HOLE BORING TOOLS FEATURES / ADVANTAGES / BENEFITS CARBIDE TIPPED HOLE CUTTERS • Precision ground tooth • Smooth cutting action • Burr free hole • Step-Center Pilot Bit • Reduces “break through” impact • Longer cutting life CTS STYLE • Grooved gullet • Directs chip away from cut • Faster cutting • Cuts Sheet metal, stainless steel, pipe, aluminum, PVC / ABS, plastic • Two cutting depths 3/16" for sheet metal applications CTD 1" for pipe/conduit applications STYLE STEP DRILLS – HSS & TiN COATED • Trailing flute • Automatically deburs holes • Less secondary work saves time ESD • Three flats on shank • Securely fastens in power drill • Increased accuracy when drilling • New split point tip for self start holes • More chip clearance, less resistance • Faster penetration • TiN coating available • Reduces friction • Increases drill life • Cuts steel, copper, brass, aluminum, plexiglass, and other thin materials • 11 sizes, self starting & hole enlarging SPADE BITS • Angled spur • Scribes hole before chip is made • Cleaner hole with less vibration WSB • Wire pulling hole • Uses bit to pull lead wire back • Saves time through drilled hole • 1/4" quick change stem • Works with 1/4" Fast-Adapt™ MQC14 • Fits all drills, quick tool changes • Cuts wood and wood composites • Sizes from 1/4" to 1-1/2" • Total of 17 diameters available • 6" length DOUBLE CUT AUGER BITS • Screw tip • Self feeds into cut • Easy starting WSAB • Double flutes • Fast chip removal • Speeds cutting • Re-sharpenable edges • Maintain sharp edge/extend bit life • Less downtime and saves money • Cuts wood and nail-embedded wood • Lengths available: 7-1/2" and 18" • Deep boring or work between studs • Diameters range from 3/8" to 1-1/2" • Total of 28 bit sizes available SELF-FEED WOOD BITS • Precision hardened cutting edge • Clean smooth holes • Accurate and consistent hole size WSF • Single chip lift design • Efficient chip removal • Fast cutting • Aggressive self-feed screw • Pulls bit through cut • Accuracy of cut and ease of use • Quick change 7/16" hex shank • Fast bit changes • Re-sharpenable cutting edges • Shanks have milled flats • Secure gripping by drill chuck • Re-sharpenable cutting edges • Fresh cutting edges multiple times • Cuts wood, wood composites, plastic • Hole boring in PVC & plastic conduit MKMORSE.COM P.O. BOX 8677 | CANTON, OH 44711-8677 USA | 1101 11TH ST. SE | CANTON, OH 44707 PHONE: 800-733-3377 | INTERNATIONAL PHONE: 001-330-453-8187 YEARS FAX: 800-729-1112 | INTERNATIONAL FAX: 330-453-9379 | E-MAIL: [email protected] 1963-2013 HBLIT 08/2014.