Carpentry/Cabinetmaking Tool List Hays Campus 2020-2021 Following are the required tools for the Carpentry/Cabinetmaking program. These tools can be purchased from the vendor of your choice. All tools are to be of the finest quality. Tools will be inspected prior to being used in the department. The department reserves the right to refuse the use of worn or defective tools or tools which do not conform to the specifications of this list and the department chairperson. Required Tools and Equipment Super Bar - Vaughan No B215 Speed Square - Swenson - 7” 50101 or 39468 Stair Gage Clips - Johnson No. 405 Framing Hammer - Estwing 22 oz. Framing Hammer, (or comparable) Claw Hammer - Estwing 14 or 16oz finish hammer, (or comparable) Spade Bits (Set of 6) - (Irwin) Set of Six - No. 886R Wood Chisels 1/2', 3/4', 1', & 1/4', 3/8', 1 1/2' - Great Neck Saw Mfg Co 0251060K (6 piece set) Nail Apron - Nicholas #823 or better Leather Belt - Nicholas #0984 Framing Square - Stanley No. 302-3595 Utility Knife - Stanley 10-309 1/4" impact driver w/cordless drill, combo - Makita, DeWalt, Milwaukee, Rigid, or comparable Chalk Line - Stanley ST 47-051 Tape - Stanley 25 ft. 33-525 Nail Set (Set of 3) - Stanley No. 23771 - 1/16, 1/32, 3/32 Surform File- Stanley No. 21-339 Screw Drivers: Klein No. 600-1 Standard or comparable Klein No. 600-4 Standard Klein No. 601-3 Standard Klein No. 603-1 Phillips Klein No. 603-3 Phillips Klein No. 603-4 Phillips Safety Glasses - Klein 60050 (or comparable) Carpenter's Tool Box - Metal with tray-at least 30-32" long Hard Hat Estimated Cost: $766.00 Note: Estimated costs reflect current market value and are subject to change. Vendor Information: Tools may be purchased at Heartland Building Center, Ace Hardware, Home Depot or qualified center of student choice. Please contact the Department Chair with questions or for further information. Revised 6-18-20 .