Ministry of Science and Higher Education of the Russian Federation Federal State Budgetary Educational Institution of Higher Education Nosov Magnitogorsk State Technical University Proceedings of the 5th International Youth Scientific and Technical Conference Edited by A.G. Korchunov The Conference was funded by the Federal State Budgetary Institution Russian Foundation for Basic Research (Contract No. 20-08-20004\20 dated 17.02.2020) Magnitogorsk 2020 Editorial Board: Korchunov A.G. (Editor-in-Chief) Konstantinov D.V. (Deputy Editor-in-Chief) Ivekeeva P.V. (Publishing Editor) Medvedeva E.M. The proceedings of the conference are indexed by the Russian Science Citation Index and Google Scholar Magnitogorsk Rolling Practice 2020: Proceedings of the 5th Internation- al Youth Scientific and Technical Conference. Ed. by A.G. Korchunov. Mag- nitogorsk: Publishing House of Nosov Magnitogorsk State Technical Universi- ty, 2020, 145 p. ISBN 978-5-9967-2113-9 These scientific publications constitute the proceedings of the 5th International Youth Scientific and Technical Conference «Magnitogorsk Rolling Practice 2020» devoted to metal and alloy forming. Subjects of the reports delivered by young researchers show a considerable interest in research areas related to development of finite element models of metal and alloy forming processes using special software, innovative cold and hot plastic working pro- cesses, new materials with a higher level of performance, methods used to determine true resistance of metals and alloys to deformation, and physical simulation of metal and alloy forming processes. The Conference had a title of the winner of the competition held by the Russian Foundation for Basic Research for the best projects of organizing scientific events in the Russian Federation in 2020. ISBN 978-5-9967-2113-9 © Nosov Magnitogorsk State Technical University, 2020 Министерство науки и высшего образования Российской Федерации Федеральное государственное бюджетное образовательное учреждение высшего образования «Магнитогорский государственный технический университет им. Г.И. Носова» Материалы V международной молодежной научно-технической конференции Под редакцией А.Г. Корчунова Конференция проводится при финансовой поддержке ФГБУ «Российский фонд фундаментальных исследований» (Договор № 20-08-20004\20 от 17.02.2020) Магнитогорск 2020 Редколлегия: Корчунов А.Г. (главный редактор) Константинов Д.В. (зам. главного редактора) Ивекеева П.В. (отв. редактор) Медведева Е.М. Материалы трудов конференции индексируются Российским индексом научного цитирования и Google Scholar Magnitogorsk Rolling Practice 2020: материалы V международной молодежной научно-технической конференции / под ред. А.Г. Корчунова. Магнитогорск: Изд-во Магнитогорск. гос. техн. ун-та им. Г.И. Носова, 2020. 145 c. ISBN 978-5-9967-2113-9 Представлены материалы докладов V международной молодежной научно- технической конференции «Magnitogorsk Rolling Practice 2020», посвященной вопросам обработки металлов и сплавов давлением. Тематика докладов молодых ученых свидетельствует о существенном инте- ресе к научным направлениям, связанных с разработкой конечно-элементных моделей процессов обработки металлов и сплавов давлением в специализирован- ных программных комплексах, инновационных процессов холодной и горячей пластической обработки, новых материалов с повышенным уровнем эксплуата- ционных характеристик, методик определения истинного сопротивления метал- лов и сплавов деформации, физического моделирования процессов обработки металлов и сплавов давлением. Конференция проводилась в статусе победителя конкурса Российского фонда фундаментальных исследований на лучшие проекты организации научных меро- приятий на территории Российской Федерации в 2020 г. ISBN 978-5-9967-2113-9 © Магнитогорский государственный технический университет им. Г.И. Носова, 2020 MAGNITOGORSK ROLLING PRACTICE 2020: OUTCOMES AND PROSPECTS Korchunov A.G. Nosov Magnitogorsk State Technical University In November of 2020 NMSTU held the 5th anniversary International Youth Sci- entific and Technical Conference Magnitogorsk Rolling Practice 2020 devoted to met- al and alloy forming. In 2014 scientists of Nosov Magnitogorsk State Technical Uni- versity introduced the initiative of holding the international youth forum devoted to basic and applied issues of metal and alloy forming [1]. The idea of organizing the youth scientific and practical conference received an encouraging response from re- searchers, specialists and students. Relevance of subjects of the conference is proved by a geographic growth of participants and its constant support by the Russian Foundation for Basic Research (RFBR)*. Plenary sessions for different years of the conference included reports given by leading scientists: