Gas WATERS EQUIPMENT WANQW Liquid & Slurry WATER-COOLED SAMPLE CHILLER Solid & Powder Sample Chillers Steam & Water SAMPLE CONDITIONING A sample chiller provides controlled temperature water (coolant) to a group of secondary sample coolers in order to ensure closely controlled sample temperatures. The Waters Equipment® WANQW water-cooled sample chiller systems are pre-designed, pre-piped packages available in sizes from 3 to 15 tons. MODELS WANQW03 | WANQW05 | WANQW08 | WANQW10 | WANQW15 BENEFITS With the Waters Equipment WANQW water-cooled sample chillers, all components are easily accessible for service. Each undergoes a factory run-in under a range of heat loads. Measurements are taken of critical parameters and recorded for future reference. Options include chillers suitable for higher condenser cooling water temperature ranges of 60°F (15°C) to 115°F (46°C) and lower condenser cooling water ranges of 30°F (-1°C) to 90°F (32°C), outdoor installation (NEMA 4), CE marked models, or optional internal electric heater for additional warming capacity for subcooled samples. FEATURES Cools water at a precisely-controlled Wide condenser cooling water temperature with ± 1°F (0.5°C) temperature range: 55–105°F accuracy (13–41°C) Self-contained with all necessary Local display provides quick controls, pumping and refrigeration operational snapshot systems WATERS EQUIPMENT WANQW > SAMPLE CHILLERS > SAMPLE CONDITIONING •••• • H W L Front View Right View Rear View condenser water chilled water size (tons) dimensions (L x W x H) weight connections connections W03 48 x 35 x 54 in (1219 x 889 x 1372 mm) 720 lb (327 kg) 1-1/2" NPT 2" NPT W05 48 x 35 x 54 in (1219 x 889 x 1372 mm) 720 lb (327 kg) 1-1/2" NPT 2" NPT W08 75 x 35 x 54 in (1905 x 889 x 1372 mm) 1195 lb (542 kg) 1-1/2" NPT 2-1/2" NPT W10 75 x 35 x 54 in (1905 x 889 x 1372 mm) 1195 lb (542 kg) 1-1/2" NPT 2-1/2" NPT W15 75 x 35 x 54 in (1905 x 889 x 1372 mm) 1315 lb (597 kg) 1-1/2" NPT 3" NPT SPECIFICATIONS model number WANQW03 WANQW05 WANQW08 WANQW10 WANQW15 36,000 BTU/hr 60,000 BTU/hr 96,000 BTU/hr 120,000 BTU/hr 180,000 BTU/hr cooling capacity1 (10.6 kw) (17.6 kw) (28.1 kw) (35.1 kw) (52.7 kw) 30 gpm 50 gpm 80 gpm 100 gpm 150 gpm chilled water flow rate2 (114 lpm) (189 lpm) (303 lpm) (379 lpm) (568 lpm) 10,800 BTU/hr 18,000 BTU/hr 28,800 BTU/hr 36,000 BTU/hr 54,000 BTU/hr standard heating capacity (3.2 kw) (5.3 kw) (8.4 kw) (10.6 kw) (15.8 kw) condenser water flow rate 11 gpm (42 lpm) 17 gpm (64 lpm) 24 gpm (91 lpm) 36 gpm (136 lpm) 48 gpm (182 lpm) condenser water pressure drop 6 psi (0.4 bar) 6 psi (0.4 bar) 8 psi (0.6 bar) 7 psi (0.5 bar) 8 psi (0.6 bar) mca3 at 460 VAC, 60 Hz 15.9 18.1 27.2 32.0 52.1 30,000 BTU/hr 30,000 BTU/hr 30,000 BTU/hr 40,000 BTU/hr 60,000 BTU/hr auxiliary heater (9 kw) (9 kw) (9 kw) (12 kw) (18 kw) ¹ Cooling capacity based upon 110°F (43°C) ambient air and 76°F (24°C) coolant setpoint, 60 Hz power 2 Other C.W. flow rates available upon application ³ MCA = Minimum Circuit Ampacity; used for main power wire sizing (not including auxiliary heater) Note: Cooling and heating capacity is reduced about 17% for 50 Hz power sentry-equip.com 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 U.S.A. | +1-262-567-7256 | [email protected] © 2016 Sentry Equipment Corp. All rights reserved. All product and company names are property of their respective owners. It is solely the responsibility of end users, through their own testing and analysis, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied and properly maintained, and to limit their use to their intended purpose. Improper selection, installation or use may result in personal injury or property damage. W-SW-SPS-00019-1 3-16.