IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 2336:1988/AC1:1988 Date published 1 JANUARY 2006 Aerospace Series - Bearings, Spherical Plain in Steel with Assembly Slots - Dimensions and Loads 2. I.S. EN 28378-1:1989/AC1:1989 Date published 1 JANUARY 2006 Information Processing - Data Interchange on 130 mm (5.25") Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7958 ftprad, 3.8 tpmm (96 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics. (ISO 8378-1, 1st Edition, 3. I.S. HD 1215-2:1988/AC1:1989 Date published 1 JANUARY 2006 Thermostatic Radiator Valves - Part 2 : Dimensions and Details on Connection 4. I.S. EN 50203:1996/A1:1999 Date published 2 FEBRUARY 2006 Automatic channel installation (ACI) 5. I.S. EN 54-2:1999 Date published 1 JANUARY 2006 Fire detection and fire alarm systems - Part 2: Control and indicating equipment 6. I.S. EN 12737:2004 Date published 28 JULY 2006 Precast concrete products - Floor slats for livestock 7. I.S. EN 61009-1:1994/A13:2004 Date published 2 FEBRUARY 2006 Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules 8. I.S. EN 50091-1-1:2004 Date published 2 FEBRUARY 2006 Uninterruptible power systems (UPS) -- Part 1-1: General and safety requirements for UPS used in operator access areas 9. I.S. EN 60432-1:2004 Date published 2 FEBRUARY 2006 Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999 (MOD)) 10. I.S. EN 61131-2:1994/A12:2004 Date published 2 FEBRUARY 2006 Programmable controllers -- Part 2: Equipment requirements and tests 11. I.S. EN 60335-2-35:1998/A1:2004 Date published 2 FEBRUARY 2006 Safety of household and similar electrical appliances -- Part 2-35: Particular requirements for instantaneous water heaters (IEC 60335-2-35:1997/A1:1999 (EQV)) 12. I.S. EN 61360-2:2002/A1:2004 Date published 2 FEBRUARY 2006 Standard data element types with associated classification scheme for electric components -- Part 2: EXPRESS dictionary schema (IEC 61360-2:2002/A1:2003 (EQV)) Date: 18/07/2018 Page 1 13. I.S. EN 1993-1-1:2005 Date published 10 MAY 2006 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings 14. I.S. EN 13748-1:2004/A1:2005 Date published 1 JANUARY 2006 Terrazzo tiles - Part 1: Terrazzo tiles for internal use 15. I.S. EN 1994-1-2:2005 Date published 30 DECEMBER 2006 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design 16. I.S. EN ISO 13792:2005 Date published 12 JANUARY 2006 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2005) 17. I.S. EN ISO 4628-8:2005 Date published 12 JANUARY 2006 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe (ISO 4628-8:2005) 18. I.S. EN ISO 3126:2005 Date published 12 JANUARY 2006 Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) 19. I.S. EN ISO 10081-1:2005 Date published 12 JANUARY 2006 Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081 -1:2003) 20. I.S. EN ISO 10081-2:2005 Date published 12 JANUARY 2006 Classification of dense shaped refractory products - Part 2: Basic products containing less than 7 % residual carbon (ISO 10081-2:2003) 21. I.S. EN ISO 10081-3:2005 Date published 12 JANUARY 2006 Classification of dense shaped refractory products - Part 3: Basic products containing from 7% to 50% residual carbon (ISO 10081-3:2003) 22. I.S. EN ISO 6134:2005 Date published 12 JANUARY 2006 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005) 23. I.S. EN ISO 2063:2005 Date published 12 JANUARY 2006 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) 24. I.S. EN 1992-2:2005 Date published 16 JANUARY 2006 Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules 25. I.S. EN 1994-2:2005 Date published 16 JANUARY 2006 Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges Date: 18/07/2018 Page 2 26. I.S. EN ISO 15547-1:2005 Date published 18 JANUARY 2006 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers (ISO 15547-1:2005) 27. I.S. EN ISO 15547-2:2005 Date published 18 JANUARY 2006 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005) 28. I.S. EN 71-11:2005 Date published 18 JANUARY 2006 Safety of toys - Part 11: Organic chemical compounds - Methods of analysis 29. I.S. EN ISO 22803:2005 Date published 18 JANUARY 2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) 30. I.S. EN 14487-1:2005 Date published 18 JANUARY 2006 Sprayed concrete - Part 1: Definitions, specifications and conformity 31. I.S. EN 13438:2005 Date published 18 JANUARY 2006 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes 32. I.S. EN 302-3:2004/A1:2005 Date published 18 JANUARY 2006 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength 33. I.S. EN 14916:2005 Date published 18 JANUARY 2006 Domestic cookware - Graphical symbols (pictograms) 34. I.S. EN ISO 389-7:2005 Date published 18 JANUARY 2006 Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under freefield and diffuse-field listening conditions (ISO 389-7:2005) 35. I.S. EN 14035-25:2005 Date published 18 JANUARY 2006 Fireworks - Part 25: Party Poppers - Specification and test methods 36. I.S. EN 14035-31:2005 Date published 18 JANUARY 2006 Fireworks - Part 31: Shell-in-mortars - Specification and test methods 37. I.S. EN 14035-21:2005 Date published 18 JANUARY 2006 Fireworks - Part 21: Jumping ground spinners - Specification and test methods 38. I.S. EN 14035-33:2005 Date published 18 JANUARY 2006 Fireworks - Part 33: Spinners - Specification and test methods Date: 18/07/2018 Page 3 39. I.S. EN 14952:2005 Date published 18 JANUARY 2006 Surfaces for sports areas - Determination of water absorption of unbound minerals 40. I.S. EN 14953:2005 Date published 18 JANUARY 2006 Surfaces for sport areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas 41. I.S. EN 14954:2005 Date published 18 JANUARY 2006 Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas 42. I.S. EN 14955:2005 Date published 18 JANUARY 2006 Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas 43. I.S. EN 14956:2005 Date published 18 JANUARY 2006 Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas 44. I.S. EN 13950:2005 Date published 18 JANUARY 2006 Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods 45. I.S. EN 14908-1:2005 Date published 18 JANUARY 2006 Open Data Communication in Building Automation, Controls and Building Management - Building Network Protocol - Part 1: Protocol Stack 46. I.S. EN 1996-1-1:2005 Date published 15 MAY 2006 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures 47. I.S. EN ISO 9100-2:2005 Date published 18 JANUARY 2006 Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005) 48. I.S. EN ISO 9100-3:2005 Date published 18 JANUARY 2006 Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005) 49. I.S. EN ISO 9100-4:2005 Date published 18 JANUARY 2006 Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005) 50. I.S. EN 14887:2005 Date published 18 JANUARY 2006 Glass packaging - Cork removal devices - General requirements 51. I.S. EN 13025-1:2005 Date published 18 JANUARY 2006 Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml Date: 18/07/2018 Page 4 52. I.S. EN 13025-2:2005 Date published 18 JANUARY 2006 Packaging - Light gauge metal containers - Part 2: Nonremovable head (tight head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml 53. I.S. EN 13025-3:2005 Date published 18 JANUARY 2006 Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml 54. I.S. EN ISO 21570:2005 Date published 18 JANUARY 2006 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005) 55.