RP-D10 SERIES THERMAL PRINTER TECHNICAL REFERENCE U00131406604 U00131406600 November 2013 U00131406601 June 2014 U00131406602 October 2014 U00131406603 May 2015 U00131406604 August 2015 Copyright © 2013-2015 by Seiko Instruments Inc. All rights reserved. Seiko Instruments Inc. (hereinafter referred to as "SII") has prepared this manual for use by SII personnel, licensees, and customers. The information contained herein is the property of SII and shall not be reproduced in whole or in part without the prior written approval of SII. SII reserves the right to make changes without notice to the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical, arithmetic, or listing errors. Bluetooth® is registered trademarks of Bluetooth SIG, Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. All other trademarks are the properties of their respective companies. is a trademark of Seiko Instruments Inc. PREFACE This technical reference describes about RP-D10 SERIES THERMAL PRINTER (hereinafter referred to as "printer"). See USER'S GUIDE in the CD-ROM packed with the printer for operation. [Product Name] RP-D10-K 27J1-U 1C3 (1) (2) (3) (4) (1) : Case Color W: White / K: Black (2) : Body Code 27J1: For standard model / 27J2: For Bluetooth model (3) : Interface S: Serial / U: USB / E: Ethernet / 1: USB + Serial / B: Bluetooth (4) : Optional Package Code Contact us for details. The printer complies with EU RoHS Directive (2011/65/EU). PREFACE-1 [Contents] CHAPTER 1 TERMS USED IN THIS MANUAL • This chapter describes the basic terms that are frequently used in this manual. CHAPTER 2 SPECIFICATIONS • This chapter describes specifications of the printer and the thermal paper. CHAPTER 3 INTERFACE • This chapter describes specification of the interface ports. CHAPTER 4 FUNCTION SETTING • This chapter describes the Function Setting and test prints. CHAPTER 5 LED DISPLAY AND SWITCH FUNCTION • This chapter describes the printer status by LED display and functions of switches. CHAPTER 6 COMMAND FUNCTIONS • This chapter describes the function of commands supported by the printer. CHAPTER 7 INITIALIZATION • This chapter describes the initialization. APPENDIX A CHARACTER SETS (CHARACTER CODE TABLE) PREFACE-2 TABLE OF CONTENTS CHAPTER 1 TERMS USED IN THIS MANUAL CHAPTER 2 SPECIFICATIONS 2.1 PRINTER SPECIFICATIONS ................................................................................... 2-1 2.1.1 Applicable Standards ............................................................................... 2-3 2.1.2 Precautions For Use ................................................................................ 2-4 2.1.3 Dimensions .............................................................................................. 2-6 2.1.4 Thermal Paper Specifications .................................................................. 2-7 2.1.5 Printing Area ............................................................................................ 2-9 2.2 CUTTER SPECIFICATIONS .................................................................................. 2-10 2.3 POWER SUPPLY SPECIFICATIONS .................................................................... 2-11 2.4 DRAWER KICK PORT SPECIFICATIONS ............................................................ 2-12 2.5 COMMUNICATION CABLE SPECIFICATIONS ..................................................... 2-13 2.5.1 Specified USB Cable Specifications ...................................................... 2-13 2.5.2 Specified Powered USB Cable Specifications ....................................... 2-14 2.5.3 Specified Serial Cable Specifications .................................................... 2-15 CHAPTER 3 INTERFACE 3.1 USB MODEL ............................................................................................................. 3-1 3.1.1 USB Interface .......................................................................................... 3-1 3.2 SERIAL MODEL ........................................................................................................ 3-4 3.2.1 Serial Interface......................................................................................... 3-4 3.3 USB + SERIAL MODEL .......................................................................................... 3-12 3.3.1 USB Interface ........................................................................................ 3-12 3.3.2 Serial Interface....................................................................................... 3-12 3.4 ETHERNET MODEL ............................................................................................... 3-24 3.4.1 Ethernet Interface .................................................................................. 3-24 3.5 BLUETOOTH MODEL ............................................................................................ 3-27 3.5.1 Bluetooth Interface................................................................................. 3-27 3.5.2 Precautions for Use Bluetooth and Bluetooth Data Transmission ........ 3-28 CHAPTER 4 FUNCTION SETTING 4.1 FUNCTION SETTING METHOD .............................................................................. 4-1 4.1.1 Changing DS ........................................................................................... 4-2 4.1.2 Changing Memory Switch ........................................................................ 4-5 4.2 TEST PRINT ........................................................................................................... 4-22 TOC-1 CHAPTER 5 LED DISPLAY AND SWITCH FUNCTION 5.1 PRINTER STATUS LED DISPLAY ........................................................................... 5-1 5.2 ERROR AND RECOVERY PROCEDURE ............................................................... 5-3 5.3 SWITCH .................................................................................................................... 5-4 5.3.1 POWER Switch ....................................................................................... 5-4 5.3.2 FEED Switch ............................................................................................ 5-4 CHAPTER 6 COMMAND FUNCTIONS 6.1 CHARACTER CODES AND COMMANDS ............................................................... 6-1 6.1.1 JIS Code System ..................................................................................... 6-1 6.1.2 Shift JIS Code System ............................................................................. 6-3 6.2 FLASH MEMORY ..................................................................................................... 6-4 6.3 STANDARD MODE AND PAGE MODE ................................................................. 6-10 6.3.1 Standard Mode ...................................................................................... 6-10 6.3.2 Page Mode ............................................................................................ 6-10 6.4 RESPONSE DATA.................................................................................................. 6-14 6.5 FUNCTION CODE DESCRIPTION ........................................................................ 6-16 6.5.1 Printing Command ................................................................................. 6-17 6.5.2 Line Spacing .......................................................................................... 6-20 6.5.3 Character Set......................................................................................... 6-21 6.5.4 Print Position .......................................................................................... 6-34 6.5.5 Image ..................................................................................................... 6-45 6.5.6 Macro ..................................................................................................... 6-58 6.5.7 Barcode ................................................................................................. 6-60 6.5.8 Two-dimensional Barcode ..................................................................... 6-69 6.5.9 Kanji ....................................................................................................... 6-73 6.5.10 Auxiliary Functions ................................................................................. 6-79 6.5.11 Ruled Line ............................................................................................ 6-103 6.5.12 Download Mode ................................................................................... 6-107 6.5.13 Tag Processing Mode .......................................................................... 6-111 6.6 COMMAND LIST .................................................................................................. 6-124 CHAPTER 7 INITIALIZATION 7.1 INITIALIZATION ........................................................................................................ 7-1 APPENDIX A CHARACTER SETS (CHARACTER CODE TABLE) A.1 CHARACTER CODE TABLE (CODEPAGE) ............................................................ A-1 A.2 INTERNATIONAL CHARACTER SET ...................................................................... A-9 A.3 2-BYTE CHARACTER ............................................................................................ A-10 TOC-2 FIGURES Figure 1-1