PUB ISO 2016-12.Pdf

PUB ISO 2016-12.Pdf

Standards published New International Standards published between 01 December and 31 December 2016 * Available in English only ** French version of standard previously published in English only Price group PC 252 Natural gas fuelling stations for vehicles ISO 16923:2016 * Natural gas fuelling stations — CNG stations for fuelling vehicles F ISO 16924:2016 * Natural gas fuelling stations — LNG stations for fuelling vehicles G TC 6 Paper, board and pulps ISO 12625-4:2016 Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maxi- mum force and tensile energy absorption B ISO 12625-5:2016 Tissue paper and tissue products — Part 5: Determination of wet tensile strength C ISO 12625-6:2016 Tissue paper and tissue products — Part 6: Determination of grammage B TC 8 Ships and marine technology ISO 19355:2016 * Ships and marine technology — Marine cranes — Structural requirements B TC 17 Steel ISO 18203:2016 Steel — Determination of the thickness of surface-hardened layers B TC 20 Aircraft and space vehicles ISO 7718-1:2016 * Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 1: Main deck doors A ISO 7718-2:2016 * Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors A TC 22 Road vehicles ISO 11898-2:2016 * Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit E ISO 17987-7:2016 * Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conformance test specification H ISO 13296:2016 * Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions B ISO 13948-2:2016 * Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections B IEC 62752:2016 * In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) H TC 24 Particle characterization including sieving ISO 19430:2016 * Particle size analysis — Particle tracking analysis (PTA) method D TC 27 Solid mineral fuels ISO 1213-2:2016 * Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis A TC 29 Small tools ISO 1085:2016 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing A ISO 3318:2016 Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads A TC 31 Tyres, rims and valves ISO 5775-2:2015 Bicycle tyres and rims — Part 2: Rims C TC 34 Food products ISO 16649-3:2015 Microbiology of the food chain — Horizontal method for the enumeration of beta-glucuronidase- positive Escherichia coli — Part 3: Detection and most probable number technique using 5- B bromo-4-chloro-3-indolyl-ß-D-glucuronide ISO 5492:2008/Amd * Sensory analysis — Vocabulary — Amendment 1 1:2016 A ISO/TS 21569-4:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 4: Real-time PCR based screening B methods for the detection of the P-nos and P-nos-nptII DNA sequences ISO/TS 21569-5:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening B method for the detection of the FMV promoter (P-FMV) DNA sequence ISO/TS 21569-6:2016 Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 6: Real-time PCR based screening B methods for the detection of cry1Ab/Ac and Pubi-cry DNA sequences TC 37 Terminology and other language and content resources ISO 24617-8:2016 * Language resource management — Semantic annotation framework (SemAF) — Part 8: Se- mantic relations in discourse, core annotation schema (DR-core) F ISO 2603:2016 Simultaneous interpreting — Permanent booths — Requirements B ISO 4043:2016 Simultaneous interpreting — Mobile booths — Requirements B ISO 20109:2016 Simultaneous interpreting — Equipment — Requirements C TC 38 Textiles ISO 16847:2016 Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing A TC 39 Machine tools ISO 3070-2:2016 Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type) G TC 44 Welding and allied processes ISO 10675-1:2016 Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys B TC 45 Rubber and rubber products ISO 8033:2016 Rubber and plastics hoses — Determination of adhesion between components C ISO 13775-2:2016 * Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applica- tions D TC 58 Gas cylinders ISO 12209:2013/Amd Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — 1:2016 Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar XZ TC 59 Buildings and civil engineering works ISO 29481-2:2012 Building information models — Information delivery manual — Part 2: Interaction framework G TC 61 Plastics ISO 16620-4:2016 Plastics — Biobased content — Part 4: Determination of biobased mass content C ISO 177:2016 Plastics — Determination of migration of plasticizers A TC 69 Applications of statistical methods ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality H characteristic and a single AQL ISO 3951-2:2013 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independ- H ent quality characteristics TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO 22765:2016 * Nuclear fuel technology — Sintered (U,Pu)O2 pellets — Guidance for ceramographic prepara- tion for microstructure examination B TC 89 Wood-based panels ISO 27769:2016 * Wood-based panels — Wet process fibreboard C TC 92 Fire safety ISO/TS 5660-4:2016 * Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Meas- urement of low levels of heat release E TC 94 Personal safety -- Protective clothing and equipment ISO 17493:2016 Clothing and equipment for protection against heat — Test method for convective heat re- sistance using a hot air circulating oven B TC 106 Dentistry ISO/TS 20746:2016 * Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method B TC 108 Mechanical vibration, shock and condition monitoring ISO 20283-5:2016 Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measure- ment, evaluation and reporting of vibration with regard to habitability on passenger and mer- B chant ships ISO 15261:2004/Amd * Vibration and shock generating systems — Vocabulary — Amendment 1 1:2016 A TC 113 Hydrometry ISO/TR 19234:2016 * Hydrometry — Low cost baffle solution to aid fish passage at triangular profile weirs that con- form to ISO 4360 C TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 15493:2003/Amd Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), 1:2016 unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Spec- XZ ifications for components and the system — Metric series — Amendment 1 ISO 10928:2016 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use F TC 145 Graphical symbols ISO 3864-2:2016 * Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels D TC 147 Water quality ISO 9308-1:2014/Amd * Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane 1:2016 filtration method for waters with low bacterial background flora — Amendment 1 XZ TC 153 Valves ISO 6553:2016 Automatic steam traps — Marking A TC 176 Quality management and quality assurance ISO/TS 9002:2016 Quality management systems — Guidelines for the application of ISO 9001:2015 F TC 178 Lifts, escalators and moving walks ISO/TR 8100-24:2016 * Safety requirements for lifts (elevators) — Part 24: Convergence of lift requirements H TC 184 Automation systems and integration IEC 62264-3:2016 * Enterprise-control system integration — Part 3: Activity models of manufacturing operations management B TC 194 Biological and clinical evaluation of medical devices ISO/TR 15499:2016 Biological evaluation of medical devices — Guidance on the conduct of biological evaluation within a risk management process C TC 204 Intelligent transport systems ISO/TS 21219-23:2016 * Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 23: Roads and multimodal routes (TPEG2-RMR) F TC 206 Fine ceramics ISO 14705:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature D TC 210 Quality management and corresponding general aspects for medical devices ISO 15223-1:2016 Medical devices — Symbols

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    16 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us