ULTRARIC® PE 104 DESCRIPTION ULTRARIC® PE 104 is a polymer of propylene oxide and ethylene oxide PHYSICAL PROPERTIES¹ CHARACTERISTICS AND BENEFITS Appearance (25°C) Paste • Excellent detergent properties Active Content, wt% 100% • Versatile surfactant for a wide variety of applications Moles of EO 49 • Emulsifier Hydroxyl Number 21 mgKOH/g • Compatible with cationic, anionic and other nonionic Cloud Point* 71 °C surfactants HLB 13 Flash Point (Closed Cup) >175 °C STORAGE AND HANDLING Melting Point 38 °C Store in a covered, well-ventilated area, away from sunlight and pH (1 wt% aqueous, 25°C) 7.0 away from sources of heat or open flame. Ensure that the Viscosity (25°C) 1030 cP storage locale has adequate control of temperature, pressure, Density (25°C) 1.0414 g/cm³ and humidity. Keep the containers hermetically sealed when Boiling Point > 150 °C not in use. For more information, consult the Safety Data Sheet Relative Vapor Pressure <0.01 KPa (SDS). SHELF LIFE 24 Months from manufacturing date STANDARD PACKAGING Bulk Samples *10 wt%. in a 25% BDG aqueous solution Column1 Column2Column3 ADDITIONAL INFORMATION REGULATORY Column1Column2Column3 Sourcing Synthetic CAS Registry No.² 4 9003-11-6 Percent Renewable Content 0% USA (TSCA) 5 Listed INCI Name Poloxamer-334 Canada (DSL) 6 Listed NF Compliant No Australia (AICS) 7 Listed FCC Compliant No China (IECSC) 8 Listed RSPO (Mass Balance) Not applicable Korea (ECL) 9 Listed Non-GMO Not applicable New Zealand (NZIoC) 10 Listed Philippines (PICCS) 11 Listed US DOT 12 Not classified US EPA Inert Ingredient 13 40 CFR 180.960 Y e 0 General 0 ¹The physical properties described in the table are only for informational purposes and may be changed without notice. Please contact Oxiteno for updated data. ²Chemical Abstracts Service. DISCLAIMER This information is given in good faith, based on Oxiteno’s current knowledge on the subject, and is purely indicative. Any information, including suggestions for using the products, should not preclude experimental testing and verification, which are essential to ensure the suitability of the products to each specific application. All users shall also abide by local laws and obtain all necessary permits. When handling the product, consult the safety data sheet. In case of questions or additional needs, please contact Oxiteno through our customer service channels. COMMERCIAL OFFICES Brazil Colombia Argentina Mexico United States +55 11 3177 6102 +57 11 555 0070 +54 11 4115 5600 +52 55 5322 0560 +1 346 718 6200 [email protected] [email protected] [email protected] [email protected] [email protected].