A Powerful Force in Precision Strip & Foil Rolling Slitting,Heat Treating,Testing & Evaluation of Magnetic & Non-Magnetic Alloys ■ Nickel Iron Alloys: ■ Titanium Alloys: Moly Permalloy, 4750-49 Ni, Invar® 36 Titanium (grades 1 through 4), 3A1-2.5V, 15-3-3-3, Bio-Compatible Alloys ■ Controlled Expansion Alloys: NiSpan-C®,Kovar®-029, Sealmet® 2917, Al 42 ■ Nickel Base and High-Temperature Alloys: Nickel 201, 233 and 290; Inconel® 600, 601, 617, 625, 718 ■ Magnetic and Cobalt Alloys: and X750; Hastelloy® B-2, C-276, C-22 Arnokrome™,Vanadium Cobalt Alloys, Arnon™ and 3% Silicon Steel (Thin; Oriented and Non-Oriented) ■ Spring Alloys: Arnavar™,Havar®, Elgiloy® ■ Copper-Base Alloys: Beryllium Copper Alloy 25, OFHC Copper, ■ Ferrous Based: Phosphor Bronze Carbon and Low Alloy Steels, Stainless Steels, Pure Iron Arnold’s Rolled Products works extensively with these and a number of other magnetic and non-magnetic alloys to exceed your demanding physical and mechanical requirements. Arnold’s own ARNOKROME™ is one example of our capabilities. We can customize the properties of ARNOKROME™ or other alloys to satisfy a variety of mechanical, surface, magnetic, or other requirements. Capabilities: ■ Precision thin gauge alloy foil available in: sheet, strip and continuous coils. Available widths from 16.5" to a minimum of 0.035" (0.9 mm). Minimum thickness of 0.0005" (0.0125 mm) for 4 to 16.5" in width and 0.000085" (2.16 micron) for 4" widths and less. ■ Arnold offers wire, rod and bar stock for selected magnetic alloys such as the ductile ARNOKROME™ III alloy developed by Arnold based on the iron-chrome-cobalt alloy system. ARNOKROME™ III is a lower cost, more readily available alternative to CuNiFe, Vicalloy and Cobalt Steels.We also offer Vanadium Permendur soft magnetic bar stock (Fe-V-Co) which, with the highest magnetic saturation available, is particularly useful in pole pieces and guide tubes. ■ Piece Parts can be provided. Examples include hysteresis rings, precision laminations, small washer and vane shaped magnets, magnetic clutch and brake discs, level sensor components and gauge vanes. When you’re searching for thin gauge alloys, Arnold PROVIDES SOLUTIONS. Conversion of Customer-Owned Materials: ■ Nickel Chrome: Balco®, Constantan, Evanohm® and Monel® STRIP WIDTH 0.035 in 4.0 in 4.5 in 16.5 in ■ Stainless Steels: AISI Types 301, 302 and 304, etc. Inches (mm) 0.9 (mm) 101.6 (mm) 114.3 (mm) 419.1 (mm) 0.060 1.524 ■ Other Materials: Amorphous Alloys, Precious Metals, 0.0005 0.013 Aluminum,Titanium and Zirconium 0.0004 0.010 0.0001 0.003 Notes: THICKNESS Some alloys can be supplied at thicknesses less than 0.0001" Maximum starting thickness is normally 0.060" Special arrangements can be made for thicker materials Maximum starting width is 17.5" Arnold Manufacturing Processes Produce Components for Critical & Diverse Applications: ■ Hysteresis Drive Couplings ■ Magnetic ID Tag Stock ■ Transformers ■ Springs ■ Battery Components ■ Motor Laminates (specialized, thin) ■ Strain Gauges ■ Heat Shielding ■ EMI Shielding ■ Shielding (Magnetic and EMI) ■ Magnetic and Electromagnetic Sensors ■ Radiation Windows ■ Gaskets ■ Honeycomb Structures ■ Barrier Membranes ■ Brazing Alloys ■ Implant Devices ■ Sacrificial Wear Surfaces History of Rolled Products The Arnold Precision Rolling Mill was established in 1950 to manufacture strip and foil alloys. The need for precise thickness and process control required Arnold to develop specialized processes that were capable of achieving necessary characteristics in a variety of alloys. Our experience with these techniques and capabilities has earned us a reputation as a premier custom processor of a wide spectrum of Strip & Foil. Arnold products are preferred by many companies in the aerospace, medical electronics, telecommunications, instruments, sensors, electrical and metalworking industries. To ensure continued conformance with the quality demanded by today’s competitive environment, Arnold has invested in personnel, training, equipment and quality control programs to meet our customer’s stringent requirements. We understand the need for development work as well as large scale production and routinely provide custom products by the pound or by the truckload. Our development cycles with customers have run from one week to several years, so don’t hesitate to call us with your needs from the esoteric to everyday. When you’re searching for thin gauge alloys, Arnold PROVIDES SOLUTIONS. ROLLED PRODUCTS 300 N.West Street, Marengo, IL 60152 Phone: 800-545-4578 • (+1) 815-568-2475 • Fax: 815-568-2477 [email protected] www.arnoldmagnetics.com ARNOKROME, ARNAVAR & ARNON are trademarks of the Arnold Engineering Company • INVAR is a registered trademark of Imphy S.A. Corp. • INCONEL is a registered trademark of Huntington Alloys Corp. • SEALMET is a registered trademark of Allegheny Ludlum Industries, Inc. • EVANOHM is a registered trademark of Carpenter Technology Corp. • MONEL & NI-SPAN-C are registered trademarks of Inco Alloys International, Inc.,• HASTELLOY is a registered trademark of Haynes International, Inc. Corp. • BALCO & KOVAR are registered trademarks of CRS Holdings, Inc. Corp. • HAVAR is a registered trademark of Hamilton Precision Metals, Inc. • ELGILOY is a registered trademark of Elgin National Watch Company ©2004, Arnold Engineering Company 2/04 Printed in the U.S.A.