Horticultural Tools and Equipment

Horticultural Tools and Equipment

HORTICULTURAL TOOLS AND EQUIPMENT Contribution of horticultural and floricultural crops to the total agricultural production in the country is quite significant due to highly favourable and varied agro-ecological diversities. Major field operations for horticultural crops include nursery/seedling preparation, post hole digging for planting, interculture, aeration, earthing, irrigation, plant protection, harvesting, handling, packaging transport. The cultivation of horticultural crops is predominantly dependent upon human labour, since commercial cultivation is only on a limited scale. Animal/power tiller or tractor-drawn mould board ploughs, disc ploughs, harrows, cultivators and rotavators, are available and used for land preparation. The fruits plants are generally perennial plants planted in pits. The tractor or power tiller operated posthole diggers are available in the country up to 30 cm diameter. These pits are filled with good soil and manure. Inter-row spaces of the pits can be tilled with power tiller/tractor drawn tillage machinery to destroy the weeds, increase aeration and conserve moisture. Small power tillers can be used in terraced fields. The fruit seedsand stonesare sown manuallyfor raisingthe nursery!seedlings for grafting or direct planting. For planting bold seeds,manual dibblers have beendeveloped. The inclined plate and pneumaticplanters have beensuccessfully used for direct sowing of small vegetable seeds.Vegetable transplantersare undergoingextensive feasibility evaluation for planting vegetable seedlings. Hand tools such as budding and grafting knife, pruning knife and secateurscan be used for plant propagation andpruning. Telescopichandles can be used for the pruning of the twigs and branches,which are not in the reachof humanhand. Hand tools or sl')1allpower tillers with rotavatorscan be used for weedingand interculture. Different types of sprayersand dustersare availablefrom manuallyto poweroperated such as knapsack sprayersfoot operatedsprayers, power operated mist blowers and dustersfor plant protection. Foggingmachines and mist blowers are availablewhich can be used in the greenhouses and for covered crop cultivation Different types of pumps which includes centrifugal, turbine, submersible,axial flow, mixed flow pumps etc. are available for lifting of the water for irrigation. including sprinklerand drip irrigation systems. Harvestingis the most labour intensive operationdue to delicate nature of fruits. For table purpose,harvesting would continueto be donemanually. Mechanical },arvesters for fruits can be used where fruits are sent immediatelyto processingindustries for extractionof juices or making other products. Grading of the fruits is done accordingto the size and colour, which is presentlybeing done manually.Attempts have beenmade to developfruit gradersfor apple and oranges,which are yet to be commercialised. 357 AXE Features The axe is a simple hand tool, which consists of cutting edge and an eye for fixing of a handle. It is forged to shape from a single piece. Axes are available in various sizes and shapes.The commontypes are handfelling, felling estatepattern and felling tradepattern. For operation,the operatorholds the handlewith both handsat convenientposition and the tool is raised to suitable position and struck with force againstthe work. The penetrationi~ caused through impact action, which shearsthe slice of wood. The axesare made from high carbon steeland the cutting edgeis hardenedto 550-650HB. Specifications Length of head (mm) 155-270,depending upon type Width of cutting edge (mm) Hand axe 100 Felling axe 115 Felling estate pattern 105-120 Felling trade pattern 65-85 Weight (kg) 1, 1.6, 1.8,2, 2.5, and 2.7 dependingupon type Uses Axe is multipurpose cutting tool used for felling and delimbing of trees, splitting of logs for firewood and dressing of logs for timber conversion. Small axes are also used for clearing of bushes. Sources(Appendix) 13,29,92,116,155,206,209,249,304,385,387,391,420, 557, 569, 633, 658, 699, 700, 701,780,783,784,857,858,859,861,870,887,917,938, 961,1004,1009,1010,1108, 1126,1143,1164,1189,1272,1282,1291,1521,1528, 1536, 1614, 1667, 1684, 1732, 1736 AXE Local Name: Kuthar Features It is a cutting tool made from spring steel or vehicle axle and is used in north-eastern states of the country. The kuthar is made in a single piece by forging process by local artisans. This has a cutting edge with an eye for fixing of a handle. The cutting edge is hardened and ground to sharp edge for felling of trees and cutting of wood. Usually bamboo handle is used. The tool is operated by single person by raising the tool head with handle and striking the head 358 againstthe materialto be cut. Specification Raw materials used Blade Leaf spring/vehicleaxle. Handle Wood Dimension of blade Lengthx WidthxThickness (mm) 160-200x90-110x35-40 Angle between the blade and handle (degrees) 80-90 Dimension of handle Diameter (mm) 35-40 Length (mm) 800-1000 Weight (kg) 1.0-1.2 (without handle) Uses Used for cutting wood, bamboo, clearance if jungle and forest. Sources(Appendix) 100,114,121,232,250,950,1251 CARPENTRY AXE Local name:Hatora Feature It is an adzetype of cutting tool made out of leaf spring or vehicle axle by forging operation. The tool is made in single piece with an eye for insertion of handle. The cutting edge is made sharp, hardenedand tempered to suitablehardness. The tool is provided