Tools & Equipment N-23 Multi-Purpose Saw Blades APB BLADE SERIES GPL BLADE SERIES “TIGER TOOTH“ SUPER GRIT DIAMOND "THE LIEUTENANT" GENERAL PURPOSE BLADE DIAMOND BLADE • Cuts PVC, plastic, ductile, cast, and HDPE pipe—cuts • Cuts a combination of products: Concrete, asphalt, virtually anything! block and brick. • Can be used on hand-held saws and chop saws. • For use in non-critical applications (i.e.: states without • Cuts twice as fast as an abrasive wheel. super-hard concrete). • Cuts 150 pieces of 8" diameter ductile iron. Safer than • Laser welded segments for durability. abrasive wheels—won't break apart. • Will cut approximately 4000 inch-feet of concrete or • Has abrasive “side burns” for providing additional relief 3750 inch-feet of asphalt. Can be used on hand-held for faster cutting. high speed and low horsepower (20 hp or less) walk- behind saws. • 1" arbor with 20mm bushing standard. • Can be used wet or dry • Available in six (6) sizes – 4", 4.5", 7", 8", 12", and 14". • 1" arbor with 20mm bushing and drive pin hole standard. • Available in three (3) sizes - 12", 14", and 16". EPB BLADE SERIES STA BLADE SERIES "PIPE PIRANHA" - SUPREME ELECTRO- PLATED DIAMOND BLADE PREMIUM CONCRETE DIAMOND BLADE • Used to cut ductile iron and plastic pipe. • Will cut reinforced concrete and concrete pipe. • Cuts 50 – 60 pieces of 8" ductile iron pipe. • Turbo segment for fast and smooth cutting. • Safer, faster and more economical than abrasive • Will cut approximately 6000 inch-feet of concrete. wheels. • Can be used on high-speed and low horsepower (20 • May be used on hand-held saws and chop saws. Laser- hp or less) walk-behind saws. Laser welded segments welded segments for durability. for durability. • Has electroplated “side burns” for beveling the cut end • Can be used wet or dry. N of pipe. • 1" arbor with 20mm bushing and drive pin hole standard. • 1" arbor with 20mm bushing standard. • Available in 12", 14", 16", 18", and 20" diameters. • Available in three (3) sizes – 12", 14", and 16". DAS BLADE SERIES GPS BLADE SERIES PREMIUM ASPHALT DIAMOND BLADE “THE GENERAL” PREMIUM GENERAL • Will cut asphalt, asphalt over concrete and green PURPOSE DIAMOND BLADE concrete. • Cuts a combination of products: Concrete, asphalt, • Undercut protection on blade center core for long life block and brick. in asphalt. • Has “drop” segments for undercut protection. • Will cut approximately 8,000 inch-feet of asphalt. • Laser welded segments for durability. • Can be used wet or dry. Can be used on hand-held high speed • Will cut approximately 4000 inch-feet of concrete or and low horsepower (20 hp or less) walk-behind saws. 5000 inch-feet of asphalt. Can be used on hand-held • 1" arbor with 20mm bushing and drive pin hole standard. high speed and low horsepower (20 hp or less) walk- • Available in three (3) sizes - 12", 14" and 16". behind saws. • Can be used wet or dry. • 1" arbor with 20mm bushing and drive pin hole standard . • Available in three (3) sizes - 12", 14", and 16". Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637 www.ejprescott.com N-23 Tools & Equipment N-24 Saw Blades “Pipe Piranha” Electroplated Diamond Blades Applications: ductile iron, Plastic Pipe and Concrete (Recommended for: Hand-held saws and Chop saws) Part NO. DESCRIPTION Product NUMBER EPB12125 12 x 125 x 1-20 mm Supreme Ductile Iron Blade 86585 EPB14125 14 x 125 x 1-20 mm Supreme Ductile Iron Blade 86585 1 EPB16125 16 x 125 x 1-20 mm Supreme Ductile Iron Blade 86585 2 Premium “Tiger Tooth” Diamond Blades Applications: Steel or Concrete Pipe, Ductile Iron, Cast Iron, PVC, HDPE, Reinforced Concrete, Angle Iron, Rebar and Threaded Rod (Recommended for: Hand-held saws and Chop saws) Part NO. DESCRIPTION Product NUMBER APB12125 12 x 125 x 1-20 mm Premium Tiger Tooth Blade 86587 APB14125 14 x 125 x 1-20 mm Premium Tiger Tooth Blade 86587 1 APB16125 16 x 125 x 1-20 mm Premium Tiger Tooth Blade NS Premium Concrete Diamond Blades Applications: Concrete Pipe, Cured Concrete, Brick and Block (Recommended for: Hand-held saws, Chop saws and low horsepower saws) Part NO. DESCRIPTION Product NUMBER STA12125 12 x 125 x 1-20 mm Segmented Turbo Blade 86582 STA14125 14 x 125 x 1-20 mm Segmented Turbo Blade 86582 1 STA16125 16 x 125 x 1-20 mm Segmented Turbo Blade 86582 2 Premium Asphalt Diamond Blades Applications: Asphalt, Asphalt over Concrete and Green Concrete (Recommended for: Hand-held saws, Chop saws and low horsepower saws) Part NO. DESCRIPTION Product NUMBER DAS12125 12 x 125 x 1-20 mm Premium Dry Asphalt Blade 86583 DAS14125 14 x 125 x 1-20 mm Premium Dry Asphalt Blade 86583 1 DAS16125 16 x 125 x 1-20 mm Premium Dry Asphalt Blade NS “The General” Premium General Purpose Diamond Blades Applications: Asphalt, Cured Concrete, Green Concrete, Concrete Pipe, Brick, Block and Roof Tile (Recom- mended for: Hand-held saws, Chop saws and low horsepower saws) Part NO. DESCRIPTION Product NUMBER GPS12125 12 x 125 x 1-20 mm Super G Blade - “The General” 86581 GPS14125 14 x 125 x 1-20 mm Super G Blade - “The General” 86581 1 GPS16125 16 x 125 x 1-20 mm Super G Blade - “The General” 86581 2 “The Lieutenant” General Purpose Diamond Blades Applications: Asphalt, Cured Concrete, Green Concrete, Concrete Pipe, Brick, Block and Roof Tile (Recommended for: Hand-held saws, Chop saws and low horsepower saws) Part NO. DESCRIPTION Product NUMBER GPL12125 12 x 125 x 1 General Purpose Blade- “The Lieutenant” NS GPL14125 14 x 125 x 1 General Purpose Blade- "The Lieutenant” NS GPL16125 16 x 125 x 1 General Purpose Blade- “The Lieutenant” NS Diamond Blade Accessories Part NO. DESCRIPTION Product NUMBER BUSH0120375 1” to 20mm Diamond Blade Bushing NS N-24 Phone: 800-EJP-24HR (357-2447) • Fax: 207-582-5637 www.ejprescott.com.