SECTION 00 00 03 DESIGN REQUIREMENTS CAD Drawing Guidelines 1. Overview This document presents CAD drawing guidelines for using and maintaining the Columbia University facilities base architectural and space CAD floor plans. All drawings submitted to the University should adhere to these guidelines. 2. Architectural Plan This drawing serves as the base plan of each floor with all the architectural elements and also including the furniture layouts in most of the drawings. In some drawings the architectural floor plan also currently includes additional information such as engineering information or construction specification information. The naming of each architectural floor plan follows the following format: Campus-Building–Floor MH-BUEL-3.dwg 3. Space Plan This drawing references the base architectural floor plan as an XREF and includes the polyline boundaries for each space drawn on layer Tri_triSpace and the room number and occupancy information placed as a text label within each of the spaces and appearing on layer triLabelLayer. Planners will have read access to these drawings. As needed for printing purposes you can turn off the space boundary layer and or the room / space label layer. The name of space floor plan CAD drawing is in the following format: Campus-Building-Floor–P MH-BUEL-3P.dwg The architectural and space floor plans are always on the same folder. 3.1 Paper Space Layouts The space floor plans include the following paper space layouts that offer a convenient way to print an 11x17 drawing: Standard Layout Designed for 11x17 Planning Layout Designed for 11x17 with space on the layout to allow for a legend You can update the attributes of the title blocks prior to printing the drawings. 1 JANUARY 2019 SECTION 00 00 03 DESIGN REQUIREMENTS 4. Architectural Plan Guidelines 4.1 Separation of Base Plans and Project Design and Construction Plans Since the architectural as-built plans are the base for all the drawings and all the projects it is essential to maintain a clean, accurate and consistent set of plans. The base plans should be maintained so as not to include project specific information or construction document specification information. All design or construction drawings should be archived and only the key elements of a plan such as building shell and core, wall partitions, doors, windows, furniture and key equipment fixtures should be reflected in the base architectural plan. The following information should not be included in the base architectural plans but rather remain archived in a separate folder as part of the project specific documents. • Dimensions • Design and construction symbols • Project notes • Project demarcation lines • Tables • Demolition information • Design or layout studies 4.2 Furniture Plans The attribute and specification details for furniture and equipment plans should not be included in the base architectural plan but rather be kept as part of the project specific documents. If the furniture or equipment attributes are embedded with the furniture or equipment blocks then their layer should be set to the Freeze status so that they will not appear when the drawing is first loaded. 5. Space Plan Guidelines All polyline boundaries should be closed and drawn accurately tracing the points of the inside edge of a space’s walls, doors or windows. Spaces can only be deleted following the Tririga standard practices. 2 JANUARY 2019 SECTION 00 00 03 DESIGN REQUIREMENTS 6. Layering Standards Layers should adhere to the following standard layering and color convention used by Columbia University Facilities and based on the AIA Layering standards. Following is a list of the standard Architectural / Structural layers: Layer Color Layer Description S-COLS 1 Columns Structural S-GRID 2 Column Grid S-GRID-DIMS Column Grid Dimensions S-GRID-IDEN Column Grid Tags A-CONV Conveying systems A-CLNG Reflected Ceiling Information A-CLNG-GRID Reflected Ceiling Grid A-CLNG-TEES Ceiling: main tees A-CLNG-SUSP Ceiling: suspended elements A-DOOR 1 Doors A-DOOR-IDEN Door Identification A-EQPM Equipment A-EQPM-OVHD Equipment: overhead A-FLOR Floor information A-FLOR-CASE 2 Floor: casework A-FLOR-EVTR 6 Floor: elevator cars and equipment A-FLOR-HRAL Floor: handrails, guard rails A-FLOR-LEVL Floor: level changes, ramps, pits, depressions A-FLOR-OTLN Floor: Floor and building outline A-FLOR-OVHD Floor: overhead (objects above) A-FLOR-RAIS Floor: raised floors A-FLOR-RISR Floor: stair risers A-FLOR-SIGN Floor: signs A-FLOR-SPCL Floor: specialties (toilet room accessories, display cases) A-FLOR-STRS 6 Floor: stair treads, escalators, ladders A-FLOR-TPTN Floor: toilet partitions A-FLOR-SHFT 6 Floor: shafts A-FLOR-WDWK Floor: architectural woodwork 3 JANUARY 2019 SECTION 00 00 03 DESIGN REQUIREMENTS P-FIXT 5 Plumbing Fixture A-FURN Furnishings A-FURN-FILE Furnishings: file cabinets A-FURN-FIXD Furnishings: fixed in place A-FURN-FREE Furnishings: freestanding A-FURN-PNLS Furnishings: system panels A-FURN-SEAT Furnishings: seating A-FURN-STOR Furnishings: system storage components A-FURN-WKSF Furnishings: system work surface components A-GLAZ 1 Glazing A-GLAZ-SILL Glazing: window sills A-HVAC HVAC A-HVAC-SDFF HVAC: supply diffusers A-HVAC-RDFF HVAC: return air diffusers A-LITE Lighting fixtures A-ROOF 7 Roof A-ROOF-HRAL Roof: handrails A-ROOF-LEVL Roof: level changes A-ROOF-OTLN Roof: outline A-ROOF-RISR Roof: stair risers A-ROOF-STRS 6 Roof: stair treads, ladders A-WALL 7 Walls A-WALL-INT 7 Walls Interior – Also on A-WALL A-WALL-EXT 3 Walls: exterior A-WALL-FULL 2 Walls: full-height – Also on A-WALL A-WALL-CNTR Walls: centerline A-WALL-FIRE 1 Walls: fire wall A-WALL-HEAD Walls: door and window headers A-WALL-JAMB Walls: door and window jambs A-WALL-MOVE Walls: moveable partitions A-WALL-PRHT Walls: partial-height A-WALL-PATT Walls: texture or hatch patterns L_1 Room Polyline Boundaries 4 JANUARY 2019 SECTION 00 00 03 DESIGN REQUIREMENTS 7. Line Weights Printed plans can utilize the following line weights to enhance readability and to provide a clear hierarchy of the architectural elements. Light Lines (~ 0.10mm) To be used for dimension, section, legends, overhead and door swing lines. Medium Lines (0.20mm - 0.25mm) For doors, furniture, cabinets, stairs, windows, partial height walls and other non-structural architectural elements and graphic symbols. Cut Lines (0.40mm +) For interior and exterior walls, columns and other structural elements. 8. Accuracy and Graphic Standards It is essential to draw new elements accurately as per dimensions taken on the field. The base drawings will be used as an electronic source for the life of a building. All CAD line work should intersect leaving no gaps. All line work and drawing elements should be drawn with color and line type set BYLAYER. Ideally blocks used should not have hidden layers within them. 5 JANUARY 2019 .