FIE Guidelines Regarding Authorised Identifications Games of the XXXII Olympiad Fencing Tokyo 2020 Please be aware of the complementary document General Guidelines to perfectly handle purpose of Authorised Identifications. International Federations Documents direct access coming soon National Olympic Committees Documents direct access coming soon Side view Guidelines Regarding 12.5cm Authorised Identifications see Sport Equipment Games of the XXXII Olympiad Tokyo 2020 see Section 10 10cm FIE see Sport Equipment Fencing 30cm 2.5cm Front on the hip see Sport on the side of the non-sword arm Equipment 30cm on saber jacket see Section 12 Floating Precise 10cm Identification of at the bottom of the trouser leg the anufacturer on one side only Product Technology Identification NO Emblem and National Identity 10cm Homologation Marks As retail trade Guidelines Regarding Authorised Identifications Games of the XXXII Olympiad 10cm Tokyo 2020 on one side or 5cm on each side FIE NAME NOC Fencing 1-1.5cm × 8-10cm 1-1.5cm × 8-10cm in dark blue in dark blue 30cm on foil jacket Back see Section 12 6cm Floating Precise Identification of the anufacturer Product Technology Identification NO Emblem and National Identity Homologation Marks Application of Guidelines regarding Authorised Identifications Guidelines Regarding Authorised Identifications Games of the XXXII Olympiad Clothing Tokyo 2020 Jacket One Identification of the Manufacturer [ ] per clothing item will be Electric jacket permitted, to a maximum size of 30cm2. The Identification of the Breeches Manufacturer should be located at the bottom of the jacket on the hip on the side of the non-sword arm. Tracksuit FIE One additional Product Technology Identification [ ] will be permitted per clothing item to a maximum size of 10cm2. The Product Technology Fencing Identification should be located at the bottom of the trouser leg, on one side of the non-sword arm. Socks One Identification of the Manufacturer [ ] will be permitted, to a maximum size of 10cm2. Sport Equipment Fencing weapon One Identification of the Manufacturer [ ] will be permitted, to a maximum size of 2.5cm2. The placement on an external metal surface All General Principles apply unless gard of the saber weapon is not allowed. expressly mentioned otherwise above (in particular in relation to size, frequency, location or Sports Brand requirements). Mask One Identification of the Manufacturer [ ] will be permitted, to a maximum size of 12.5cm2 and should be located directly on the lower part of the lateral mesh on the left side or on the right side. No additional identifications should be displayed on the bib of the mask (foil, épée, saber). Sport Equipment Glove One Identification of the Manufacturer [ ] will be permitted, to a Guidelines Regarding Authorised Identifications maximum size of 10cm2 and should be located in an internal part of Games of the XXXII Olympiad the brush and must be inner forearm on the cuff. Tokyo 2020 Accessories Sockets One Identification of the Manufacturer [ ] per item will be permitted, FIE to a maximum size of 6cm2. Fencing Head One Identification of the Manufacturer [ ] per item will be permitted, accessories to a maximum size of 10cm2 or two Identifications of the Manufacturer, to a maximum size of 5cm2 each, placed above each ear. Bag One Identification of the Manufacturer per item will be permitted, not greater than 10% of the surface area of the item, to a maximum size of 60cm². Glasses Glasses may carry the Identification of the Manufacturer as generally used on products sold through the retail trade during the period of 6 months or more prior to the Games, with the Identifications permitted All General Principles apply unless on the lenses so long as such identifications are tone-on-tone, engraved expressly mentioned otherwise above (in particular in relation to size, frequency, into the lens, and is not deemed as conspicuous by the IOC. location or Sports Brand requirements). Shoes/Footwear Shoes All footwear items may carry the Identification of the Manufacturer as Guidelines Regarding Authorised Identifications generally used on products sold through the retail trade during the Games of the XXXII Olympiad period of 6 months prior to the Games. Tokyo 2020 Additional IF Specifications FIE The following IF technical requirements apply in relation to the General Guidelines: Fencing Section 8 · Third Party Identifications (athlete names) The athlete’s name must appear on the back of the Épée jacket. The letters must be in dark blue, in capitals, between 8cm and 10cm high, and between 1cm and 1.5cm wide, according to the length of the name. The athlete’s name must appear on the back of the Foil and Saber electric jacket. The letters must be in dark blue, in capitals, between 8cm and 10cm high, and between 1cm and 1.5cm wide, according to the length of the name. Section 10 · NOC Emblems and National Identity The NOC code must appear on the back of the Épée jacket. The letters must be in dark blue, All General Principles apply unless expressly mentioned otherwise above in capitals, between 8cm and 10cm high, and between 1cm and 1.5cm wide. (in particular in relation to size, frequency, location or Sports Brand requirements). The NOC code must appear on the back of the Foil and Saber electric jacket. The letters must be in dark blue, in capitals, between 8cm and 10cm high, and between 1cm and 1.5cm wide. National flags or NOC emblems [ ] can appear on the only on frontal part of a mask in accordance with the FIE’s “Drawings on masks approved by the Executive Committee”. National marks cannot be applied on bib or on a side part mask. National marks [ ] can appear also on jackets and breeches in accordance with the FIE’s “Logos of the national colours on clothing approved by FIE”. Guidelines Regarding All designs must be submitted to the FIE for approval at the latest 30 days before the Olympic Authorised Identifications Games. Games of the XXXII Olympiad Tokyo 2020 Section 12 · Homologation Marks A homologation mark [ ] must appear on all blades, under plastron, jackets, masks, and electric jackets, and include the Identification of the Manufacturer, the date of manufacturing and the FIE logo. FIE Electric jackets must carry the Identification of the Manufacturer, the date of manufacturing and must be located as follow: Fencing In Saber: one Identification of the Manufacturer for clothes will be resolved to the maximum size of 30cm2. The homologation mark should appear at the basis of the electric jacket, (except on the electric surface) and on the side of the non-sword hand. In Foil: The homologation mark must be located at the back of the electric jacket, on the belt surface with the maximum size of 30cm2.No additional identifications should appear with the above authorised homologation mark and Identification of the Manufacturer. Section 17 · Submission Process Items which must undergo a mandatory verification process by the FIE are the following: All General Principles apply unless weapons, body wires, jackets and breeches, conductive jackets, gloves, masks and mask- expressly mentioned otherwise above to-jacket leads. (in particular in relation to size, frequency, location or Sports Brand requirements). All items which have been checked by the FIE will be distinctively marked. A special stamp is used to mark the mask, glove, under-plastron, conductive jacket and masks. A special ink or paint is to be used to mark the guards, blades and points of weapons that have been checked..