TOOLS & PRECISION INSTRUMENTS CALIPERS Dial Caliper Digimatic Calipers Mitutoyo Zile 500 Series with Set andand ForgetForget Technology SELECT and Optional Output for SPC •s Adjustable zero position •s Double shock proof design •s Premium hardened stainless steel •s Full one year warranty •s Includes fitted case •s WorldsWorld's firstfirst absoluteabsolute type electronic caliper Item Pack No. Description Range Qty. •s Datum point remains in memory until replacement of battery YPI-11 6" Dial Caliper in Fitted Case 0-6 1 (approx. 20,000 hrs.), thus eliminating over-speed errors •s Origin setting, zero setting, data output Dial Calipers Mitutoyo •s Optional data hold unit and SPC cable with data switch 505 Series •s Warnings for battery replacement and soiled scale Inch and Metric •s Resolution to .0005" (0.01mm) •s Accuracy is ±.001 inch/metric Item Pack No. Range (inch)(Inch) Range (mm) SPC Qty. MI-500-195 0-4 0-100 No-Output 1 MI-500-170 0-4 0-100 SPC Data-Output 1 MI-500-171 0-6 0-150 SPC Data-Output 1 MI-500-196 0-6 0-150 No-Output 1 •s Stainless steel MI-500-197 0-8 0-200 No-Output 1 Thumb roller MI-500-172 0-8 0-200 SPC Data-Output 1 •s Thumb roller MI-500-193 0-12 0-300 No-Output 1 •s Supplied in fitted carrying case MI-905338 1 Meter ConnectingConnecting Cable 1 These dial calipers have been designed with a new dial Digimatic Calipers Mitutoyo movement to give an ultra smooth feel and to provide extra shock 500 Series protection for the gear train. To increase tool life a TiN coating has Solar Powered been applied to the beam wear surfaces on the 6" and 8" calipers. Item R-Range • per• r Pack No. Range Resoiutbn Resolution Rev. Depth of Jaws Qty. 9 MI-505-717 0-6 .001 .200 1%3 1 ⁄16 1 9 MI-505-675 0-6 .001 .100 1 9/⁄11613 1 9 MI-505-712* 0-6 .001 .100 1 9/⁄11613 1 15 MI-505-676 0-8 .001 .100 1 13/e⁄16 1 1 MI-505-720 0-12 .001 .200 2 1/⁄2 1 1 MI-505-677 0-12 .001 .100 2 1/⁄2 1 -4111qq*, *OD/ID carbide jaw Slide Utility Calipers CGENERAO Stainless Steel Digimatic calipers with solar cells which gather light energy and convert it to power. Eliminates the need for battery replacement. When ambient illumination is over 125 lux., the surplus power is stored. It can be run for approximately three hours after fully charging. Item Pack No.!I!! Range (Inch)!!!!!M!!!!!!!!!!=!!!!!!• Range (mm) Resolution Qty. MI-500-473 0-4 0-100 .0005 1 MI-500-474 0-6 0-150 .0005 1 MI-500-475 0-8 0-200 .0005 1 Inside and outsideoutside graduationsgraduations inin 32nd's32nd's andand mm.mm. AvailableAvailable in Shop-Cal Digital Calipers pocket sizes and larger capacity 10" size. si brown & sharpe Item Pack No. Capacity Qty. 1 GEN-132 331 GEN-729 441 Slide Caliper ((GENERAL Fiberglass Reinforced Plastic These calipers provide easy to read accurate measurements of day to day operations. Stainless steel for durable, reliable and accurate measurements. Features a resolution of .00005" (0.01mm) with specifications consistent with DIN 862. Its power supply is a 3V lithium battery and auto shut-off for superior A pocket size caliper with 32nd and mm graduations. longevity. InstantInstant inch/metricinch/metric conversion. Item Pack Item Pack No. Capacity Qty. No. Range (Inch)Range (mm) Qty. GEN-141 331 BS-20971 0-6 0-150 1 543 TOOLS & PRECISION INSTRUMENTS Buy One or CALIPERS Buy Bulk&SNE Fractional Digital Calipers SELECT •s Three readouts: fractional inch, decimal inch and mm 1 •s Graduations:''/12eGraduations: ⁄128 inch, inch, 0.0005 0.0005 inch,inch, 0.010.01 mm •s Zero setting at any position •s Big .5 inch (12 mm) high LCD display •s Enhanced stable display with quick sliding •s Instant SAE/metric conversion Item Pack •s Premium hardened stainless steel IIM!E!!!!!!!!!IP•No. Description Range Qty. •s Includes fitted case with two batteries YPI-9 Caliper in Fitted Case 0-6 inch (0-150 mm) 1 YPI-10 Caliper in Fitted Case 0-8 inch (0-200 mm) 1 •s Full one year warranty YPI-2 Replacement Battery 1 Fractional Depth Gauge SELECT •s Three readouts: fractional inch, decimal inch and mm 1 •s Graduations: 1/⁄112828 inch, inch, 0.0005 0.0005 inch,inch, 0.01 mm •s Zero setting at any position • Big .5 inch (12 mm) high LCD display s •s Enhanced stable display with quick sliding •s Instant SAE/metricSAE/metric conversionconversion Premium hardened stainless steel •s Premium hardened stainless steel Item Pack •s Includes fitted case with two batteries No. Description Range Qty. •s Full one year warranty YPI-6 Depth Gauge in Fitted Case 0-6 inch (0-150 mm) 1 YPI-2 Replacement Battery 1 Dial Calipers MyCal Lite 1202 Series Starrett Digimatic Calipers Mitutoyo •s Knife-edge contacts •s