with a shorthandle. For operationthe tool head is raised by the handle and struck againstthe wood for peelingor cutting. Specification Raw materials used Blade Leaf spring Handle Bamboo/wood Dimensionofblade Lengthx WidthxThickness (rom) 150-170x50-60x15-20 Dimension of handle Diameter (rom) 30-35 Length (rom) 300-400 Angle between the blade and handle (degrees) 85-90 Weight (kg) 0.40-0.50 (without handle) Uses It is used for cutting and ripping of bamboo for mat structures, storage structures and to cut and split wooden logs. Sources(Appendix) 136,232,853, 1083, 1095,1224, 1292 359 AXE Local Name: Singjang Features It is a common cutting tool with a long wooden handle used in Manipur region. These are available in two different shapes and sizes. The axe is made in single piece from old leaf spring steel or used vehicle axle by forging. The cutting edge is hardened and slightly curved. The operation is similar to other axes. Specifications Raw materials used Blade : Leaf spring/vehicle axle. Handle : Wood Dimensions of blade LengthxWidthxThickness (mm) : 270-300 x 120-170 x 50-60 Dimensions of handle Diameter (mm) : --. 30-40 Length (mm) : 900-1100 Angle between blade and handle (degrees) : 85 -90 Weight (kg) : 1.40-1.60 (without handle) Uses Used for cutting and splitting of woodenlogs and clearingof jungle. Sources(Appendix) 789,792,799,803, 1216, 1625, 1647 AXE Local Name: Egging Features It is a common hand tool fabricated by local artisans of Arunachal Pradesh and is used for felling of trees and bamboos. The axe is made in single piece from old leaf spring steel or vehicle axle by forging operation. The cutting edge is sharpened and hardened to suitable hardness. The cutting edge is slightly curved so that a part of the edge penetrate in the wood for cutting at a particular instant and reduces power requirement during operation. For operation the tool head is raised by the handle and struck against the wood for cutting or splitting. Specification Raw material used Blade Vehicle axle/leaf spring Handle Wood Dimension of blade LengthxWidthxThickness (mm) 180-200xI00-Ilx55-60 Angle between the blade and handle (degrees) 90 Dimension of handle Diameter (rom) 30-35 360 Length (mm) 800-1000 Weight (kg) 1.00-1.20 Uses Used for clearing of jungle and forest and for felling trees and bamboo. Sources Various blacksmiths of Arunachal Pradesh AXE Local Name: Hraipni Features The hand tool is made in single piece from old leaf spring steel or vehicle axle by forging operation. The eye head is different in shape than the conventional axes commercially available in the market. The cutting edge is sharpened and hardened. For easy penetration in the wood the edge is made slightly curved. For operation, the tool head is raised by the handle and struck against the wood. Specification Raw materialused Blade Vehicle axle/leafspring Handle Wood Dimensionof blade LengthxWidthxThickness(mm) 180-200 x 50-55 x 25-30 Angle betweenthe bladeand handle(degrees) 90 Dimensionof handle Diameter(mm) 40-45 Length (mm) 800-1000 Weight (kg) 0.80-1.00(without handle) Uses The axe is used for clearingjungle and forest, felling treesand bambooand splitting of wood. Sources Various blacksmiths of Mizoram State CARPENTRY AXE Local Name: Hachhek Features The hand tool is similar to adze and generally used by the carpentry for rough sizing. One of the end is tapered and flattened to sharp edge and the other end narrowed down to form a tang. The blade is made from leaf spring steel by forging operation. The tang is fitted in a bamboo handle. 361 Specification Raw material used Blade Leaf spring Handle Bamboo Dimension of blade Lengthx WidthxThickness (mm) 100-126 x 40-45 x 12-15 Angle between the blade and handle (degree) 75 (approx) Dimension of handle Diameter (mm) 30-45 Length (mm) 350-400 Weight (kg) 0.35-0.40 Uses Used for ripping or splitting of wood and bamboo, rough sizing and to cut the wood for fuel. Sources Various blacksmiths of Mizoram State. AXE Local Name:Sdie Features Axe is one of the importantagricultural tools of Meghalayaused for cutting/felling big treesand clearingof vegetation.These are generally made of old vehicle axle or leaf spring scrap by forging. It is made in single pieceand has cutting edgehardened and temperedfor long servicelife and an eye for fitting handle. Its operationis similar to otheraxes. Specifications Raw materialused Blade Vehicle axle/leafspring Handle Wood Dimension(without handle) LengthxWidthxThickness(mm) 150-200 x 80-100 x 40-50 Angle betweenthe bladeand handle(degree) 90 Dimensionof handle Diameter(mm) 30-40 Length (mm) 800-1000 Weight (kg) 0.90-1.00 Uses Used for cutting wooden logs and clearing of forest.

View Full Text

Details

  • File Type
    pdf
  • Upload Time
    -
  • Content Languages
    English
  • Upload User
    Anonymous/Not logged-in
  • File Pages
    26 Page
  • File Size
    -

Download

Channel Download Status
Express Download Enable

Copyright

We respect the copyrights and intellectual property rights of all users. All uploaded documents are either original works of the uploader or authorized works of the rightful owners.

  • Not to be reproduced or distributed without explicit permission.
  • Not used for commercial purposes outside of approved use cases.
  • Not used to infringe on the rights of the original creators.
  • If you believe any content infringes your copyright, please contact us immediately.

Support

For help with questions, suggestions, or problems, please contact us