NAOSITE: Nagasaki University's Academic Output SITE Title Two element phased array dipole antenna on finite EBG ground plane Author(s) Taguchi, Mitsuo; Tanaka, Shinya Proc. of 23th Annual Review of Progress in Applied Computational Citation Electromagnetics, Verona, pp. 521-524; March 2007. Issue Date 2007-05 URL http://hdl.handle.net/10069/21535 Right (c) 2007 ACES This document is downloaded at: 2020-09-17T22:19:01Z http://naosite.lb.nagasaki-u.ac.jp 23rd Annual Review of Progress in Applied Computational Electromagnetics March 19-23, 2007 - Verona, Italy ©2007 ACES Two Element Phased Array Dipole Antenna on Finite EBG Ground Plane Mitsuo Taguchi, Shinya Tanaka, and Kazumasa Tanaka 1, 3 Department of Electrical & Electronic Engineering Nagasaki University, 1-14 Bunkyo-machi, Nagasaki-shi, 852-8521 JAPAN 1 [email protected], 3 [email protected] 2 Graduate School of Science and Technology, Nagasaki University, 1-14 Bunkyo-machi, Nagasaki-shi, 852-8521 JAPAN [email protected] Abstract: Two element phased array dipole antenna backed by finite EBG ground plane is proposed for the directional antenna. Two dipole element is fed with 90 degree phase difference. In the numerical analysis, the electromagnetic simulator WIPL-D based on the Method of Moment is used. The size of EBG ground plane is fixed to one wavelength by one wavelength at the design frequency of 2.45 GHz. The relation between the front-to-back ratio and the parameters of EBG ground plane is discussed. The maximum front-to-back ratio of 24 dB is obtained. Keywords: phased array antenna, EBG, directional antenna, front-to-back ratio, WIPL-D 1. Introduction For the short-range wireless communication, a small antenna with unidirectional radiation characteristics is desired. As the directional antenna composed of wire elements, the Yagi-Uda antenna and the electronically steerable passive array radiators (ESPAR) antenna are well known. These antennas consist of single driven element and some parasitic elements. In the Yagi-Uda antenna, the induced currents on the parasitic elements are controlled by adjusting the length of parasitic elements and the distance of elements [1]. In the ESPAR antenna, the current of parasitic elements are controlled by adjusting the loaded reactance at the feed point of them [2]. These antennas are spatially phase controlled antennas. Authors have proposed the two element array dipole antenna with 90° phase difference feed for the directional antenna [3]. By adjusting the length of each element and the distance between the two elements, the front-to-back ratio of 15.3 dB have been obtained at the design frequency of 2.45 GHz. In this paper, this antenna is located on the electromagnetic bandgap (EBG) ground plane with finite size and numerically analyzed by using the electromagnetic simulator WIPL-D based on the Method of Moment [4], [5]. 2. Analytical Model Fig. 1 shows the structure of the two element phased array dipole antenna on the EBG ground plane. Each antenna element is fed with 90° phase difference. The distance between two elements is d = 20.6 mm. The length of two elements are L1 = 54.6 mm and L2 = 50.2 mm. The radius of each element is 1 mm. When this array antenna is located in free space, the front-to-back ratio 15.3 dB is obtained at the design frequency 2.45 521 23rd Annual Review of Progress in Applied Computational Electromagnetics March 19-23, 2007 - Verona, Italy ©2007 ACES GHz. This antenna is located h2= 3mm above the EBG ground plane with length 1λc by 1λc. λc is the wavelength at the design frequency 2.45 GHz. The relative permittivity of EBG material is 2.6 and its thickness is 4 mm. In the numerical analysis by WIPL-D, antenna elements are excited by the delta-gap generators and the thickness of EBG patches are assumed infinitely thin. 3. Results and Discussion Fig. 2 shows the calculated front-to-back ratio for different number of EBG patches. The gap width