1 PRODUCT NO’S: Narrow Cement Removal Gouge, Short S7500-01 [Complete Set with Case] Individual Instruments: Mueller-Type 2 S7505 [Narrow Cement Removal Narrow Cement Removal Gouge, Long Gouge, Short] Shaft Length: 15 cm 1 Cement Removal 3 Gouge: 9 mm, negative S7507 [Narrow Cement Removal Narrow Offset Cement Removal Gouge Gouge, Long] Shaft Length: 24 cm 2 Instruments Gouge: 9 mm, negative 4 S7510 [Narrow Offset Cement Acetabular Chisel Removal Gouge] Shaft Length: 24 cm 3 Gouge: 9 mm, negative 5 S7515 [Acetabular Chisel] Offset Chisel Shaft Length: 24 cm 4 Chisel: 7.5 mm S7520 [Offset Chisel] 6 Shaft Length: 15 cm 5 Flared Angle Chisel Chisel: 9 mm S7525 [Flared Angle Gouge] 7 Shaft Length: 24 cm 6 Gouge: 9 mm, positive, Wide Gouge angle 15° down S7530 [Wide Gouge] 8 Shaft Length: 24 cm 7 Gouge: 11.5 mm, negative "V" Splitter S7535 [“V” Splitter] 8 Used for cement removal in V-Shaped Chisel: 7 mm 9 S7587 [Saddle Punch] the knee, hip, and shoulder Shaft Length: 24ccm 9 Saddle Punch Punch: 16.5 mm x 6.5 mm S7590 [Cement Splitting Osteotome] 10 10 Shaft Length: 24 cm Cement Splitting Osteotome S7595 [Cement Removal Osteotome, Short] 11 Shaft Length: 15 cm 11 Osteotome: 8 mm Cement Removal Osteotome, Short S7597 [Cement Removal Osteotome, Long] Shaft Length: 24 cm 12 12 Osteotome: 8 mm Cement Removal Osteotome, Long S7540 [4.4 mm Drill] 13 14 S7545 [4.4 mm Drill Guide] 13 S7550 [6.4 mm Drill] 15 Optional Instruments: S7555 [6.4 mm Drill Guide] 16 14 S7560 [Straight Cement 4.4 mm Drill & Drill Guide Removal Hook] 17 Hook Curette: 10 mm S7565 [Curved Cement 15 Removal Hook] 18 Hook Curette: 10 mm 16 19 S7570 [Cross Bar] 6.4 mm Drill & Drill Guide 20 T-Handle Chuck S7575 [7 mm T-Handle Conical Tap] for use with Drills S7580 [9 mm T-Handle Conical Tap] 21 S7585 [Slotted Mallet] 22 PRODUCT NO’S: 17 9075 [Case Only] 8247-00 [T-Handle Chuck & Key] Straight Cement Removal Hook 8247-01 [T-Handle Chuck] 8247-02 [Chuck Key] 18 Curved Cement Removal Hook 19 Conical Tap & Mallet Cross Bar Conical Tap Drill & Drill Guide 20 Slotted Mallet 7 mm T-Handle Conical Tap Drill Guide 21 Drill 9 mm T-Handle Conical Tap 22 Slotted Mallet ISO 13485:2016 FREE TRIAL ON MOST INSTRUMENTS 103 Estus Drive, Savannah, GA 31404 912.236.0000 Phone Innomed-Europe Tel. +41 41 740 67 74 © 2021 Innomed, Inc. www.innomed.net [email protected] 912.236.7766 Fax Fax +41 41 740 67 71 1.800.548.2362.