BMW 3 Series Sedan bmw.com.au THE BMW 3 SERIES SEDAN. SPECIFICATION GUIDE. MODELS. Transmission Cylinder / Power / Combined fuel Acceleration Capacity Torque consumption 0-100km/h cm3 l/100km Petrol Models 4-cylinder 100kW 316i 8-speed automatic 5.9 9.2 sec 1,598 220Nm 8-speed sport 4-cylinder 135 kW 320i 6.0 7.3 sec automatic 1,997 270 Nm 8-speed sport 4-cylinder 180 kW 328i 6.3 5.9 sec automatic 1,997 350 Nm 8-speed sport 6-cylinder 225 kW 335i 7.2 5.2 sec automatic 2,979 400 Nm Diesel Models 8-speed sport 4-cylinder 135 kW 320d 4.5 7.4 sec automatic 1,995 380 Nm Hybrid Models 8-speed sport 6-cylinder 250 kW ActiveHybrid 3 5.9 5.3 sec automatic 2,979 450 Nm BMW recommends the use of RON 95 super unleaded petrol. Unleaded 91 RON and higher with a maximum ethanol content of 10% (E10) may also be used. Output and fuel consumption figures apply to RON98 fuel. All engines meet the EU5 emissions standard. Fuel consumption is determined in accordance with the ECE driving cycle (93/116/EU), which consists of approximately one third urban traffic and two thirds extra-urban driving (based on the distance covered). CO2 emissions are measured in addition to fuel consumption. Optional equipment (e.g. wider tyres) can have a significant impact on fuel consumption. ■ Standard While BMW Group Australia has endeavoured to ensure that all information, representations, illustrations and specifications contained in these materials are accurate at the time of publication (6 May 2015), the information is general in nature only. Product features, specifications, models and prices are subject to change without notice. The general information in these materials should always be read in conjunction with information from authorised BMW dealers. To the extent permitted by law, BMW Group Australia excludes all express and implied warranties or guarantees and all liability, whether direct, indirect, special or consequential, arising from negligence or otherwise relating to the use of these materials, any inaccuracies and for any non-compliance by any vehicle with any representation, illustration, specification, description, product feature, colour, or other information contained in these materials. © BMW Australia Ltd (ABN 11 004 675 129) (“BMW Group Australia”) and BMW AG, Munich/Germany. All rights reserved. 2 STANDARD EQUIPMENT. 316i 320i 320d 328i 335i 3 ActiveHybrid Transmission and technology 8-speed automatic transmission, with gearshift indicator for manual mode 8-speed sport automatic transmission with gearshift paddles on steering wheel, launch control, and gearshift indicator for manual mode 8-speed sport automatic transmission with gearshift paddles on steering wheel and gearshift indicator for manual mode Adaptive M suspension with ride height lowered 10mm and shock absorber comfort adjustable by Driving Experience Control, giving a more sporting suspension setup without any loss in ride comfort Auto Start/Stop function, reduces fuel consumption by switching off the engine when the vehicle comes temporarily to a stop BMW TwinPower Turbo four-cylinder petrol engine combining one twin-scroll turbocharger with Valvetronic, Double-VANOS and High Precision Injection BMW TwinPower Turbo four-cylinder diesel engine with a turbocharger with variable turbine geometry and common rail direct injection BMW TwinPower Turbo six-cylinder in-line petrol engine combining one twin-scroll turbocharger with Valvetronic, Double-VANOS and High Precision Injection BMW TwinPower Turbo six-cylinder in-line petrol engine, one twin-scroll turbocharger with Valvetronic, Double-VANOS and High Precision Injection in combination with 40kW electric engine, powered by lithium-ion battery Brake Energy Regeneration, improves fuel efficiency and ensures that the full power of the engine is available for acceleration Brake-pad wear indicator Condition Based Service, inspections are scheduled to suit the way in which the car is driven Diesel particle filter (maintenance-free) Driving Experience Control, enables adjustment of drivetrain settings (ECO PRO, Comfort, Sport and Sport+) Note: Sport+ mode not standard for 316i ECO PRO Mode, optimises fuel consumption and shows the potential fuel economy in the instrument cluster Electronic differential lock, active in DSC Off mode Electric Power Steering with Servotronic Start/Stop button, incl. keyless engine start Safety Active Protection, safety package for initiating protective measures for the occupants if an accident situation is imminent: belt tensioning, windows are closed, sliding sunroof is closed (if fitted). Incl. Attentiveness Assistant Airbags: driver and front passenger airbags, head airbags in