Silver Peak Command Line Interface Reference Guide Release 3.3 October 2010 PN 200063-001 Rev I Silver Peak NX Series Command Line Interface Reference Guide Silver Peak NX Series Command Line Interface Reference Guide PN 200063-001 Rev I Date: October 2010 Copyright © 2005–2010 Silver Peak Systems, Inc. All rights reserved. Information in this document is subject to change at any time. Use of this documentation is restricted as specified in the End User License Agreement. No part of this documentation can be reproduced, except as noted in the End User License Agreement, in whole or in part, without the written consent of Silver Peak Systems, Inc. Trademark Notification Silver Peak SystemsTM, the Silver Peak logo, Network MemoryTM, and Silver Peak NX-SeriesTM are trademarks of Silver Peak Systems, Inc. All trademark rights reserved. All other brand or product names are trademarks or registered trademarks of the respective companies or organizations. Warranties and Disclaimers THIS DOCUMENTATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SILVER PEAK SYSTEMS, INC. ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS IN THIS DOCUMENTATION OR OTHER DOCUMENTS WHICH ARE REFERENCED BY OR LINKED TO THIS DOCUMENTATION. REFERENCES TO CORPORATIONS, THEIR SERVICES AND PRODUCTS, ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. IN NO EVENT SHALL SILVER PEAK SYSTEMS, INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS DOCUMENTATION. THIS DOCUMENTATION MAY INCLUDE TECHNICAL OR OTHER INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN; THESE CHANGES WILL BE INCORPORATED IN NEW EDITIONS OF THE DOCUMENTATION. SILVER PEAK SYSTEMS, INC. MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED IN THIS DOCUMENTATION AT ANY TIME. Silver Peak Systems, Inc. 4500 Great America Parkway, Suite 100 Santa Clara, CA 95054 1.877.210.7325 (toll-free in USA) +1.408.935.1850 www.silver-peak.com/support [email protected] ii PN 200063-001 Rev I Contents Preface . ix Introduction . ix Audience . ix Structure of the Manual . ix Conventions Used in this Manual . x Typographical Conventions. x Syntax Notation . x Annotated Symbols . xi Related Documents . xi Technical Support . xii Chapter 1 Using the Command-Line Interface . 1 Understanding the CLI Structure . 1 CLI Modes . 1 User Privilege Levels. 3 User Names. 4 Passwords. 4 Object Names . 4 Understanding the Command Structure . 4 Understanding the Command Syntax . 5 Syntax Helper . 5 Command History . 5 Using the Command Line-Editing Keys . 6 Chapter 2 Administration Commands . 7 aaa authentication login default . 8 aaa authorization map . 9 arp . 11 boot system . 12 clear . 13 cli . 15 configuration . 17 email . 20 email send-test . 22 file debug-dump . 23 file job upload. 25 file stats . 26 file tcpdump . 27 file upload cancel . 28 help . 29 image boot . 30 image install. 31 image upgrade. 32 job . 33 job execute . 35 license . 36 radius-server . 37 reboot. 39 reload. 40 system disk . 41 tacacs-server . ..