Little Katie Designed by Debbie Beaves using fabric by Bird Brain Designs Rectangle finished size approx. 32-1/2” x 38-1/2” Square finished size approx. 26” x 26” PORTLAND 6000 N. Cutter Cir. LOS ANGELES 4561 Maywood Ave 800.433.0722 Portland, OR 97217 800.237.6620 Vernon, CA 90058 503.284.4124 fax 503.288.4475 323.584.8820 fax 323.584.8847 www.eeschenck.com Little Katie Square Quilt Quilt Size: 26” x 26” Scottie Dog Cutting: 1. Following the manufacturer’s instructions, Cutting: trace 4 of each template onto the paper Fabric 1- FWDQUG05-WT side of the fusible web. Roughly cut out Cut (1) 7” square. each template about 1/8” outside the drawn lines. Fabric 2- FWDQUG08-W 2. Press each template onto the wrong side of Cut (1) 7” square. the fabrics as listed to the left. Cut out each template on the drawn lines. Fabric 3- FWDQUG11-NT Cut (1) 7” square. Square Quilt Block Assembly: 3. Refer to the Figure 1 for fabric placement to Fabric 4- FWDQUG03-J match up one dog to one 7” background Cut (1) 2-1/2” width of fabric (WOF) strip. square. Press one dog and one bow to the See instructions to cut (1) dog. center of each background square. Fabric 5- FWDQUG04-J Cut (1) 2-1/2” x 18” strip. Cut (2) 3-1/2” x 20-1/2” strips. Cut (2) 3-1/2” x 26-1/2” strips. Fabric 6- FWDQUG09-J Cut (1) 2-1/2” x WOF strip See instructions to cut (1) dogs. Fabric 7- FWDQUG10-J2 Cut (3) 2-1/2” x 18” strips. Cut (4) 2-1/2” squares 4. Finish the raw edges of each shape with a Cut enough 3” wide bias binding strips to decorative stitch such as a buttonhole or equal at least 116”. satin stitch to complete the (4) appliquéed See instructions to cut (1) dogs. blocks. Trim the blocks to measure 6-1/2” square. Fabric 8- FWDQUG11-JN 5. Follow Figure 1 to sew the (4) appliquéed Cut (1) 2-1/2” x WOF strip. blocks together in (2) rows of (2) blocks See instructions to cut (1) dogs. each to make the quilt center. Fabric 9- FWDQUG08-R See instructions to cut (4) bows. Fabric 10- FWDQUG10-J Cut (2) 1-1/2” x 12-1/2” strips. Cut (2) 1-1/2” x 14-1/2” strips. Fabric 11-FWDQUG11-NJ Cut (1) 7” square. Cut (2) 1-1/2” x 18-1/2” strips. Cut (2) 1-1/2” x 20-1/2” strips. Backing Cut (1) 34” x 34” strip for the backing. Square Quilt Assembly Follow the quilt layout diagram while 6. Sew (1) 1-1/2” x 12-1/2” Fabric 10 strip to assembling the quilt top: each side of the quilt top. Sew (1) 1-1/2” 9. Sew one border to the left side of the quilt x 14-1/2” Fabric 10 strip to the top and top, aligning the Fabric 6 square with the bottom of the quilt top. upper left corner. Sew one border to the 7. Follow Figure 2 for fabric placement to sew right side of the quilt top, aligning the Fabric together 6 square to the lower right corner. (3) 2-1/2” x 18” Fabric 7 strips, 10. Sew one 2-1/2” Fabric 7 square to each (1) 2-1/2” x WOF Fabric 8 strip, end of the remaining two borders. Follow (1) 2-1/2” x WOF Fabric 4 strip, the quilt layout to sew the borders to the (1) 2-1/2” x 18” Fabric 5 strip quilt top. (1) 2-1/2” x WOF Fabric 6 strip 11. Sew (1) 1-1/2” x 18-1/2” Fabric 11 strip to to make (1) strip set. each side of the quilt top. Sew (1) 1-1/2” x 20-1/2” Fabric 11 strip to the top and bottom of the quilt top. 12. Sew (1) 3-1/2” x 20-1/2” Fabric 5 strip to each side of the quilt top. Sew (1) 3-1/2” x 26-1/2” Fabric 5 strip to the top and bottom of the quilt top. 13. Layer and quilt as desired. 14. Sew the 3” Fabric 7 bias binding strips together, end-to-end with 45º seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press. 15. Bind as desired. 16. Sew the four buttons onto the bows. 8. Sub-cut the strip set into (4) 2-1/2” x 14-1/2” border strips (Fig. 3). Little Katie Rectangle Quilt Quilt Size: 32-1/2” x 38-1/2” Scottie Dog Cutting 1. Following the manufacturer’s instructions, Cutting: trace 12 of each template onto the paper Fabric 1- FWDQUG05-WT side of the fusible web. Roughly cut out Cut (3) 7” squares. each template about 1/8” outside the Fabric 2- FWDQUG08-W drawn lines. Cut (3) 7” squares. 