Items Slides PISTOL INDEX FRONTCUT SLIDES FOR GLOCK® 43 & 48 RMR SLIDE FOR GLOCK® Barrels ........................ 220-223 Magazines & Parts ............. 227-232 Window Slide Maximize the Performance of Stainless Steel Slide With a Bundle of Custom Features Frames/Slides ...................214-220 Magwells ..................... 224-225 Your Pocket Glock® With an ® Upgraded "Top Half" Our RMR Slides for Glock Grips & Screws ................ 241-243 Safeties............................. 223 pistols feature a distinctive, With our Front-Cut Slide in- wraparound serration pattern Guide Rods ................... 223-224 Springs ....................... 232-234 stalled, you'll find your pocket that aids in manipulating the RMS/RMSC slide, especially when checking PISTOL Glock® becomes easier to oper- Cut Slide Ignition Parts.................. 240-241 Triggers & Components......... 234-240 ate without any change in its reli- the chamber. (OK, we’ll admit ability or size. The G43's greatest it: the serrations look cool, too.) Mag & Slide Releases........... 225-226 strength is that it lets you carry a They also come with a pre-cut slot for easy, secure, low-profile pistol with 6 rounds of centerfire mounting of a Trijicon RMR sight. All Front Cut RMR Slides also have Blank Slide punch in an ultra-compact EDC standard Glock factory front and rear sight dovetails for "iron" sights. package. The downside is the Since the RMR sits low, it can easily co-witness with iron sights. In G43's such a small pistol (barely 6" addition, you can get your Front Cut RMR Slide with an optional "window" cutout on top between the front serrations that reduces ® OAL), you can have trouble getting a firm grasp on the slide to rack SLIDES FOR FOR GLOCK 17/19/34 19LS EXTENDED SLIDE FOR it. And if you're under stress or your hands are wet or a little sweaty... weight and enhances airflow to keep the barrel cooler - ideal for hard-working action competition pistols. Each Front Cut RMR Slide Factory Sight Cuts + Window ® Yeah, even more difficult to jack that first round into the chamber. Foundation for a Superb D.I.Y. Pistol - GLOCK 19 Our slide gives you up to 60% more grasping surface by adding deep- starts life as a billet of 17-4 stainless steel that is machined to Glock® Ergo Enhancements for Better Control cut serrations up front that wrap around the top of the slide. (This is factory specifications inside, so it’ll fit factory frames and accept fac- Build Your Own Hybrid " also a big help when making a quick press check of the chamber.) tory or aftermarket barrels and parts. Models available for Gen3 and ® Our front cut slide allows you Long Slide" Glock The serrations have crisp 90-degree edges that give you excellent Gen4 pistols. G26 slide accepts Gen1-4 parts; use #100-002-719 to build a custom Glock®-style recoil guide/spring assembly. All models: dedicated tool required to Brownells offers many inno- purchase, and they're cut to the same depth as the factory grooves - pistol from the ground up with a install channel liner; we recommend #777-100-017. vations for the Glock® pistol, but so there's no compromise of the slide's overall strength. These slides slide already customized with front slide serrations. Our Front Cut Available with distinctive top Window cutout or traditional one of our most novel offerings are machined from heat-treat hardened 17-4 stainless steel, with Slides feature a unique wraparound slide serration design that aids solid top. Machined from corrosion-resistant 17-4 stainless steel now gives Glock® fans the ability hard, wear-resistant matte black Nitride finish. Internal dimensions in weapon manipulation, especially when checking the chamber. billet. Heat treated to add surface hardness. Available with three RMR Cut, No Window to mix and match components are identical to factory slides, right down to the factory rear sight Serrations are cut to the same depth as Glock® factory models to finishes: wear-resistant basic Black Nitride (BLK) finish, as well as to create a custom hybrid pistol dovetail and front sight tenon cut. It will accept both factory "iron" ensure lower slide rigidity. Models are also available with top win- a thin, extremely tough, good-looking Bronze or Flat Dark Earth ideally suited to their personal (actually, plastic) sights and any aftermarket sights that fit the factory dow cutout between the front serrations. Slides start out as 17-4 (FDE) physical vapor deposition (PVD) coating. This slide is the ideal needs. The Brownells Extended Slide for Glock® 19 enables own- cuts. This is the bare slide only. You will need to retain your pistol's stainless steel billet and are machined internally to factory specifi- upgrade for your factory Glock 17 or 19 pistol - and the perfect ers of the