Thumb-operated fine adjustment roll •s Adjustable bezel •s Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod •s Positive, spring-loaded double pinion anti-backlash control •s Provided with case MyCal Lite is an innovative new digimatic caliper which is economically priced to allow everyone to benefit from the advan- Item Pack tages of modern digitaldigital gauges.gauges. Large .3" LCD digits ensure error No.Airi Range DescriptionatnimmElikQty. free reading in either inch or millimetermillimeter mode. Zero point can be STR-68814 0-4 Caliper in Fitted Case 1 STR-66964 0-6 Caliper in Fitted Case 1 set anywhere to allow comparison measurements. Accuracy STR-66979 0-8 Caliper in Fitted Case 1 ±.005". Response speed 63" per second. One SR44 battery STR-66980 0-12 Caliper in Fitted Case 1 supplied. Battery life is approximately two years under normal use. Over speed and low voltage alarms. Includes a depth bar. Electronic Calipers 799 Series Starrett Item Resolution Resolution Pack No. Range (Inch) Range (mm) (Inch) (mm) Qty. MI-700-113 0-6 0-150 .001 0.1 1 Digimatic Coolant Proof Calipers Mitutoyo 500 Series •s Lightweight, ergonomic design 67 •s Large easy-to-read LCD, .32" high •s Inch/millimeter conversion reads .0005" or 0.01mm •s Zero at any position •s Automatic shut-off after 5 minutes of nonuse •s Last measuring position retained when shut off •s Easy access to the single long-life battery •s Hardened stainless steel body for long life •s Integrated depth rod on all sizes •s Fine adjustment thumb wheel •s Lock screw to hold the slide in position These digital calipers have a sealed housing and are IP-67 rated, •s Resolution to .0005" (0.01mm) meaning it is nearly immune to the coolants, dirt, grit, and chips found in many manufacturing environments. Features a measur- •s Linear accuracy meets DIN862 found in many manufacturing environments. Features a measur- ing range from 0 to 6"(0-150mm) with a resolution of • No SPC output s No SPC output .0005"(0.01mm). Accuracy isis ±.001" inch/metric with no SPC •s Provided with case output. Item Pack Item Pack No. Range (Inch)(Inch) Range Range (mm) Description Qty. MEM!!!!!!MERIMILNo. Range (Inch) Range (mm) Qty. STR-67410 0-6 0-150 Caliper w/o Output in Fitted Case 1 MI-500-752-10 0-6 0-150 1 STR-67621 0-12 0-300 Caliper w/o Output in Fitted Case 1 MI-500-653 0-8 0-200 1 544 TOOLS & PRECISION INSTRUMENTS CALIPERS & MICROMETERS Vernier Calipers Digimatic Coolant Proof Digital Micrometer Mitutoyo 77, 293 Series •s Has a depth scale that can be read directly on Verniers , •s Micro-fine black graduation on satin chrome finish 65 for easy reading •s All measuring surfaces are ground and lapped for extreme accuracy Certified to IP65 which means they are dust proof, chip proof and coolant proof. Features include an extra large LCD readout, •s Jaws designed for outside, inside and thread carbide tipped measuring faces with a measuring range from 0 to measurement carbide tipped measuring faces with a measuring range from 0 to 1" (0-25.4mm) and resolution of .00005" (0.001mm). Instant inch/ •s Full hardened stainless steel with satin chrome mm conversion, measurement hold key, present capabilities and finish throughout zero set key. CompleteComplete withwith battery, automaticautomatic twotwo hour idle shut- 1 •s Graduations 'Am"⁄1000" on top and 1/20mm on bottom off key spanner and carrying case. Ratchet thimble, no SPC data Item Pack output. No. Range (Inch) Range (mm) Qty. Item Pack SO-200-210 0-6 0-150 1 No. Range (inch)(Inch) Accuracy Qty. SO-200-215 0-8 0-200 1 MI-293-344 0-1 +/- .00005 1 Vernier Calipers with Fine Adjustments QuantuMike Micrometers Mitutoyo 293 Series •s All measurements can be read directly on Verniers •s Extra long vernier to insure accuracy 65 •s Raised sliding surfaces prevent defacement and wear of graduations Faster measurement with 2mm per revolution instead of the •s Easy to read, clear, crisp, black engraved gradua- •s Faster measurement with 2mm per revolution instead of the standard 0.5 tions A patented ratchet thimble mechanism helps ensure repeatability •s Jaws designed for outside, inside and thread •s A patented ratchet thimble mechanism helps ensure repeatability measurement •s A function lock helps prevent error IP-65 protection level •s Full hardened stainless steel with satin chrome •s Certificate of inspection is provided 50mm/2" or lower range finish throughout model 1 With a standard bar except for 0-25mm/0-1" model •s Graduations 'Am"⁄1000" on top and 1/20mm on bottom •s With a standard bar except for 0-25mm/0-1" model •s Supplied in fitted plastic case Item Pack No.