Your Ozark Trail 300L Rechargeable Headlamp has easy access multiple switch functions: Spot Light Button Switch for Spot Light, Area Light/Red Light Switch for softer area lighting and a Red Light mode to preserve your night adapted vision. OPERATION Spot Light Button Switch: 1. Press once for “High”, twice for “Low”, third to turn “Off”. (Fig. 7) Area Light/Red Light Button Switch: 1. Press once for “High”, twice for “Low”, third to turn “Off” area light. (Fig. 7) To access Red Light Mode: 1. Press and hold down Area Light/Red Spot Light Button Area Light/Red Light Button Switch until red light User Guide User Switch Light Button Switch turns to “ON” (approximately 2 seconds), twice to turn “Off”. HEADLAMP (Fig. 1 & 6) RECHARGEABLE RECHARGEABLE OT•300L FIG. 7 Aim Adjustment Your Ozark Trail 300L Rechargeable Headlamp is equipped with a self-locking, aim adjustment feature. 1. Grasp sides of headlamp and rotate to desired position. (Fig. 8) FIG. 8 IMPORTANT INFORMATION 1. Operating time for your Ozark Trail 300L Rechargeable For Customer Service: Headlamp depends on continuous or intermittent use. Call Toll Free 1-888-774-5840 Intermittent operation extends the run time of the battery. for product questions. 2. The LEDs are a lifetime light source. They will never need to be replaced. Mon-Fri, 8:00 a.m. – 5:00 p.m. Central Time Insight 2 Design, Inc., WARNING! Do not disassemble product. Do not charge the battery if the prod- Overland Park, KS uct / battery is cracked or damaged. Do not short terminals, crush, heat above 140 Degrees F. (60 Degrees C.), throw into a fire, or incinerate. Please recycle. 10/19/17 Made in China • Printed in China Carefully read all instructions Push Button for Spot Light Battery Push Button for Area Light before use and save for future High – Low – Off Indicator High – Low – Off Light reference. Push & hold Button for Red Light The diagram (Fig. 1) will help you On – Off locate and identify various features and functions used in the User Guide of your Ozark Trail 300L Recharge- Spot Light able Headlamp. Area Lights Red Lights FIG. 1 CHARGING THE BATTERY Your Ozark Trail 300L Rechargeable Headlamp contains a rechargeable lithium-polymer battery. NOTE: The USB cable is for charging only/power only. 1. Open the Micro USB charging port (Fig. 2) 2. Plug Micro USB into input port then plug other end of cord into any USB outlet on computer, wall adaptor (not included), etc. (Fig. 3, 5 & 6) NOTE: Charging while using a USB wall adaptor will be faster than a computer USB port 3. When properly charged, the indicator light on the top of the headlamp will glow green. (Fig. 4) NOTE: Recharge the battery immediately when light output is low. Red indicator light will turn on when battery is low. 4. When battery charging is complete, remove the Micro USB from the charging port and close the USB cover (Fig. 2). Indicator Light USB Charging Port Micro USB FIG. 2 FIG. 3 FIG. 4 Computer USB Wall Adaptor USB Outlet (not included) FIG. 5 FIG. 6 (continued on back panel).