Industry Standard ISCA-101-L/R Single Horizontal Tag: Adjustable Closet Carrier SPECIFICATION: Watts Drainage Products ISCA-101-L/R Industry Standard single horizontal adjustable water closet carrier with epoxy coated cast iron fitting, 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy coated cast iron patent pending compression seal faceplate assembly, epoxy coated cast iron foot supports adjustable for standard and wheelchair height, adjustable ABS nipple with integral test cap and neoprene bowl gasket, plated hardware and chrome cap nuts. Options (Select One or More) 1010 1/2"(267) 1/2"(267) Suffix Description -3 3" No Hub Fitting 2 3/4"(70) 6"(152) 2 3/4"(70) 6"(152) -36 36" Long Barrel Fitting -CA-100-EXT Aux. Support System w/Extended Nipple -M1 ABS Extended Nipple (Up to 24") 1"(25)1"(25) -M3 Galvanized Steel Nipple 7" -M11 Tiling Frame 22 3/16"(56)3/16"(56) -M20 Flush Valve Supplort NOTICE ASTMASTM C564 C564 CompressionCompression Siphon jet (4 bolt) arrangement shown. Invert faceplate assembly GasketGasket for blow-out (3 bolt) bowls. 5 5/16"(135) 5 5/16"(135) Anchor legs to concrete floor with minimum 1/2" (13) anchor bolts (by others). 1111 1/2"1/2" (292)(292) Min.Min. 1717 1/4"1/4" X = 5-3/4" (146) Maximum with Standard Nipple (438)(438) Max.Max. 33"(76)"(76) 15"(381)15"(381) FaceplateFaceplate 9"(229)9"(229) Assembly "X""X" w/CompressionW/Compression SealSeal 5/16"(8)5/16"(8) NoNo Hub Hub Fitting Fitting 7 1/2"1/2" (191)(191) 0"0" Min.Min. 4"4" Max.Max. ABSABS Nipple 1717 3/4"3/4" w/IntegralW/Integral (451)(451) TestTest Cap Cap 4 7/87/8"" (124)(124) Min. 9 1/21/2"" Dual Slotted (241)(241) Max. Dual Slotted Note: LegsLegs Left hand carrier shown; right hand carrier is mirror image. NOTICE Removable Lugs RearRear Anchor Anchor Support Removable Lugs ForFor Shallow Shallow Rough-In Rough-In The information contained herein is not intended to replace the full product installa- tion and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product. Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor –––––––––––––––––––––––––––––––––––––––––––– Job Location ––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––– Engineer ––––––––––––––––––––––––––––––––––––––––––––– Representative ––––––––––––––––––––––––––––––––––––––––– Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. USA: Tel: (800) 338-2581 • Fax: (828) 248-3929 • Watts.com A Watts Water Technologies Company Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com ES-WD-ISCA-101-L/R-CAN 1705 © 2017 Watts.