the front and rear, side airbags for driver and front passenger Brakes: disc brakes at the front and rear, inner-vented Central locking with electronic immobiliser, crash sensor; fuel tank filler cap integrated into central locking system Dynamic braking lights, flashing brake lights and hazard indicator under extreme braking Dynamic Stability Control (DSC) incl. Antilock Braking System (ABS), Brake Assistant, Cornering Brake Control (CBC) and Dynamic Traction Control (DTC) Safety body shell: deformation zones at the front and rear, easily-replaceable deformation elements that absorb impacts at speeds up to 15 km/h; integrated side impact protection in doors Seat belts: three-point seat belts for all rear seats; three-point inertia-reel seat belts in the front with belt tensioners and belt force limiters Warning triangle and first aid kit ■ Standard While BMW Group Australia has endeavoured to ensure that all information, representations, illustrations and specifications contained in these materials are accurate at the time of publication (6 May 2015), the information is general in nature only. Product features, specifications, models and prices are subject to change without notice. The general information in these materials should always be read in conjunction with information from authorised BMW dealers. To the extent permitted by law, BMW Group Australia excludes all express and implied warranties or guarantees and all liability, whether direct, indirect, special or consequential, arising from negligence or otherwise relating to the use of these materials, any inaccuracies and for any non-compliance by any vehicle with any representation, illustration, specification, description, product feature, colour, or other information contained in these materials. © BMW Australia Ltd (ABN 11 004 675 129) (“BMW Group Australia”) and BMW AG, Munich/Germany. All rights reserved. 3 STANDARD EQUIPMENT. 316i 320i 320d 328i 335i 3 ActiveHybrid Wheels and tyres 17” BMW light-alloy wheels (styling dependent on selected BMW Line) 7.5 J x 17” with 225/50 R17 18” BMW light-alloy wheels (styling dependent on selected BMW Line) 8 J x 18” with 225/45 R18 19” BMW light-alloy wheels (styling dependent on selected BMW Line/Package), front 8 J x 19” with 225/40 R19, rear 8.5 J x 19” with 255/35 R19 run-flat safety tyres Locking wheel bolts Run-flat safety tyres incl. run-flat indicator Exterior design Exhaust pipe, 70mm, single, round, left, (styling dependent on selected BMW Line) Exhaust pipe, 65mm, dual, round, left (styling dependent on selected BMW Line) Exhaust pipes, 80mm, single, round, left and right (styling dependent on selected BMW Line) Exterior mirror housing with integrated additional turn indicator, mirror caps in body colour Ornamental front grille (styling dependent on selected BMW Line) Window recess cover (styling dependent on selected BMW Line) ConnectedDrive Intelligent Emergency Call, BMW ConnectedDrive automated transmission of vehicle accident information and telephone call for assistance to the BMW ConnectedDrive Call Centre. Emergency services are informed by the BMW ConnectedDrive Call Centre on behalf of the customer and deployed if required. Manual emergency call can also be initiated via SOS button TeleServices, BMW ConnectedDrive automated transmission of service-related vehicle data to your preferred service dealer. Includes TeleServices Battery Guard and BMW Breakdown calls to Roadside Assistance Driver assistance Cruise Control with braking function Driving Assistant, incl. Approach Control Warning, Lane Departure Warning, pedestrian warning/approach control warning with light city braking function Head-Up Display, important driving information is projected onto the windscreen in the driver’s field of vision Lane Change Warning System, detects and alerts driver to vehicles in driver’s blind spot when the indicator is activated, with a discreet vibration of the steering wheel and visual warning on the exterior mirror Park Distance Control (PDC), front and rear Rear View Camera Speed limit device, enables setting of desired maximum speed; indicator in the control display and in the instrument cluster. Can be overridden when necessary Surround View incl. Top View and Side View. Top View provides a bird’s-eye perspective of the vehicle; Side View provides visibility in situations where vision is obscured, through cameras located each side of the front bumper ■ Standard While BMW Group Australia has endeavoured to ensure that all information, representations, illustrations and specifications contained in these materials are accurate at the time of publication (6 May 2015), the information is general