ELEVATING DEVICES CODE ADOPTION DOCUMENT June 1, 2001 as amended Consolidated on January 4, 2013 The June 1, 2001 CAD as amended by: CAD Amendment 255-12 [Effective March 1, 2013] CAD Amendment 250-11 [Effective May 1, 2012] CAD Amendment 246-11 [Part 1,2,3,4,6,7 effective immediately, Part 5 effective October 1, 2011] A consolidation of: CAD Amendment 239/10 CAD Amendment 238/09 CAD Amendment 225/07-r3 CAD Amendment 216/07 CAD Amendment 213/07 CAD Amendment 212/07-r1 pages marked include errata and/or pending CAD revisions ELEVATING DEVICES CODE ADOPTION DOCUMENT Unofficial Consolidation Issued by: ELEVATING AND AMUSEMENT DEVICES SAFETY PROGRAM TECHNICAL STANDARDS AND SAFETY AUTHORITY FORWARD O.Reg. 209/01 Elevating Devices Regulation made under the Technical Standards and Safety Act adopts the Code Adoption Document (CAD) for the Province of Ontario. Definitions in the Code Adoption Document have the same meaning as O.Reg. 209/01 Elevating Devices Regulation made under the Technical Standards and Safety Act. The Code Adoption Document establishes essential requirements and minimum standards for the design; construction; installation; erection, maintenance, alteration to elevating devices. This unofficial consolidation is a collection of CAD amendments. On April 15, 2011, TSSA published CAD Amendment 246/11 which consolidated the requirements of CAD Amendments 239/10, 238/09, 225/07-r3, 216/07, 213/07, 212/07-r1. Effective April 15, 2011: Parts I, II, III, IV, VI, and VII of the Elevating Devices CAD are revoked and replaced with Parts 1, 2, 3, 4, 6, 7. Effective October 1, 2011: Part V of the Elevating Devices CAD is revoked and replaced with Part 5. On November 1, 2011, TSSA published CAD Amendment 250/11 which revised Part 3 in its entirety and supplemented Parts 1 and Parts 2 with minor additions. Effective on May 1, 2012: Part 3 of the Elevating Devices CAD [CAD Amendment 246/11] is revoked and replaced with a new Part 3 [CAD Amendment 250/11]. The supplemental additions to Parts 1 and 2 are also effective on this day. Note: Part 3 contains requirements which are deferred by an additional 1 to 3 years. On September 14, 2012, TSSA published CAD Amendment 255/12 which made revisions to Part 6 Construction Hoists. Effective on March 1, 2013: Part 6 of the Elevating Devices CAD is supplemented with requirements 6.11 through 6.19 [CAD Amendment 255/12]. For more information you may contact: Technical Standards and Safety Authority Elevating and Amusement Devices Safety Program 3300 Bloor Street West, 14th Floor, Centre Tower Toronto ON M8X 2X4 Tel: 416.734.3300 Fax: 416.231.5435 e-mail: [email protected] Unofficial Consolidation - Elevating Devices CAD - January 4 2013.doc i Table of Contents Part 1 ............................................................................................................................................................................. 1 1 GENERAL .............................................................................................................................................. 1 1.1 Definitions ........................................................................................................................................... 1 1.2 Exceptions .......................................................................................................................................... 1 Part 2 ............................................................................................................................................................................. 3 2 GENERAL TECHNICAL REQUIREMENTS ........................................................................................... 3 2.1 Welding ............................................................................................................................................... 3 2.2 Electrical ............................................................................................................................................. 3 2.3 Rope Clips .......................................................................................................................................... 3 2.4 Rope Replacement (17/84)(122/95) ................................................................................................... 4 2.5 Relocation of an Elevating Device ...................................................................................................... 4 2.6 Alteration ............................................................................................................................................. 4 2.7 Rack and Pinion Safeties [CAD Amendment 213-07] ............................................................................ 5 2.8 Format of Submission Documents ...................................................................................................... 5 2.9 Hydraulic Elevating Device Oil Loss Monitoring Program [CAD Amendment 212-07-r1] ...................... 6 2.10 Proper Use of Jumpers (Elevator Industry Field Employees’ Safety Handbook) (01/82) .................. 8 2.11 Component Fastenings (10/84) (36/86) (125/96)(193/05) .................................................................. 8 2.12 Passage Across Roofs (231/08) ......................................................................................................... 8 Part 3 [CAD Amendment 250-11] ..................................................................................................................................... 9 3 ELEVATORS, DUMBWAITERS, ESCALATORS, MOVING WALKS, MATERIAL LIFTS AND FREIGHT PLATFORM LIFTS ......................................................................................................................................... 9 3.1 Applied Codes and Standards [CAD Amendment 250-11] ................................................................... 9 3.2 Performance Based Safety Code ..................................................................................................... 15 3.3 Maintenance, Repair, Replacement, and Testing ............................................................................ 15 3.4 Alterations ......................................................................................................................................... 47 3.5 Rated Load ....................................................................................................................................... 77 3.6 Rope Clips ........................................................................................................................................ 78 3.7 Access to Machine Rooms and Spaces ........................................................................................... 78 3.8 Requirements for Existing Passenger and Freight Elevators (245/10) (173/02) ............................... 78 3.9 Requirements for Existing Dumbwaiters or Freight Platform Lifts .................................................... 78 3.10 Platform Apron Requirements (166/01) [* corrected in the unofficial consolidation only] ............... 78 3.11 Door Safety Retainers for Single Slide Doors (61/88, 97/92,109/93) ............................................... 79 3.12 Low Pressure Switch (160/01) .......................................................................................................... 79 3.13 Hoarding Between Hoistways Required [*correction and pending revision - shown in the unofficial consolidation only] ....................................................................................................................................... 79 3.14 Installation Number ........................................................................................................................... 80 3.15 Attendant Operation .......................................................................................................................... 80 3.16 Persons Permitted to Ride [*correction shown in the unofficial consolidation only] ......................... 80 3.17 Escalator Caution Signs ................................................................................................................... 80 3.18 Repositioning of an Escalator ........................................................................................................... 80 3.19 Escalator Brake Setting Data (85/91) [*correction shown in the unofficial consolidation only] ........ 81 3.20 Fire Code Retrofits (60/88, 105/93, 127/96, 149/99, 219/07) ........................................................... 81 Part 4 ........................................................................................................................................................................... 82 4 MANLIFTS ............................................................................................................................................ 82 4.1 Applied Code (174/02) ...................................................................................................................... 82 4.2 Top of Car Requirements for Power Type Manlift ............................................................................ 82 ii Unofficial Consolidation - Elevating Devices CAD - January 4 2013.doc 4.3 Inspection and Testing of Safety Brake ............................................................................................ 82 4.4 Authorized Persons........................................................................................................................... 82 4.5 Maintenance Log