popular G19 pistol to put an extended G17-length slide existing barrel (or an aftermarket upgrade) and recoil guide / spring cations. Slides are compatible with any standard Glock® 17 or 19 assembly. You'll also need to install a firing pin. Window model has a top half for a new custom gun built on an 80% frame. NOTE: RMR components. The factory Glock® rear sight dovetail is machined, on their guns. The result is a gun with a longer sight radius - for FRAMES/SLIDES slides include patented optic cut technology pioneered by ZEV more accurate shooting - with the G19’s shorter frame, making it .863" x .285" window cut in the top of the slide ahead of the ejection with a standard Glock® front sight cut at the front. Heat treated port, in place of the top serrations. This aids in barrel cooling, slightly Technologies. ab and finished with a matte Black Nitride finish. Factory internal di- easier to carry concealed with less risk of "printing" through your ® reduces the weight of the slide for faster cycling, and…well, it just ® mensions - so excellent compatibility with factory and aftermarket clothing. Another enhancement on our Extended Slide for Glock #078-200-001 RMR Slide for Gen3 Glock 17, BLK, 19: wraparound, front-cut slide serrations that aid in manipulating looks cool, too. Shield model has a cutout for the super-compact 8G201C44 . .$ 236.99 components. Factory Glock® sight cuts. Models for Gen3 and Gen4 RMS/RMSC (Reflex Mini Sight/Reflex Mini Sight Compact) red dot the slide, especially for a quick check of the chamber. There are ® pistols. G26 slide accepts Gen1-4 parts; use #100-002-719 recoil reflex sights from Shield Sights. Accommodates the optic the same 078-000-579 ACRO Window Slide Gen3 Glock 17, guide/spring assembly. All models: dedicated tool required to install standard, factory-style serrations at the rear. You also get standard BLK, 8G195B49 . 229.99 factory front and rear sight cuts on your Brownells extended slide so way the RMR model above does, including retaining the factory channel liner; we recommend #777-100-017. ab #078-200-003 Window RMR Slide for Gen3 Glock® 17, you can install any aftermarket sights that fit a Glock® factory slide. sight dovetail/tenon slot. Has front and rear side cocking serrations #078-000-366 Slide for Gen3 Glock® 17, 8G188G99 . $ 205.99 ONLY (none on top). Mounting screws for sight included. Blank slide BLK, 8G201J59 . 223.99 #078-000-368 Win Slide for Gen3 Glock® 17, 8G189F99 . 216.99 • Fits Gen3 Glock® 19 frame ONLY comes with no cocking serrations or markings. Edges and corners #078-000-495 Window RMR Slide for Gen3 Glock® 17, #078-000-456 Gen4 Slide for Glock® 17, 8G179A99 . 199.99 • Machined from hardened, corrosion-resistant 17-4 stainless steel billet are chamfered. Comes unfinished with fine bead-blasted surface. BRONZE, 8G208L24 . 244.99 #078-000-367 Slide for Gen3 Glock® 19, 8G188K99 . 202.99 Also fits G43X and G48. ab #078-000-497 Window RMR Slide for Gen3 Glock® 17, • Tough black Nitride finish with excellent wear resistance #078-000-440 G43 Slide w/"Iron" Sight Cuts, 8G172F54 . $ 202.99 #078-000-369 Win Slide for Gen3 Glock® 19, 8G189M99 . 216.99 FDE, 8G206N54 . 242.99 #078-000-441 G43 Window Slide w/"Iron" Sight Cuts, ® #078-000-457 Gen4 Slide for Glock® 19, 8G172H54 . 202.99 • Accepts standard 9mm internal slide components #078-000-458 Gen4 RMR Slide for Glock 17, BLK, 8G182A74 . 214.99 8G199H74 . 234.99 #078-000-480 Slide for Gen1-4 Glock® 26, 8G189L99 . 205.99 • Length: 7.21" #078-000-452 G43 Shield RMS/RMSc Slide, 8G199M74 . 234.99 #078-200-002 RMR Slide for Gen3 Glock® 19, BLK, #078-000-516 Win Slide for Gen3 Glock® 34, 8G232B04 . 272.99 • 12 oz. wt. #078-000-453 G43 Blank Slide, 8G159L99 . 178.99 8G201H44 . 236.99 078-000-580 ACRO Window Slide Gen3 Glock® 19, Window models have a cutout up front on top that reduces weight 078-000-587 G48 Slide w/"Iron Sight" Cuts, 8G169G99 . 199.99 BLK, 8G195A49 . 229.99 and enhances air flow to keep your barrel cool during long practice 078-000-588 G48 Window Slide w/"Iron Sight" Cuts, sessions - plus it gives your pistol a unique, futuristic flair. RMR mod- 8G178E49 . 209.99 #078-200-004 Window RMR Slide for Gen3 Glock® 19, els also have a pre-cut slot for neat, secure, integrated installation of 078-000-589 G48 RMS/RMSc Shield Slide, 8G195E49 . 229.99 BLK, 8G209B99 . 223.99 COVER PLATE FOR a Trijicon® RMR red dot sight (mounting screws for sight are even #078-000-494 Window RMR Slide for Gen3 Glock® 19, RMRCUT SLIDES included). Blank slide is unfinished, ready for the skilled gunsmith BRONZE, 8G206N54 . 242.99 (or metal worker) to cut slide serrations and other features exactly #078-000-496 Window RMR Slide for Gen3 Glock® 19, Fills the Slot When You Choose To Run as needed by you - or your customer.