Sr. I. No. 20.Pmd

Sr. I. No. 20.Pmd

Reg. No. G-2/RNP/GOA/32/2018-2020 RNI No. GOAENG/2002/6410 Panaji, 13th August, 2020 (Sravana 22, 1942) SERIES I No. 20 PUBLISHED BY AUTHORITY NOTE There is one Supplement and an Extraordinary issue to the Official Gazette, Series I No. 19 dated 06-08-2020, namely:— (1) Supplement dated 10-08-2020 from pages 577 to 674, from Goa Legislature Secretariat regarding Bills. (2) Extraordinary dated 11-08-2020 from pages 675 to 694 from Department of Finance (R&C) Notifications regarding G.S.T. Rules. INDEX Department Order/Notification Subject Pages 1.a. Labour Not.- 24/12/2020-LAB/899 Identity Card to be in Smart Card form. 695 Secretary b. Insp. of Factories & Not.- VI/FAC-6(L-1)Part-1/ Draft Rules — The Goa Factories 696 Boilers /IFB-2020/1031 (Fifteenth Amendment) Rules, 2020. Chief Insp. & ex officio Jt. Secretary 2. Panchayati Raj & Ord.- 15/23/DP/EST/ Creation of post. 703 Community Development /CREATION/2019/5257 Director 3. Revenue Ord.- 17/1/Fixation of Land Minimum Land Rates. 704 Under Secretary Rates/2012-RD/6850 4. Transport Not.- D.Tpt/STA/2375/Part The Goa Motor Vehicles 721 Dir. & ex off. Addl. Secy. File/2019/1855 (Amendment) Rules, 2020. GOVERNMENT OF GOA authority shall be in the form of a Smart Card and it’s size shall be 8 c.m. x 5c.m. with Department of Labour photograph, Date of Birth, Gender and Blood ___ Group printed on Smart Card and other particulars of the workman in electronic chip Notification storing the following details of the workman, 24/12/2020-LAB/899 namely:— In pursuance to section 4 read with (1) First Name. sub-section (2) of section 3 of the Goa Employment (Conditions of Service) and (2) Middle Name. Retirement Benefit Act, 2001 (Goa Act 35 of (3) Last Name. 2001) and in supersession of the Government 4 Notification No. 24/44/2018-LAB/13 dated ( ) Gender (M/F/T). 02-01-2019, published in the Official Gazette, (5) Date of Birth (DD-MM-YYYY). Series I No. 41, dated 10th January, 2019, the (6) Email ID (optional). Government of Goa hereby notifies that the identity card to be issued by the competent (7) Mobile number/Landline number. 695 Suggestions are welcomed on e-mail: dir–[email protected] OFFICIAL GAZETTE — GOVT. OF GOA SERIES I No. 20 13TH AUGUST, 2020 (8) Marital Status (Married/unmarried). the said Act, for information of all the persons likely to be affected thereby and notice is (9) Number of Years Residing in Goa. hereby given that the said draft Rules will be (10) State Domicile Status (Goan/Non Goan). taken into consideration by the Government after the expiry of a period of forty-five days (11) Name as on Aadhaar Card. from the date of publication of this Notification (12) Aadhaar Number (issued by Unique in the Official Gazette. Identification Authority of India). All objections and suggestions to the said (13) Highest Educational Qualification. draft Rules may be forwarded to the Secretary (Factories and Boilers), Government of Goa, (14) Permanent Address details such as Secretariat, Porvorim, before the expiry of the State, District, Taluka, Village, City said period of forty-five days so that they may alongwith Pin Code. be taken into consideration at the time of (15) Present Address details such as State, finalization of the said draft Rules. District, Taluka, Village, City alongwith Pin Code. DRAFT RULES (16) Employment Type. In exercise of the powers conferred by section 112 of the Factories Act, 1948 (Central (17) Designation. Act No. 63 of 1948) and all other powers (18) PF No. (Optional). enabling it in this behalf, the Government of Goa hereby makes the following rules so as (19) ESI No. (Optional). to further amend the Goa Factories Rules, (20) Gross Salary. 1985, namely:— (21) Total Experience (Years, Months). 1. Short title and commencement.— (1) (22) Blood Group. These rules may be called the Goa Factories (Fifteenth Amendment) Rules, 2020. This Notification shall come into force with immediate effect. (2) They shall come into force on the date of their publication in the Official Gazette. By order and in the name of Governor of Goa. 2. Amendment of rule 2A.— In rule 2A of the Goa Factories Rules, 1985 (hereinafter Sanjay Kumar, I.A.S., Secretary (Labour). referred to as the “principal Rules”),— Porvorim, 5th August, 2020. (i) in sub-rule (3), for the words “ten ———t——— thousand rupees”, the words “twenty thousand rupees” shall be substituted; Inspectorate of Factories and Boilers ___ (ii) in the Schedule,— Notification (a) against serial number 1, in column VI/FAC-6(L-1)Part-1/IFB-2020/1031 5, the following expression shall be The following draft Rules which the inserted, namely:— Government of Goa proposes to make in exercise of the powers conferred by section “Instruments such as Digital 112 of the Factories Act, 1948 (Central Act Rebound Hammer, Ultrasonic No. 63 of 1948) so as to further amend the Thickness Gauge, Ultrasonic Pulse Goa Factories Rules, 