirements — Part 13: Fastener driving tools Process data for cutting TC 126 Tobacco and tobacco products ISO/CD Industrial automation systems and integration ISO/CD 24211 Vapour products — Determination of selected 14649-5 — Physical device control — Data model for carbonyls in vapour product emissions computerized numerical controllers — Part 5: Tools for cutting operations TC 135 Non-destructive testing ISO/CD 8000-1 Data quality — Part 1: Overview ISO/CD 24543 Non-destructive testing - Acoustic emission testing - Verification of the receiving sensitiv- TC 190 Soil quality ity spectra of piezoelectric acoustic emission ISO/CD Soil quality — Effects of pollutants on earth- sensors 11268-2 worms — Part 2: Determination of effects on TC 136 Furniture reproduction of Eisenia fetida/Eisenia andrei ISO/CD 19682 Furniture — Tables — Test methods for the de- TC 199 Safety of machinery termination of stability, strength and durability ISO/CD 13855 Safety of machinery — Positioning of safe- TC 138 Plastics pipes, fittings and valves for guards with respect to the approach of the human body the transport of fluids TC 204 Intelligent transport systems ISO/DTS Polyethylene reinforced with short glass fibres 22101-1.3 (PE-sGF) piping systems for industrial applica-
Details
-
File Typepdf
-
Upload Time-
-
Content LanguagesEnglish
-
Upload UserAnonymous/Not logged-in
-
File Pages23 Page
-
File Size-