565 Retreading Rasp Blades & Spacers | Retread Accessories Tire Appearance | Envelopes WARNING: For more information go to www.P65Warnings.ca.gov. WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE SUPPLY CORPORATION 566 RETREADING // RASP BLADES & SPACERS Rasp Blades PINCOTT® STANDARD SERIES Rasp Blades BUFFING RASP BLADES • Exclusive heat treating process • Reduced tooth breakage • Cooler running • Faster material removal and Spacers • No blade warpage • Lower cost per bu"ed tire PINCOTT® STANDARD SERIES BUFFING RASP BLADES R4 SERIES 28 Blades Progressive development of blades capable of higher Per Set rates of rubber removal and the use of more powerful and higher speed machines imposed increasingly severe R115, temperature conditions on rasp blades, giving rise to the 5 SEGMENTS need for effective cooling to avoid loss of temper in the SERIES 25 Blades Per Set blade material. P3, 6 SEGMENTS SERIES 30 Blades Per Set Allows cross ventilation and cleaning of cut rubber through the rasps head ASCOT NO. MFG. NO. DESCRIPTION 616-00320 PTP3-20 Fits All 11.5" 6-Segment Hubs 616-00325 PTP3-25 Fits All 11.5" 6-Segment Hubs 616-00416 PTR4 -16 Fits All 9" 4-Segment Hubs 616-00420 PTR4-20 Fits All 9" 4-Segment Hubs SINGLE SECTION 616-00425 PTR4-25 Fits All 9" 4-Segment Hubs 1/8", 5/32", 3/16" 616-11520 PTR115-20 Fits All 11.5" 5-Segment Hubs • Lower cost per bu"ed tire • Engineered by a company 616-11525 PTR115-25 Fist All 11.5" 5-Segment Hubs with over 65 years in the retreading industry • Designed Other sizes available for contoured hubs and use with smart blades to fit all U.S. and European bu#ng machines, manufactured with multiple stampings to allow interchangeability between two or three pin hubs • BENEFITS INCLUDE: reduced heat and smoke, cleaner bu"er, cooler running and faster bu#ng • 6 precision sizes • Heavy duty quality steel blade HOW TO ORDER BUFFING HUBS RETREADING // RASP BLADES & SPACERS • Cross ventilation • Special heat treatment for long life • INCREASES BLADE LIFE: Keeps blades running cooler, improves bu" texture and prevents premature blade breakage 1 Model/Make of Bu"er ASCOT NO. MFG. NO. DESCRIPTION 2 Arbor Hole Size 613-00414 R4S14DL 1/4" Double Keyway 613-00418 R4S18SL 1/8" Single 3 Size, if any 613-00438 R4S38DL 3/8" Double SPACERS FOR 9" 4-SEGMENT 4 613-04316 R4S316SL 3/16" Single Pin Length 613-04516 R4S516DL 5/16" Double Rasp Blade 613-04532 R4S532SL 5/32" Single 5 Type 613-00514 R5S14DL 1/4" Double Hub Type: 613-00518 R5S18SL 1/8" Single SPACERS FOR Non-Spiral, 613-00538 R5S38DL 3/8" Double 11.5" 5-SEGMENT 6 Heavy-Duty, 613-53165 R5S316SL 3/16" Single All Purpose or 613-00614 R6S14DL 1/4" Double Regular 613-00618 R6S18SL 1/8" Single 613-00638 R6S38DL 3/8" Double SPACERS FOR Saturn hub pictured 613-06316 R6S316SL 3/16" Single 11.5" 6-SEGMENT in Bandag setup with 613-06516 R6S516DL 5/16" Double 20 each R4S38DL and 4 each R4S316SL. 613-06532 R6S532SL 5/32" Single Available for contoured hubs BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION RASP BLADES & SPACERS // RETREADING 567 Rasp Blades PINCOTT® RASP BLADES - SMART SERIES • Manufactured with a unique sinusodial (wave-like) form which introduces a multidirectional cutting action • Wave-like form creates greater strength in the blade and its teeth • Cutting action produces less drag on the rasp motor, saving you energy FRONT VIEW 616-01155 SIDE VIEW RETREADING // RASP BLADES & SPACERS FRONT VIEW 616-00944 SIDE VIEW FRONT VIEW 616-01156 SIDE VIEW ASCOT NO. MFG. NO. DESCRIPTION 616-01155 Smart I Fits all 11.5", 5-Segmented Hubs 616-00944 Smart II Fits all 9", 4-Segmented Hubs 616-01156 Smart III Fits all 11.5", 6-Segmented Hubs Pincott Bandag Style Hub Model 408106 PINCOTT® RASP BLADES - ULTRA SERIES Pincott® Unique tooth setting to enhance the with multiple stampings to allow interchangeability strength of the between two or three pin hubs. Constant cutting teeth and produce angle which cooler cutting produces the • Exclusive heat treating Radial same surface Same width of process • Reduced tooth termination of finish for the tooth throughout entire life of the breakage Faster material slit to reduce • tooth breakage blade removal • Cooler Running • No blade warpage • Lower cost per bu"ed tire ASCOT NO. MFG. NO. DESCRIPTION 616-00111 Ultra I Fits All 11.5", 5-Segmented Hubs 616-00222 Ultra II Fits All 9", 4-Segmented Hubs 616-00333 Ultra III Fits All 11.5", Increased material between I.D. of blade and mounting 6-Segmented Hubs pins to reduce the risk of blade breakage WARNING: For more information go to www.P65Warnings.ca.gov. WARNING: For more information go to www.P65Warnings.ca.gov. ASCOT SUPPLY CORPORATION BUYER'S GUIDE SUPPLY CORPORATION 568 RETREADING // RASP BLADES & SPACERS Rasp Blades Rasp Blades and HUB FOR EAGLE II • Eagle II for use on Spacers (cont.) most Bandag bu#ers EAGLE II BUFFING BLADES • Fast cutting and long lasting rasps for the best texture in all tire bu"ng operations • Tested under all conditions with outstanding results 613-12900 ASCOT NO. MFG. NO. DESCRIPTION 613-12900 111031 Eagle II 9" Dia., 4" W., 1-1/2" Arbor ASCOT NO. MFG. NO. DESCRIPTION BLADES PER SET 616-11275 121181 Eagle II Refill Eagle II refills 28 per set TURBO HOLE APPLICATION • B & J Rasps can be ordered with Turbo cooling channels producing a significant increase in cooling e#ect and blade performance. These can BUFFING BLADES be retrofitted to all existing B & J rasps. • Proven to be the fastest cutting, longest lasting rasps with the best texture for all bu"ng operations • Refills have been tested under all conditions and used on all types of tire bu#ng equipment with Jet Series outstanding results • Can RETREADING // RASP BLADES & SPACERS be used in existing Saturn II or R4 hub assemblies • Fast cutting, long life. Same texture from start to finish • QUANTITY: 30 sets per box 616-11400 ASCOT NO. MFG. NO. DESCRIPTION Apollo Series 616-11400 111400 Turbo Hole Application BLADES ASCOT NO. MFG. NO. DESCRIPTION TYPE PER SET 616-43912 111136 Apollo II Refill 28 HAND RESHARPENING STONE 616-43914 111137 Apollo III Refill 30 • Used to hone the inside and outside 616-43920 111140 S115-25 Refill 30 of curved surfaces • Wooden Handle 616-43921 111141 S115-20 Refill 30 616-11116 111116 R-4-25 Refill 28 616-01420 111119 R-4-20 Refill 28 616-11521 111107 R-115-20 Refill 25 616-21525 111104 R-115-25 Refill 25 534-80057 616-43928 121177 Patriot II Refill 28 616-43940 111172 Gemini II/SII Refill 28 ASCOT NO. MFG. NO. DESCRIPTION 616-11173 111173 Gemini II/R4 Refill 28 534-80057 819206 Hand Resharpening Stone BUYER'S GUIDE ASCOT SUPPLY CORPORATION WARNING: For more information go to www.P65Warnings.ca.gov. WARNING: For more information go to www.P65Warnings.ca.gov. SUPPLY CORPORATION Insist on the Original! BLADE MATCHING GUIDE GUÍA DE CUCHILLAS Insist on the Original! Insist on the Original! COMPATIBLES Insist on the Original! BLADE MATCHING GUIDE GUÍA DE CUCHILLAS Insist on the Original! BLADE MATCHING GUIDE RASP BLADESGUÍA & SPACERS DE CUCHILLAS // RETREADING 569 BLADEIf you are looking MATCHING for alternative GUIDE blades to fit into your GUÍACOMPATIBLESSi está usted DE buscando CUCHILLAS alternativas para las hojas de su rasp simply position your blade over the pinhole marks COMPATIBLESsistema de raspado, simpleme Bladente posicioneMatching su hojaGuide en below and find the matching blade. With this reference las marcas de taladro de abajo y localice la hoja If you are looking for alternative blades to fit into your COMPATIBLESSi está usted buscando alternativas para las hojas de su choose alternative blades on the respective pages in correspondiente. Con esta referencia, puede seleccionar raspIf you simply are looking position for youralterna bladetive over blades the to pinhole fit into marks your sistemaSi está usted de raspado, buscando simpleme alternativasnte posicione para las suhojas hoja de en su thisIf you catalogue. are looking for alternative blades to fit into your hojasSi está alternativas usted buscando en las alternativas respectivas para páginas las hojasde este de su belowrasp simply and find position the matching your blade blade. over With the pinholethis reference marks lassistema marcas de deraspado, taladro simpleme de abajonte y localice posicione la hoja su hoja en PleaseraspIf you simply are note: looking Someposition forblades youralterna maybladetive be over blades multi-fit. the to pinhole fit into marks your catálogo.sistemaSi está usted de Por raspado, buscandofavor, tenga simpleme alternativas en cuentante posicione paraque algunaslas suhojas hoja de en su choosebelow and alternative find the bladesmatching on blade.the respective With this pages reference in correspondiente.las marcas de taladro Con estade abajo referencia, y localice puede la hoja seleccionar belowrasp simply and find position the matching your blade blade. over With the pinholethis reference marks cuchillaslassistema marcas de requieren deraspado, taladro un simpleme deencaje abajo múltiplente y localice posicione la hoja su hoja en choosebelowthis catalogue. andBlade alternative find the bladesmatchingMatching on blade.the respective With Guide this pages reference in correspondiente.lashojas marcas alternativas de taladro Con en las estade respectivasabajo referencia, y localice páginas puede la hoja seleccionarde este thischoosePlease catalogue. note: alternative Some blades blades may on thebe multi-fit.respective pages in hojascorrespondiente.catálogo. alternativas Por favor, Con en tenga lasesta respectivas en referencia, cuenta quepáginas puede algunas seleccionarde este Please note: Some blades may be multi-fit.