is fixed to be g = 3 mm. Figs. 3 and 4 show the front-to-back ratio for 10 by 10 and 9 by 9 EBG patches, respectively. In Fig. 3, the front-to-back ratio of the two dipole array backed by the perfect electric conductor (PEC) is also shown for comparison. In the case of 10 by 10 EBG patches, the maximum front-to-back ratio of 24 dB is obtained at the frequency of 2 GHz. z L2 #2 d L1 #1 x Patches g h2 h1 y Substrate Ground Plane W y z Pin (a) Perspective view. (b) Cross sectional view. Fig. 1. Structure of two element phased array dipole antenna on EBG substrate. d = 20.6 mm, L1 = 54.6 mm, L2 = 50.2 mm, radius of dipole elements = 1 mm, h2 = 3 mm, relative permittivity of substrate = 2.6, h1= 4 mm. 25 25 6 x 6 (W=17.8mm) 9 x 9 (W=11.3mm) 20 20 15 15 10 10 x 10 (W=9.5mm) 10 FB ratio [dB] FB ratio [dB] 5 5 7 x 7 (W=15mm) 8 x 8 (W=12.75mm) 0 0 2 2.2 2.4 2.6 2.8 3 2 2.2 2.4 2.6 2.8 3 Frequency [GHz] Frequency [GHz] Fig. 2. Front-to-back ratio for different number of EBG patches, g = 3 mm. 522 23rd Annual Review of Progress in Applied Computational Electromagnetics March 19-23, 2007 - Verona, Italy ©2007 ACES 25 25 g=1.83mm, W=10.7mm g =3mm, W=11.3mm 20 20 15 15 10 PEC 10 g=1.83mm, g =3mm, W=9.5mm FB ratio ratio [dB] FB FB ratio [dB] W=12.44mm 5 5 g=0.61mm, W=12mm g=0.61mm, W=13.66mm 0 0 2 2.2 2.4 2.6 2.8 3 2 2.2 2.4 2.6 2.8 3 Frequency [GHz] Frequency [GHz] Fig. 3. Front-to-back ratio for 10 by 10 EBG patches. Fig. 4. Front-to-back ratio for 9 by 9 EBG patches. Fig. 5 shows the electric field distribution in the vicinity of EBG ground plane of 10 by 10 patches at the frequency of 2 GHz. Fig. 6 shows the electric field distribution in the vicinity of PEC ground plane for comparison. In the case of the EBG ground plane, the electric field concentrates in the vicinity of gap between EBG patches. The electric field becomes weak near edge of EBG ground plane compared with the case of PEC plane. Therefore the backward radiation becomes small in the case of EBG ground plane. 4. Conclusion Two element array dipole antenna with 90° phase difference feed on the finite EBG ground plane has been analyzed numerically. Although the parameters of two elements and EBG ground plane have not been optimized, the front-to-back ratio of 24 dB is obtained. Since the maximum front-to-back ratio of two element phased array dipole antenna located in free space is 15.3 dB, the front-to-back ratio is improved. By adjusting these parameters, higher front-to-back ratio will be obtained. This antenna will be promising as an element antenna for the base station antenna of short-range wireless communication system. References [1] H. Yagi, “Beam transmission of ultra-short waves,” Proc. of IRE, vol. 16, p. 715, 1928. [2] T. Ohira and K. Gyoda, “Electronically steerable passive array radiator antennas for low-cost analog adaptive beam-forming,” Proc. of IEEE International Conference on Phased Array Systems and Technology, pp. 101-104, May 2000. [3] M. Taguchi, K. Era and K. Tanaka: "Two element phased array dipole antenna", Proc. of 22th Annual Review of Progress in Applied Computational Electromagnetics, Miami, 15-5, March 2006. [4] F. Yang, Y. Rahmat-Samii: “Reflection phase characteristics of the EBG Ground plane for low profile wire antenna applications”, IEEE Trans. on Antennas and Propagation, vol. 51, no. 10, pp. 2691-2703, Oct. 2003. [5] “WIPL-D Pro v6.1 User’s Manual”, WIPL Ltd., 2006. 523 23rd Annual Review of Progress in Applied Computational Electromagnetics March 19-23, 2007 - Verona, Italy ©2007 ACES [μV/m] [μV/m] (a) x component (a) x component [mV/m] [μV/m] (b) y component (b) y component [V/m] (c) z component [kV/m] (c) z component Fig. 5. Electric field distribution in vicinity of EBG Fig. 6. Electric field distribution in vicinity of ground plane. Number of patches 10 by 10, PEC ground plane. Frequency = 2 GHz, g = 3 mm, W = 9.5 mm, frequency = 2 GHz, FB ratio = 15 dB. FB ratio = 24 dB. 524.