Government College of Technology; Coimbatore – 641013 Academic Research International Journals - 2012 CIVIL ENGINEERING A.Gandhimathi, T.Meenambal, “Analysis of heavy metal for soil in Coimbatore by using ANN Model” – European Journal of Scientific Research, ISSN 1450-216X, Vol.68, No.4, pp.462-474, 2012. G.Prabhakaran, T.Meenambal and N.Ramesh, “Physico-Chemical Analysis of Kelavarapalli Dam Water in TamilNadu” – International Journals Pollution Research, 31(2), pp.273-276, 2012. Jino John, T.M.Maya and T.Meenambal, “Mathematical Modeling for Durability characteristics of Fly Ash concrete” – International Journal of Engineering Science & Technology (IJEST) – ISSN: 0975-5462, Vol.4, No.01, pp.353-361, January 2012. Gandhimathi, A., Meenambal, T., “Spatial Prediction of Heavy Metal Pollution for Soils in Coimbatore, India based on ANN and Kriging Model”. European Journal of Scientific Research, Vol. 79, No. 2, pp. 198-207, 2012. B.Haganesh, S.Nithiarasu, Dr.T.Meenambal and N.Balasubramanian, “ Statistical Approach for Crew Balancing in Construction” - International Journal Engineering Science & Technology (ESTIJ), ISSN: 2250-3498, Vol.2, No.4, August 2012. Haganesh.B, Shiva Prasad.B.M, Dr.T.Meenambal, “Use of Artificial Neural Network for workforce in typical residential buildings” – International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp. 1-10, August 2012. Gandhimathi.A, B.Haganesh, Dr.T.Meenambal, “An Experimental study on fly ash blended cement concrete structures with organic (corrosion) inhibitor” - International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp.1-12, August 2012. Haganesh.B., Senthilkumar.P., and Dr.T.Meenambal “Sustainable Energy Management by Optimizing Daylight with Artificial Neural Network” - International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp.1-11, August 2012. Haganesh.B., Sundareswar.V., and Dr.T.Meenambal “Sustainable Energy Management by Optimizing Daylight a Statistical Approach” - International Journal of Engineering Research & Technology (IJERT), Vol 1, Issue 6, pp.1-11, August 2012. Priyadhrashini.S., B.Haganesh and Dr.T.Meenambal., “Overview of Ewaste Management Practices and their Legislations in India” - International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 7, pp.1-6, September - 2012. Mrs.P.Shanthi, Dr.T.Meenambal, and Prof.N.Balasundram, “Physico chemical analysis of ground water near municipal solid waste dumping sites in Coimbatore city” - International Journal Engineering Science & Technology (ESTIJ), ISSN: 2250-3498, Vol.2, No. 5, pp. 889-893, October 2012. Suganya.S., B.Haganesh, A.Gandhimathi, Dr.T.Meenambal “Mathematical Modelling for Strength Characteristics of Fly ash concrete” - International Journal of Engineering Research & Technology (IJERT), Vol.1, Issue 7, pp.1-5, September 2012. Lakshmi Priya, Thyagarajan, Rontala Navakoti Uma, Subpiramaniyam ivakumar, Thirumoorthy Meenambal, Hyun-Keun Son “Bioremediation of Pulp and Paper Industry Secondary Sludge Spiked with Cow Dung and Effective Microorganisms Using Epigeic Earthworm Eudrilus eugeniae (Kinberg)” Dynamic soil, Dynamic Plant, pages In press; ISBN: 1749-6500, Jan 2012. Nalina.P., Meenambal.T and Sathyanarayan.R., “Long Term Land use Land Cover Dynamics of Nilgiri District in Western Ghats of Tamil Nadu, India” using Satellite Remote Sensing Technique - European Journal of Scientific Research, ISSN 1450-216X, Vol. 85 No 4, pp.626-632 September, 2012. Navaneethakrishnan A and V.M.Shanthi (2012), “Experimental Study of Self Compacting Concrete (SCC) using Silica Fume”, International Journal of Emerging Trends in Engineering and Development, Iss.2, Vol.4, 475-482. Sunilaa George, R. Thenmozhi and P.N.Magudeswaran, Corrosion Potential of Activated Fly Ash Concrete, Asian Journal of Chemistry, Vol.24, No.1, 2012, 55-41 Sunilaa George, Thenmozhi, R. and Magudeswaran, P. N, Study on corrosion of activated fly ash concrete beams , Asian Journal of Chemistry, Vol. 24, No.11, 2012, 5142-5144 Chithra R, Thenmozhi R and Ravathi M.C, Ductility of Prefabricated Cage Reinforced