LEICA SL / LEICA SL2 / LEICA SL2-S Lens Firmware Update EN LENS FIRMWARE These instructions for updating the firmware for the Leica SL / Leica SL2 / Leica SL2-S applies to all lenses of the L-Mount Alliance. The latest firmware for lenses from Panasonic or Sigma is available for download on the website of the respective manufacturer. 2 FIRMWARE UPDATES UPDATING THE CAMERA FIRMWARE EN Leica is continuously working on the further improvement and ▸ Switching the camera on optimization of your camera. Since many camera functions are ▸ Select Camera Information in the main menu entirely controlled by software, some of these improvements and ▸ Select Lens Firmware Version additions to the functional scope can be installed in retrospect. • This menu item is available only if a firmware file is available. Leica offers firmware updates at irregular intervals, which you can • A prompt with information about the camera is displayed. download from our website. ▸ Check the version information Leica will notify you of any new updates, once you have registered ▸ Select Start Update your camera. • The update will start automatically. • Once the process has completed successfully, a relevant mes- Find out which firmware version is currently installed sage will be displayed and the camera will restart. ▸ Select Camera Information in the main menu Notes • The current firmware version is displayed next to the menu • The camera must not be switched off before the update is item Lens Firmware Version. completed. More information about registering, firmware updates and how to • The message Battery low will appear if the battery is not download them to your camera, as well as any amendments and sufficiently charged. Please recharge the battery and then additions to this manual can be found in the customer area of our repeat the process described above. website at: club.leica-camera.com PREPARE INSTALLATION ▸ Perform the update with a fully charged battery. ▸ Format the SD card in the camera. ▸ Remove the SD card from the camera. • If necessary, delete all existing update files (camera or lens) from the SD card. • Copy the firmware file for the L-mount lens to the root directory of the SD card. ▸ Insert the SD card into the switched-off camera. 3.