1985, are hereby Velocity Meter, Half Cell Potentiometer, pre-published as required by section 115 of Rebar Locator, Dye Penetration Test Kit 696 OFFICIAL GAZETTE — GOVT. OF GOA SERIES I No. 20 13TH AUGUST, 2020 and any other equipment or device as (f) “Instruments such as Stack Velocity may be recommended by the Chief Meter, Anemometer, Manometer, Pitot Inspector to determine the safety of Tube and any other equipment or device the building/shed/structure/work of as may be recommended by the Chief engineering construction.”; Inspector to determine the efficiency and effectiveness of the system or the (b) against serial number 3, in column appliance.”; 5, for the existing entry, the following entry shall be substituted, namely:— 3. Amendment of rule 3.— In rule 3 of the principal Rules, in sub-rule (1),— “Instruments such as Vernier Calliper, Level Gauges, Ultrasonic (i) for clause (d), the following clause Thickness Gauge with normal and hot shall be substituted, namely:— probe, Tensometer/Spring Balancer “(d) Where any flammable or non- and any other equipment or device as flammable or toxic or non-toxic may be recommended by the Chief compressed gas or petroleum product Inspector to determine the safe or any other inflammable substance is working condition of the Hoists and intended to be possessed in a cylinder Lifts.”; or a vessel or a tank in any factory, application for permission shall also be (c) against serial number 4, in column accompanied by an approval/license, if 5, for the existing entry, the following applicable, as required under the Gas entry shall be substituted, namely:— Cylinders Rules, 2016 or the Static and “Instruments such as Vernier Mobile Pressure Vessels (Unfired) Rules, 2016 or the Petroleum Rules, 2002 or the Calliper, Level Gauges, Ultrasonic Inflammable Substances Act, 1952 (Act Thickness Gauge with normal and hot No. 20 of 1952), as the case may be, as probe, Tensometer/Spring Balancer amended from time to time, from the and any other equipment or device as authority concerned.”; may be recommended by the Chief Inspector to determine the safe (ii) in clause (e),— working condition of the Lifting Machinery and Lifting Tackles.”; (a) for the expression “one thousand rupees”, the expression “two thousand (d) against serial number 5, in column rupees” shall be substituted; 5, for the existing entry, the following entry shall be substituted, namely:— (b) the following explanation shall be inserted, namely:— “Instruments such as Vernier Calliper, Level Gauges, Ultrasonic “Explanation: In respect of application Thickness Gauge with normal and hot made through online mode, fees shall be probe, calibrated pressure gauges, paid through e-challan payment hydraulic pump and any other gateway.”. equipment or device as may be recommended by the Chief Inspector 4. Amendment of rule 4.— In rule 4 of the to determine the safety in the use of principal Rules, in the Explanation after pressure plant.”; clause (c), the following clause shall be inserted, namely:— (e) against serial number 7, in column 5, for the existing entry, the following “(d) existing building/shed/structure/ entry shall be substituted, namely:— work of engineering construction is in 697 OFFICIAL GAZETTE — GOVT. OF GOA SERIES I No. 20 13TH AUGUST, 2020 accordance with the plans approved by the defects, if any, and assessment of defects Chief Inspector.”. for probable cause. 5. Amendment of rule 5.— In rule 5 of the TABLE principal Rules, after the existing proviso, the Building/Shed Name: following proviso shall be inserted, namely:— Discrepancy/ Structural Location Remarks “Provided further that no manufacturing Observations Member process(es) shall be carried out in any Cracks building/shed/structure which consist of any type of lifting tools or lifting machines Spalls mounted on it for the purpose of lifting and Honeycomb /or movement of load, unless a Certificate Exposed of Stability is obtained from the competent reinforcement person for the said building/shed/structure. Before issuing such Certificate of Stability, Settlement the competent person shall conduct Sagging thorough structural analysis so as to Buckling ascertain load bearing capacity by taking Corrosion into account the safe working load to be Out of plumb lifted and/or moved. Fresh Certificate of Stability shall be obtained from the Other competent person in case there is any addition or modification to lifting tools or (c) Non-destructive testing:— (i) lifting machines so mounted.”. Concrete members – Non-destructive test for Assessment of concrete strength by Insertion of new rule 5A 6. .— After rule 5 Digital Rebound Hammer and Quality of of the principal Rules, the following rule shall concrete by ultrasonic test, at about 4 be inserted, namely:— critical locations, per building (as a “5A.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    28 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us