T.G. Langdon, J.M. Cabrera Marrero, P. Tandon, M. Dabala, Hailiang Yu, I. Calliari, G.I. Raab, A. Zhilyaev, A.M. Glezer, V.N. Trofimov, A.V. Vydrin, E. Korznikova, and A. Pesin. Many young researchers present- ed their research results at previous conferences prepared and successfully defended their theses and got PhD in engineering. Communications as part of the conference gave an impetus to strengthening collaboration between young researchers of leading research schools, building new research teams capable of achieving the most challeng- ing objectives [2-3]. This year the Conference had a title of the winner of the competition held by the Russian Foundation for Basic Research for the best projects of organizing scientific events in the Russian Federation. In view of the current epidemiological situation, the Organizing Committee of the Conference decided to hold an online conference (Fig.1). Fig.1. E-conference Magnitogorsk Rolling Practice 2020 3 The conference program included reports delivered by young researchers in sessions “Innovative technology and materials in metal forming”, “Cross-disciplinary solutions in advanced materials engineering (iSmart-MetalForming)” and “Fundamen- tal challenges of metal forming in the scope of current demands of the global industry”, the workshop on “Basics of finite element modeling in Abaqus” and individual consul- tations on the difficulties of research for young researchers. Over 100 participants from 32 universities, industrial companies and research institutions took part in the virtual conference sessions. Total online time of the confer- ence exceeded 20 hours. The information partners of the Conference included journals, such as FER- ROUS METALLURGY. Bulletin of Scientific, Technical and Economical Information, Ferrous Metals, CIS Iron and Steel Review, Vestnik of Nosov Magnitogorsk State Tech- nical University, Theory and Technology of Metallurgical Production, and Mechanical Equipment of Metallurgical Plants. The conference participants were welcomed by the members of the Program Committee: Puneet Tandon, Indian Institute of Information Technology, Design and Manufacturing (Jabalpur, India), Irene Calliari, the University of Padua (Padua, Italy), and Megumi Kawasaki, Oregon State University (the USA). They emphasized in their speeches the importance of holding the conference in such a complicated epidemiological situation, a good opportunity for young researchers from various research schools to share their experience and knowledge, promoting the development of prospective research areas. They put a particular emphasis on giving reports in English to take an active part in international conferences of the highest level. In spite of rather an unconventional online format and a young age of speakers, their reports had a high scientific level, and speakers wanted to present their research results as clearly and attractively as possible and showed themselves to be quite mature researchers capable of solving complicated issues in metal and alloy forming. Subjects of the reports made by young researchers show that there is a current interest in research areas related to developing: –finite element models of metal and alloy forming processes using special software: DEFORM 3D, Abaqus and others, –innovative cold and hot metal forming processes, –new materials with a higher level of performance properties, –new methods used to determine true resistance of metals and alloys to defor- mation, and –physical simulation of metal and alloy forming processes. Thus, we may state a great commitment of young researchers, specialists, stu- dents and postgraduate students to development and introduction of innovative research products, having a basic and applied value for developing potential of the metal and alloy forming industry, its expansion and diversification, contributing to a successful settlement of production issues in an efficient relationship between science and the industry. Following the results of the sessions, the committee determined nominees, di- ploma and prize winners of the conference. The nomination “The best start to science” was awarded to three young re- searchers: Nikita Bunits (Moscow Institute of Steel and Alloys, Moscow), Alexandra 4 Tymchenko (Karaganda State Industrial University, Temirtau, Kazakhstan), and Ilya Tsyrganovich (the Sukhoi State Technical University of Gomel, Gomel, Belarus). The nomination “The best progress in research” was awarded to Ekaterina Ustinova (Ural Federal University, Yekaterinburg, Russia). The nomination “The best practical imple- mentation” was awarded to Denis Voroshilov (Siberian Federal University, Krasno- yarsk). The nomination “The best numerical simulation” was awarded to Denis Salikhyanov (Ural Federal University, Yekaterinburg).