Instructions on how to connect your mobile phone via Bluetooth® using the pairing feature of the Mercedes-Benz hands-free system. (All examples shown are using the Comand system) Please follow the steps below to connect your mobile phone (Motorola RAZR V3xx) with the mobile phone application of your Mercedes-Benz hands-free system using Bluetooth®. For a connection between your mobile phone and your Mercedes-Benz hands-free system to be successful Bluetooth® must be turned on in your mobile phone and the mobile shall be visible. Please make sure to also read the operating and pairing instructions of the mobile phone. Step 1 (to be performed on your Motorola RAZR V3xx) From the main screen of your mobile phone, 1. Select menu. 2. Select "Settings." 3. Select "Connection." 4. Select "Bluetooth® Link." 5. Select "Setup" and if power is off change to on. 6. Select "Back" to go back to the previous menu "Bluetooth® Link." 7. Select "Find me." Please note that your mobile phone will only be visible for a limited amount of time (approximately 3 minutes). During this time the pairing process must be started on the Mercedes-Benz hands-free system. Step 2 To get to the telephone screen of your Mercedes-Benz hands-free system press the “TEL” key on the radio or select Phone. Step 3 Select the "Phone" application located in the lower left corner. Seite 1 von 4 Step 4 Select "Bluetooth Phones" out of the list. Step 5 Select the "Update" function. Step 6 The system will now search for any Bluetooth® compatible phones which does support HFP. This may need some time depending on how many devices are found by the system. Step 7 Once the system completes searching select your mobile phone (example "My phone") from the list. Seite 2 von 4 Step 8 To connect your mobile phone to your Mercedes-Benz hands-free system enter a unique 1 to 16 digit passcode (password) using the Mercedes-Benz hands-free system. To guarantee a successful Bluetooth® connection it is recommended that at least a 4 digit passcode (password) is used. Select "Ok" to confirm. To complete the connection process follow the steps below and enter the passcode (password) previously entered in step 9 on the keypad of your mobile phone. Step 9 (to be performed on your Motorola RAZR V3xx) 1. "Bond With MB Bluetooth®?" will be shown in your mobile phone. 2. Select "Yes." 3. "Enter Bluetooth® PIN" will be shown. 4. Please enter your passkey. This passkey must be identical to the passkey you entered in the Mercedes-Benz hands-free system. 5. Confirm the passkey by selecting "OK." 6. "Verifying PIN… / Please Wait" will be shown. 7. "Completed / PIN Verified & Saved" will be shown. 8. "Handsfree Voice Getaway / Requested by: MB Bluetooth®" will be shown. 9. Select "Grant." 10. "Connected: MB Bluetooth®" will be shown. 11. Select the "End" key to switch back to the telephone main screen. Seite 3 von 4 Step 10 If the authorization was successful a PopUp appears on your Mercedes-Benz hands-free system. Step 11 After your mobile phone is successfully connected via Bluetooth® to your Mercedes-Benz hands-free system the name of your mobile (example "My Phone") phone will be displayed in the lower left corner above the “Phone” icon. Seite 4 von 4.