SLCFxxxJ(T2)(I) 128 MB to 8 GB CompactFlash Cards GENERAL DESCRIPTION The SimpleTech SLCFxxxJ(T2)(I) are CompactFlash Cards with 128MB to 8GB of nonvolatile storage. The SLCFxxxJ(I) cards are Type I CompactFlash Cards, and the SLCFxxxJT2(I) cards are Type II CompactFlash Cards. The cards use a flash memory controller that provides a fully compatible CompactFlash interface for the flash memory. SimpleTech OEM CompactFlash cards are the product of choice in applications requiring high reliability and high tolerance to shock, vibration, humidity, altitude, and temperature. Because there are no moving parts to service or maintain, CompactFlash cards are reliable alternatives to mechanical hard disk drives for high availability and mission FEATURES critical applications. • CFA 2.0 and ATA-4 Compatibility While the inherent ruggedness and reliability of solid state storage relative to rotating hard drives is intuitive, new • Support for PCMCIA I/O, Memory and True-IDE applications for OEM CompactFlash cards are emerging due Interfaces to the low cost per usable megabyte. Most applications using • 128MB to 8GB Capacities embedded operating systems such as VxWorks™, Windows • Form Factors: CompactFlash Type I (SLCFxxxJ(I)) and XP/embedded™, and Linux™ don’t have multi-gigabyte CompactFlash Type II (SLCFxxxJT2(I)) data storage requirements, and therefore a cost savings can be realized when using this robust media. • Endurance Guarantee of 2,000,000 Write/Erase Cycles • CIS (Card Information Structure) Programmed into 256 Bytes of Internal Memory • Compatible with PC Card and Socket Services (Release 2.1 or later) • 5V or 3.3V Power Supply • Completely Solid-State (No Moving Parts) • Available in Commercial and Industrial Operating Temperature Ranges • Standard ECC Engine • 7 Year Warranty ORDERING INFORMATION Adapters CompactFlash Part Number CF Form Factor PC Card Form Factor Part Number* CF Form Factor Capacity • SLCFAD ...................Type I.......................................... Type II • SLCF128J(I) ........................Type I....................... 128 MBytes • SLCFADII ...... Type I or Type II ................................... Type • SLCF256J(I) ........................Type I....................... 256 MBytes * Custom capacities available. • SLCF512J(I) ........................Type I....................... 512 MBytes An “I” suffix added to the part number selects the Industrial Operating Temperature range option. A part • SLCF1GBJ(I) .......................Type I........................... 1 GBytes number without the “I” suffix selects the Commercial • SLCF2GBJ(I) .......................Type I........................... 2 GBytes Operating Temperature range option. • SLCF3GBJ(I) .......................Type I........................... 3 GBytes An “-F” suffix, that is SLCFxxxJ(T2)(I)-F, provides the • SLCF4GBJ(I) .......................Type I........................... 4 GBytes media set to fixed storage for non-removable IDE • SLCF5GBJ(I) .......................Type I........................... 5 GBytes applications. Some operating systems, such as Windows • SLCF6GBJT2(I) ................. Type II .......................... 6 GBytes XP, require the storage media to be identified as a fixed • SLCF7GBJT2(I) ................. Type II .......................... 7 GBytes drive before the storage media can be used as a bootable drive. SimpleTech offers the “-F” cards for these • SLCF8GBJT2(I) ................. Type II ........................ 8 GBytesII applications. Web: www.simpletech.com Document Part Number 61000-02805-111 March 2005 Page 1 SLCFxxxJ(T2)(I) COMPACTFLASH PACKAGE DIMENSIONS AND PIN LOCATIONS CompactFlash Type I Length .......................................... 1.433±.006 in (36.4±0.15 mm) Width .......................................... 1.685±.004 in (42.80±0.10 mm) Thickness (Type I) ........................... .130±.004 in (3.3±0.10 mm) (including Label Area) 26 50 .063±.002 .039±.002 1 25 .040±.003 .040±.003 .003 .130±.004 ± 2X .118 .004 ± .003 ± 2X .472 .096±.003 TOP .006 ± 2X 1.015 1.433 .030±.003 1.640±.005 .025±.003 1.685±.004 (continued) Document Part Number 61000-02805-111 March 2005 Page 2 SLCFxxxJ(T2)(I) COMPACTFLASH PACKAGE DIMENSIONS AND PIN LOCATIONS (continued) CompactFlash Type II Length .......................................... 