Department of Park and Recreation City of Dallas Texas scale: FINISHED GRADE. SLOPE AWAY FROM dsnd: drawn: PLAYGROUND FOR POSITIVE DRAINAGE approved: 12" WIDE REINFORCED CONCRETE PLAYGROUND EDGE (OR TO MATCH WIDTH WHERE CONNECTING TO EXISTING EDGE) 6-#3 BARS CONT. WITH #3 STIRRUP @ 24" O.C. 3/4" RADIUS (TYP.) ON EACH EDGE VERTICAL FINISH TO BE HAND RUBBED, MIN. 15" BELOW TOP OF EDGE, NO HONEYCOMBS ALLOWED, FULL DEPTH FORMS, NO EARTH FORMS ALLOWED. ELEVATION AS SHOWN 3" 3" COMPACTION ZONE for EQ 15" MIN. PLAYGROUND SAFETY SURFACE AS City of Dallas 18" SPECIFIED (TO ALLOW SLOPE SUBGRADE FOR COMPACTION) EQ MIN. 2% 3" 3" Park and Recreation Department 3" LAYER OF COURSE WASHED 3 3" 6" 3" GRAVEL; MINIMUM 4" DIAMETER (FILTER FABRIC ABOVE AND BELOW) Standard Construction Details COMPACTED SUBGRADE TO 12" 95% STANDARD DENSITY Typical Construction Details GENERAL NOTES: PLAYGROUND DETAILS 1. PLAYGROUND SURFACE TO BE APPROVED ENGINEERED HARDWOOD FIBER CHIPS. CONCRETE 2. PROVIDE JOINTING PLAN FOR APPROVAL PRIOR TO FORM WORK INSTALLATION. 1" DEPTH CONTROL JOINTS (EQUALLY SPACED) TO BE SAWCUT PLAYGROUND THROUGH THE INTERIOR FACE AND TOP EDGE OF THE PLAYGROUND BORDER. EXTEND SAWCUT JOINT COMPLETELY THROUGH THE WIDTH OF EDGE DETAIL SIDEWALK OR ADJACENT PAVEMENT. 3. 1/2" REDWOOD EXPANSION JOINTS SHALL BE PROVIDED WHERE SHOWN ON THE PLAN AND EQUALLY SPACED BETWEEN CONTROL JOINTS. issue date EXPANSION JOINTS SHALL BE CONTINUOUS THROUGH THE WALK AND CONCRETE PLAYGROUND EDGE WHERE ADJACENT. INSTALL VERTICAL EXPANSION JOINTS IN PLAYGROUND EDGE ON MAXIMUM 30-FOOT CENTERS. revisions 4. CONTRACTOR TO EXCAVATE ENTIRE PLAYGROUND AREA TO FULL DEPTH OF PLAYGROUND BORDER. C CONCRETE PLAYGROUND EDGE DETAIL 1 SCALE: 1"= 1'-0" DETAIL C-1.