® Holemaking 7 5 Products & 8 1 Accessories e Klein drill bits and holemaking products c provide accuracy and consistency for professionals. Made of top-of-the-line n materials for longer-lasting performance, i Klein's diverse line of holemaking S products and accessories help get the job done right. s l a n o i s s e f o r P r o F Flexible Drill Bits Flex Bit Augers 53719 • Used to drill holes through wood within a wall. • Tapered back for easy bit retrieval. • Spring steel shaft resists deformation. 53720 • Screw point tip pulls the bit through wood. • Hole in tip allows for use with wire or cable pulling grip. Cat. No. Length Weight (lbs.) 53719 53716 3/8" x 54" (9.5 mm x 1372 mm) 1.00 53717 3/8" x 72" (9.5 mm x 1829 mm) 1.00 Holemaking Products 53718 9/16" x 54" (14 mm x 1372 mm) 1.00 53718 53719 3/4" x 54" (19 mm x 1372 mm) 2.00 53751 3/4" x 72" (19 mm x 1829 mm) 2.00 53720 1" x 54" (25 mm x 1829 mm) 2.00 53716 & Accessories Flex Bit Extensions 53722 • Connects to the end of a flex bit and extends the length. • For use with flex bits 3/4" and larger (Cat. No. 53722). • Connection diameter is 5/8" (Cat. No. 53722). • For use with flex bits 9/16" and smaller (Cat. No. 53723). • Connection diameter is 7/16" (Cat. No. 53723). Cat. No. Length Connection Diameter Weight (lbs.) 53722 54" (1372 mm) 5/8" (14 mm) 1.00 53723 54" (1372 mm) 7/16" (11 mm) 1.00 Flex Bit Placement Tool • Folding design stores more compactly than standard tool. • Cushion grip handle for non-slip comfort. • For use with flexible drill bits. • Positions flexible drill bits horizontally or vertically 53715 within a wall. Cat. No. Length Weight (lbs.) 53715 11" (279 mm) 1.00 267 All dimensions are in inches and (millimeters) unless otherwise specified. All dimensions are in inches and (millimeters) unless otherwise specified. WARNING: Never use on or near live electrical circuits. WARNING: Always ensure that you and persons in the vicinity wear WARNING:WARNING: AlwaysNever use wear on approved or near liveeye electrical protection. circuits. approvedNOTE: Read eye and protection. follow safety instructions in power tool owner's manual. Pulling Grips Pulling Grips KPS050 KPS075 • Clips to flex bit for pulling wire and cable. • Grip (Cat. No. KPS050) is used to pull up to 9/16" diameter wire, cable or fish tape through walls; grip (Cat. No. KPS075) up to 1". • Pulling grip attaches to the hole in the tip of the flex bit; wire mesh holds the wire during the pull. • Swivel end helps reduce twisting. Cat. No. Capacity Maximum Safe Load Weight (lbs.) WARNING: Do not exceed maximum safe load as listed on the KPS050 1/2" - 9/16" (12 mm - 14 mm) 100 lb 1.00 label attached to the product. KPS075 3/4" - 1" (19 mm - 25 mm) 185 lb 1.00 WARNING: Always match proper size and type of grip to application. WARNING: Always inspect equipment before use. Flex Bit Kit Flex Bit Kit Holemaking Products Holemaking Products & Accessories • 3-piece kit includes folding placement tool, 1/2"-9/16" O.D. pulling grip and 9/16" x 54" flexible drill bit. • Everything you need to pull up to 9/16" O.D. wire. • Complete kit used for drilling and pulling wire and cable. • Use placement tool (Cat. No. 53715) to guide bit through walls. • Flexible drill bit (Cat. No. 53718) makes 9/16" holes in wood. • Pulling grip (Cat. No. KPS050) attaches to the flexible drill bit after the hole has been made and pulls 1/2" – 9/16" wire and cable. Cat. No. Kit Contains Weight (lbs.) 53721 2.00 Cat. Description No. 53715 flex bit placement tool 53718 flex drill bit - 9/16" x 54" (14 mm x 1372 mm) KPS050 pulling grip - 1/2"–9/16" (12 mm - 14 mm) 53721 268 All dimensions are in inches and (millimeters) unless otherwise specified. All dimensions are in inches and (millimeters) unless otherwise specified. WARNING: Never use on or near live electrical circuits. WARNING: Always ensure that you and persons in the vicinity wear WARNING: Always Never wearuse on approved or near eyelive protection.electrical circuits. NOTE:approved Read eye and protection. follow safety instructions in power tool owner's manual. Hole Saw Kits Hole Saw Kits Master Electrician’s Hole Saw Kit • Includes the most commonly used saws and arbors. • All components are packed in a metal carrying case. Cat. No. Set Contains Weight (lbs.) 31640 8.10 Hole Saws Arbors Cat. No. Size Cat. No. Size 31514 7/8" 31650 1/4" 31518 1-1/8" 31660 7/16" 31522 1-3/8" 31670 7/16" Holemaking Products 31528 1-3/4" 31532 2" 31540 2-1/2" 31548 3" 31558 3-5/8" & Accessories 31566 4-1/8" 31572 4-1/2" Note: Set pilot drill point 1/8" beyond tooth points. Note: Read and follow safety instructions in power tool owner’s manual. 