2. Press each template onto the wrong side of the fabrics as listed on the templates. Cut Fabric 3- FWDQUG11-NT out each template on the drawn lines. Cut (3) 7” squares. Rectangle Block Assembly: Fabric 4- FWDQUG03-J 3. Refer to the Figure 1 for fabric placement to Cut (4) 2-1/2” squares. See instructions to cut (1) dog. match up one dog to one 7” background square. Press one dog and one bow to the Fabric 5- FWDQUG04-J center of each background square. Cut (5) 2-1/2” squares. Cut (4) 3-1/2” x 32-1/2” strips. See instructions to cut (2) dogs. Fabric 6- FWDQUG09-J Cut (4) 2-1/2” squares. See instructions to cut (2) dogs. Fabric 7- FWDQUG10-J2 Cut (15) 2-1/2” squares. Cut enough 3” wide bias binding strips to equal at least 152”. See instructions to cut (2) dogs. Fabric 8- FWDQUG11-JN Cut (6) 2-1/2” squares. See instructions to cut (2) dogs. Fabric 9- FWDQUG08-R See instructions to cut (12) bows. Fabric 10- FWDQUG10-J Cut (10) 2-1/2” squares. See instructions to cut (1) dog. 4. Finish the raw edges of each shape with a Fabric 11-FWDQUG11-NJ decorative stitch such as a buttonhole or Cut (3) 7” squares. Cut (2) 1-1/2” x 30-1/2” strips. satin stitch to complete the (12) appliquéed Cut (2) 1-1/2” x 26-1/2” strips. blocks. Trim the blocks to measure 6-1/2” square. Fabric 12- FWDQUG08-T 5. Follow Figure 1 and sew the (12) appliquéed Cut (2) 1-1/2” x 24-1/2” strips. blocks together in (4) rows of (3) blocks each Cut (2) 1-1/2” x 20-1/2” strips. to make the quilt center. Fabric 13- FWDQUG05-JT Cut (6) 2-1/2” squares. See instructions to cut (2) dogs. Backing Cut (1) 40” x 44” strip for the backing. Rectangle Quilt Assembly 9. Sew (1) 1-1/2” x 30-1/2” Fabric 11 strip to Follow the quilt layout diagram while each side of the quilt top. Sew (1) 1-1/2” x assembling the quilt top: 26-1/2” Fabric 11 to the top and bottom of 6. Sew (1) 1-1/2” x 24-1/2” Fabric 12 strip to the quilt top. each side of the quilt top. Sew (1) 1-1/2” x 10. Sew (1) 3-1/2” x 32-1/2” Fabric 5 strip to each 20-1/2” Fabric 12 strip to the top and bottom side of the quilt top. Sew (1) 3-1/2” x 34-1/2” of the quilt top. Fabric 5 strip to the top and bottom of the 7. Refer to the quilt layout or arrange as quilt top. desired (13) 2-1/2” assorted squares. Sew the 11. Layer and quilt as desired. squares together to make (1) side border. 12. Sew the 3” Fabric 7 bias binding strips Repeat to make a second side border. Sew together, end-to-end with 45º seams, to the borders to each side of the quilt top. make the binding. Fold this long strip in half 8. Refer to the quilt layout or arrange as lengthwise with wrong sides together and desired (12) 2-1/2” assorted squares. Sew the press. squares together to make the top border. 13. Bind as desired. Repeat to make the bottom border. Sew 14. Sew the (12) buttons onto the bows. the strips to the top and bottom of the quilt top. Templates Completed Scottie Dog. Use for appliqué placement on the base squares. 1” square box Use to be sure templates are the correct scale. Fabric Square Quilt Yardage: Rectangle Quilt Yardage: Fabric 1 .... Fat 1/4 Fabric 1 .... 1/4 yd FWDQUG05-WT FWDQUG05-WT Fabric 2 .... Fat 1/4 Fabric 2 .... 1/4 yd FWDQUG08-W FWDQUG08-W Fabric 3 .... Fat 1/4 Fabric 3 .... 1/4 yd FWDQUG11-NT FWDQUG11-NT Fabric 4 .... Fat 1/4 Fabric 4 .... 1/4 yd FWDQUG03-J FWDQUG03-J Fabric 5 .... 2/3 yd Fabric 5 .... 3/4 yd FWDQUG04-J FWDQUG04-J Fabric 6 .... Fat 1/4 Fabric 6 .... 1/4 yd FWDQUG09-J FWDQUG09-J Fabric 7 .... 1 yd * Fabric 7 .... 1-1/8 yds * FWDQUG10-J2 FWDQUG10-J2 Fabric 8 .... Fat 1/4 Fabric 8 .... 1/4 yd FWDQUG11-JN FWDQUG11-JN Fabric 9 .... 1/8 yd Fabric 9 ...