Swarovski® Emerald Elegance Bracelet & Earrings SUPPLIES & TOOLS: #77501118 Swarovski Create Your Style™ 15 pc 6mm Emerald Bicones (2 pk) #77697118 Swarovski Create Your Style™ 6 pc 10 x 8mm Ovals (2 pk) #2949415 Sterling Elegance 26 pc 3mm Silver Rounds (2 pk) #2949406 Sterling Elegance 50 pc Silver Crimp Beads (1 pk) #2949442 Sterling Elegance 6mm Silver Closed Jump Rings (1 pk) #2949404 Sterling Elegance Silver Lobster Claw Clasps (1 pk) #2950237 Plated Silver Elegance 25 pc Head Pins (1 pk) #2950272 Plated Silver Elegance 18 pc Eye Pins (1 pk) #2949411 Sterling Elegance 6 pc. Fish Hook Ear Wires (1 pk) #32027 Cousin 19 Strand Silver Beading Wire (1 pk) Tools Needed: Needle Nose Pliers Round Nose Pliers Crimping Pliers Wire Cutters Techniques to Know: Form a Loop Jump Rings Crimp Beads DIRECTIONS: Bracelet Instructions: 1. Cut a 24" length of beading wire. Fold wire in half, around a jump ring. Slide both ends of wire through a single crimp bead until it is snug against the jump ring. Crimp the crimp bead closed. 2. String the following beads onto the joined wires: 3mm silver round, 10 x 8mm oval, and a 3mm silver round. 3. Separate the two wires and string the following beads onto each wire: an emerald bicone, a 3mm silver round, and an emerald bicone. 4. Repeat steps 2 & 3 four more times. 5. Repeat step 2 one last time. 6. Use a crimp bead to connect the two joined wires onto the jump ring on a lobster claw clasp. Trim tails. Earring Instructions: 1. Slide the following onto a head pin: 3mm silver round, 10 x 8mm emerald oval, and a 3mm round. Form a loop to make a bead drop. 2. Slide the following onto an eye pin: emerald bicone, 3mm silver round, and an emerald bicone. Form a loop to make a bead link. 3. Connect the loop on one end of the bead link to the loop on the bead drop. 4. Connect the other loop on the bead link to the bottom loop of an ear wire. 5. Repeat steps 1-4 for the matching earring. Skill Level: Advanced Beginner Approximate Crafting Time: 30-45 minutes .