1.433±.006 in (36.4±0.15 mm) Width .......................................... 1.685±.004 in (42.80±0.10 mm) Thickness (Type II) ................................. .197 in (5.00 mm) max (including Label Area) 26 50 .063±.002 .039±.002 1 25 .040±.003 .040±.003 .197 MAX .003 ± TOP .006 ± 2X 1.015 1.433 1.640±.005 1.685±.004 (continued) Document Part Number 61000-02805-111 March 2005 Page 3 SLCFxxxJ(T2)(I) COMPACTFLASH PACKAGE DIMENSIONS AND PIN LOCATIONS (continued) Adapter for CompactFlash Type I and II to PC Card Type II (Typical) Length .................. 3.370±.008 in (85.6±0.20 mm) Width .................... 2.126±.004 in (54.0±0.10 mm) Thickness ............ .1968 in max. (5.0 mm max.) .196 .130 2.126 3.370 1.433 Length of CF 1.738 .138 Document Part Number 61000-02805-111 March 2005 Page 4 SLCFxxxJ(T2)(I) COMPACTFLASH PIN ASSIGNMENTS PC Card Memory Mode PC Card I/O Mode True IDE Mode Pin Signal Pin Pin Signal Pin Pin Signal Pin Num Name Type Num Name Type Num Name Type 1 GND Ground 1 GND Ground 1 GND Ground 2 D03 I/O 2 D03 I/O 2 D03 I/O 3 D04 I/O 3 D04 I/O 3 D04 I/O 4 D05 I/O 4 D05 I/O 4 D05 I/O 5 D06 I/O 5 D06 I/O 5 D06 I/O 6 D07 I/O 6 D07 I/O 6 D07 I/O 7 -CE1 I 7 -CE1 I 7 -CS0 I 8 A10 I 8 A10 I 8 A10 I 9 -OE I 9 -OE I 9 -SELATA I 10 A09 I 10 A09 I 10 A09* I 11 A08 I 11 A08 I 11 A08* I 12 A07 I 12 A07 I 12 A07* I 13 VCC Power 13 VCC Power 13 VCC Power 14 A06 I 14 A06 I 14 A06* I 15 A05 I 15 A05 I 15 A05* I 16 A04 I 16 A04 I 16 A04* I 17 A03 I 17 A03 I 17 A03* I 18 A02 I 18 A02 I 18 A02 I 19 A01 I 19 A01 I 19 A01 I 20 A00 I 20 A00 I 20 A00 I 21 D00 I/O 21 D00 I/O 21 D00 I/O 22 D01 I/O 22 D01 I/O 22 D01 I/O 23 D02 I/O 23 D02 I/O 23 D02 I/O 24 WP O 24 -IOIS16 O 24 -IOCS16* O 25 -CD2 O 25 -CD2 O 25 -CD2 O 26 -CD1 O 26 -CD1 O 26 -CD1 O 27 D11 I/O 27 D11 I/O 27 D11 I/O 28 D12 I/O 28 D12 I/O 28 D12 I/O 29 D13 I/O 29 D13 I/O 29 D13 I/O 30 D14 I/O 30 D14 I/O 30 D14 I/O 31 D15 I/O 31 D15 I/O 31 D15 I/O 32 -CE2 I 32 -CE2 I 32 -CS1 I 33 -VS1 O 33 -VS1 O 33 -VS1* O 34 -IORD I 34 -IORD I 34 -IORD I 35 -IOWR I 35 -IOWR I 35 -IOWR I 36 -WE I 36 -WE I 36 -WE I 37 RDY/-BSY O 37 IREQ O 37 INTRQ O 38 VCC Power 38 VCC Power 38 VCC Power 39 -CSEL I 39 -CSEL I 39 -CSEL I 40 -VS2 O 40 -VS2 O 40 -VS2* O 41 RESET I 41 RESET I 41 -RESET I 42 -WAIT O 42 -WAIT O 42 IORDY O 43 -INPACK O 43 -INPACK O 43 Not Used O 44 -REG I 44 -REG I 44 Not Used I 45 BVD2 I/O 45 -SPKR I/O 45 -DASP I/O 46 BVD1 I/O 46 -STSCHG I/O 46 -PDIAG I/O 47 D08 I/O 47 D08 I/O 47 D08 I/O 48 D09 I/O 48 D09 I/O 48 D09 I/O 49 D10 I/O 49 D10 I/O 49 D10 I/O 50 GND Ground 50 GND Ground 50 GND Ground * Signals marked with an asterisk are not used in IDE Mode. Document Part Number 61000-02805-111 March 2005 Page 5 SLCFxxxJ(T2)(I) COMPACTFLASH PINOUT OF THE PC CARD TO CF ADAPTER Pin PC Card CF Pin PC Card CF 1 GND GND 35 GND -IOWR 2 D03 D03 36 -CD1 -WE 3 D04 D04 37 D11 -RDY/-BSY/-IREQ 4 D05 D05 38 D12 VCC 5 D06 D06 39 D13 -CSEL 6 D07 D07 40 D14 -VS2 7 -CE1 -CE1 41 D15 RESET 8 A10 A10 42 -CE2 -WAIT 9 -OE -OE 43 -VS1 -INPACK 10 A09 44 -IORD -REG 11 A09 A08 45 -IOWR BVD2/DASP 12 A08 A07 46 BVD1/-PDIAG 13 VCC 47 D08 14 A06 48 D09 15 -WE A05 49 D10 16 -RDY/-BSY/-IREQ A04 50 GND 17 VCC A03 51 VCC 18 A02 52 19 A01 53 20 A00 54 21 D00 55 22 A07 D01 56 23 A06 D02 57 -VS2 24 A05 WP/-IOIS16 58 RESET 25 A04 -CD2 59 -WAIT 26 A03 -CD1 60 -INPACK 27 A02 D11 61 -REG 28 A01 D12 62 BVD2 29 A00 D13 63 -STSCHG 30 D00 D14 64 D08 31 D01 D15 65 D09 32 D02 -CE2 66 D10 33 WP/-IOIS16 -VS1 67 -CD2 34 GND -IORD 68 GND Document Part Number 61000-02805-111 March 2005 Page 6 SLCFxxxJ(T2)(I) COMPACTFLASH SIGNAL DESCRIPTIONS Signal Name Dir Pin Description BVD2 I/O 45 This output line is always driven to a high state in Memory Mode since a (PC Card Memory Mode) battery is not required for this product. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ -SPKR This output line is always driven to a high state in I/O Mode since this (PC Card I/O Mode) product produces no audio. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ -DASP In the True IDE Mode, this input/output is the Disk Active/Slave Present (True IDE Mode) signal in the Master/Slave handshake protocol. -CD1, -CD2 O 26, 25 These Card Detect pins are connected to ground on the card.