INDICATORS•Accessories•Holders Dial Test Indicator Accessories 202-5941 303-3213 202-5940 202-5942 202-6184 202-5936 202-6232 202-6283 202-5948 202-5965 202-6284 Description Otder No. Price(D) Dovetail Indicator Clamp : ¼" Diameter × 3" Length 303-3213 $8.95 Axial Support Holder: For dovetail & 3/8" Stem diameter , 5-1/4" Length 202-5940 11.15 Axial Support Holder: For dovetail & 8mm Stem diameter , 130mm Length 202-6184 13.00 Cylindrical Holder: For dovetail & 5/32" Stem Indicators: ¼" Dia. Shank 202-5941 8.95 Cylindrical Holder: For dovetail & 5/32" Stem Indicators: 3/16" Dia. Shank 202-5942 8.95 Half Round Combination Holder: Two point adjustment and ¼" × 2 Length Holder Bar 202-5965 7.95 Mini Universal Indicator Holder: Three point adjustment and 0-12" Reach 202-5949 13.95 Indicator Clamp: Clamps diameter from 1/8" to ¼" with 5/16", 3/8" and ¼" mounting holes 202-5936 6.95 Indicator Clamp: Clamps diameter from 1/8" to ¼" with 5/32" and ¼" mounting holes 202-5948 6.95 202-5949 Adaptor sleeve: accepts 8mm stem, coverts to 3/8" diameter stem 202-6232 2.35 Adaptor sleeve: accepts 8mm stem, coverts to 4mm diameter stem 202-6283 3.00 Adaptor sleeve: accepts 3/8" stem, coverts to 5/32" diameter stem 202-6284 3.00 Swivel Dovetail Clamps Replacement Carbide Tipped • Dovetail groove for clamping test indicators Scriber for Height Gages • Bores for indicators’s stem • Hardened to approximately RC62 T • Rounded tip which cuts sharp, clear lines smoothly • Less pressure • Apply to any material Stem Clamp Order • Carbide tipped scribers have square ends Bore Hole No. Price L 5/32 & 3/8" 1/4" 202-6278 $6.60 1/4 & 3/8 1/4 202-6279 6.60 W 5/32 & 1/4 5/32 202-6274 6.60 H 3/8 & 5/32 7/32 202-6275 6.60 303-4473 5/32 & 7/32 7/32 202-6276 6.60 303-4476 3/8 & 7/32 1/4 202-6227 6.60 Size: W × T × L × H Fitted Height Gage Order No. Price (B) 6mm & 8mm 6mm 202-6282 6.60 303-4401, 303-4403, 303-4473 $14.95 0.35"×0.35"×3"×0.62" 303-4407, 303-4451, Height Gauge Bar and Universal 303-4452, 303-4454 0.35"×0.35"×3"×1.17" 303-4460 303-4474 14.95 Clamp Set 0.35"×0.35"×3"×1.61" 303-4461, 303-4462 303-4475 14.95 1/2"×1/4"×2.4"×1.2" 303-4476 19.95 Mounting Holes BarT×H×L Pin Order No. Price(D) 3/8 & 5/32" 1/4×1/2×3" 1/4" 303-4469 $9.00 Flex Vise Grip Indicator 3/8 & 5/32 0.35×0.35×3 303-4472 9.00 Holder Set 3/8 & 5/32 3/16×5/16×3 .220 303-4470B 9.00 3/8 & 5/32 5/16×5/16×4 .220 303-4411 10.95 • Compatible with electronic 3/8 & 5/32 5/16×5/16×4 303-4413 10.95 and AGD indicators • Flexible arm, total length 12" • Locking pliers, total length 7.1" • Adjustable jaw opening from 0 to 1" • Fits all indicators equipped with rods and dovetails • Clamp with dovetail and mounting holes Order No. Price(D) W/1"×.001"indicator 202-6181 $35.50 only vise grip 202-6182 29.95 CALL 630-443-6822•FAX 630-443-6823•WEB WWW.SHARS.COM 169.