31640 Large Size Hole Saw Kit • Contains the sizes necessary to upgrade an Electrician‘s Hole Saw Kit into a Master Electrician‘s set. • All components are packed in a metal carrying case. Cat. No. Set Contains Weight (lbs.) 31645 6.60 Hole Saws Arbors Cat. No. Size Cat. No. Size 31548 3" 31670 7/16" 31558 3-5/8" Journeyman’s Hole Saw Kit 31566 4-1/8" • The most frequently used sizes and an arbor extension 31572 4-1/2" for hard to reach spots. Note: Set pilot drill point 1/8" beyond tooth points. • All components are packed in a rust-proof, molded Note: Read and follow safety instructions in power tool owner’s manual. plastic carrying case. Electrician’s Hole Saw Kit Cat. No. Set Contains Weight (lbs.) 31635 4.50 • Contains the most popular sizes for basic electrical work. Hole Saws Arbors • All components are packed in a rust-proof, molded plastic Cat. No. Size Cat. No. Size carrying case. 31512 3/4" 31650 1/4" Cat. No. Set Contains Weight (lbs.) 31514 7/8" 31660 7/16" 31518 1-1/8" 31670 7/16" 31630 2.60 Hole Saws Arbors 31522 1-3/8" Cat. No. Size Cat. No. Size 31524 1-1/2" Arbor Extender 31514 7/8" 31660 7/16" 31528 1-3/4" Cat. No. Size 31518 1-1/8" 31670 7/16" 31532 2" 31678 12" 31522 1-3/8" 31536 2-1/4" 31528 1-3/4" 31540 2-1/2" 31532 2" Note: Set pilot drill point 1/8" beyond tooth points. 31540 2-1/2" Note: Read and follow safety instructions in power tool owner’s manual. Note: Set pilot drill point 1/8" beyond tooth points. Note: Read and follow safety instructions in power tool owner’s manual. 269 All dimensions are in inches and (millimeters) unless otherwise specified. WARNING: Always ensure that you and persons in the vicinity wear WARNING: Never use on or near live electrical circuits. approved eye protection. Hole Saws Bi-Metal Hole Saws • Rugged bi-metal cobalt construction for heavy-duty cutting. • Deep cup cuts through studs in one pass. • Variable pitch teeth for faster, smoother cutting and less vibration. • Longer lasting design for more cuts per saw. • Multiple knock-out slots and holes for easy core removal. 31532 • Cuts through steel, wood, plastic, stainless steel, and cast iron. 31600 Cat. No. Saw Diameter Pipe Tap Size* Pipe Entr. Size** For Use with Arbor No. Weight (lbs.) 31510 5/8" (16 mm) — — 31650, 31655, 31660 .05 31512 3/4" (19 mm) 1/2" (13 mm) 3/8" (10 mm) 31650, 31655, 31660 .06 31514 7/8" (22 mm) 3/4" (19 mm) 1/2" (13 mm) 31650, 31655, 31660 .60 31516 1" (25 mm) — — 31650, 31655, 31660 .07 31518 1-1/8" (29 mm) 1" (25 mm) 3/4" (19 mm) 31650, 31655, 31660 .08 31520 1-1/4" (32 mm) — — 31168, 31665, 31670 .09 31522 1-3/8" (35 mm) — 1" (25 mm) 31168, 31665, 31670 .12 31524 1-1/2" (38 mm) 1-1/4" (32 mm) — 31168, 31665, 31670 .09 31526 1-5/8" (41 mm) — — 31168, 31665, 31670 .10 31528 1-3/4" (44 mm) 1-1/2" (38 mm) 1-1/4" (32 mm) 31168, 31665, 31670 .11 Holemaking Products Holemaking Products & Accessories 31532 2" (51 mm) — 1-1/2" (38 mm) 31168, 31665, 31670 .13 31534 2-1/8" (54 mm) — — 31168, 31665, 31670 .14 31536 2-1/4" (57 mm) 2" (51 mm) — 31168, 31665, 31670 .15 31538 2-3/8" (60 mm) — — 31168, 31665, 31670 .16 31540 2-1/2" (64 mm) — 2" (51 mm) 31168, 31665, 31670 .17 31542 2-5/8" (67 mm) 2-1/2" (64 mm) — 31168, 31665, 31670 .18 31544 2-3/4" (70 mm) — — 31168, 31665, 31670 .19 31548 3" (76 mm) — 2-1/2" (64 mm) 31168, 31665, 31670 .22 31552 3-1/4" (83 mm) 3" (76 mm) — 31168, 31665, 31670 .26 31556 3-1/2" (89 mm) — — 31168, 31665, 31670 .28 31558 3-5/8" (92 mm) — 3" (76 mm) 31168, 31665, 31670 .29 31564 4" (102 mm) — — 31168, 31665, 31670 .33 31566 4-1/8" (105 mm) — 3-1/2" (89 mm) 31168, 31665, 31670 .36 31568 4-1/4" (108 mm) 4" (102 mm) — 31168, 31665, 31670 .36 31572 4-1/2" (114 mm) — 4" (102 mm) 31168, 31665, 31670 .40 31576 4-3/4" (121 mm) — — 31168, 31665, 31670 .50 31580 5" (127 mm) — — 31168, 31665, 31670 .54 31596 6" (152 mm) — — 31168, 31665, 31670 .75 31600SEN 6-3/8" (162 mm) — — 31168, 31665, 31670 2.00 31606 6-5/8" (168 mm) — — 31168, 31665, 31670 2.25 Note: Set pilot drill point 1/8" beyond tooth points.