Concrete Beams: Analytical Study International Journal of Civil and Structural Engineering, Vol.2, No.4, 2012, 1026-1034 Senthil Vadivel T and Thenmozhi R, Experimental Study on Waste Tyre Rubber Replaced Concrete: An Eco-friendly Construction Material, Journal of Applied Sciences Research, 8(6), 2012, 2966-2973 DeepaShri S, Thenmozhi R and Anitha M , Experimental Validation of a Theoretical Model for Flexural Capacity of Hybrid Ferrocement Slab, European Journal of Scientific Research, Vol.73, No.4, 2012 , 512-526 Anitha M , Thenmozhi R, DeepaShri S, Behaviour of Htbrid Ferrocement slabs subjected to Impact, Journal of Emerging Trends in Engineering and Technology, Vol.4, No:2, 2012, 465-474 DeepaShri S, Thenmozhi R, Flexural Behavior Of Hybrid Ferrocement Slabs with microconcrete and fibers, Journal of Emerging Trends in Engineering and Development, Vol.4, No:2, 2012, 165-177 DeepaShri S, Thenmozhi R, An Experimental Investigation On The Flexural Behavior Of SCC Ferrocement Slabs Incorporating Fibers, Journal of Engineering Science and Technology, Vol: 4 Issue: 5, 2012, 2146-2158 M. S. Deepak, R. Kandasamy , R. Thenmozhi, Investigation on Lateral- Torsional Buckling Performance Of Cold-Formed Steel ‘C’ Channel Sections , Journal of Emerging Trends in Engineering and Technology, Vol.4, No:2, 2012, 538-551 S.Rohini, R Thenmozhi and S Deepa Shri, Finite Element Modeling of Ferrocement Slabs in Flexure Using ANSYS, Journal of Emerging Trends in Engineering and Technology, Vol.4, No:2, 2012, 500-508 R. Thangaraj and R. Thenmozhi, Mechanical Properties of High Volume Fly Ash as a Binder for Concrete Structures, International Journal of Advances in Science and Technology , Vol.4, No:5, 2012, 94-100 R. Thangaraj and R. Thenmozhi Performance of High Volume Fly Ash in Concrete Structures, IOSR , Journal of mechanical and civil engineering, Volume 3, Issue 1, 2012, 28-33 S.Deepa shri. R.Thenmozhi, M.Anitha, Mechanical properties of SCC with polypropylene Fibers, International Journal of advanced Scientific research and technology, Volume 3, No.2, 2012, 375-388 MECHANICAL ENGINEERING R.Jothimurugan, K.S.Amirthagadeswaran and Joel Daniel , Performance of silver coated copper tool with kerosene-servotherm Dielectric in Monotherm, Journal of Applied Sciences.12(10) ISSN 1812-5654, 2011,999-1005 P Senthil and K.S.Amirthagadeswaran , Experimental investigation on the effect of applied pressure on microstructure and mechanical properties of squeeze cast AC2A aluminium alloy, Australian Journal of Mechanical Engineering , Vol. 10 , Issue 1, 2012, 2244-2250 P Senthil and K.S.Amirthagadeswaran , Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method, Journal of Mechanical Science and Technology, , Vol 26, Issue 4, 2012, 1141-1147. Shanmugaraja, M., Nataraj, M. and Gunasekaran, N , Literature snapshot on six sigma project selection for future research, Int. J. of Services and Operations Mgmt, Vol. 11 No. 3 , (2012), 335 – 357. Shanmugaraja, M., Nataraj, M. And Gunasekaran, N.,Six Sigma project selection via quality function deployment, Int. J. of Productivity and Quality Mgmt, Vol.10, No. 1, 2012, 85 – 111 Sankar, S., Nataraj, M., and Prabhu Raja, V, Failure analysis of bearing in wind turbine generator gearbox’’, Journal of information systems and communication, Vol. 3, (February 2012), 302 – 309. Ragoth Singh, R., and Nataraj, M, Study on Performance of Plunger Pump at Various Crank Angle Using CFD Engineering Science and Technology: An International Journal (ESTIJ), Vol. 2, No. 4, August 2012, 549 – 553. Ragoth Singh, R., and Nataraj, M, Analysis and Optimization of Pump Performance Variables using Genetic Algorithm and Taguchi Quality Concept: A Case Study, International Journal of Mechanical Engineering applications Research, International Journal of Mechanical Engineering applications Research, Vol 03, Issue 03, (Aug-Sep 2012), 185 – 189 Ragoth Singh, R., and Nataraj, M, Optimizing impeller geometry for performance enhancement of a centrifugal Blower using the Taguchi quality concept, International Journal of Engineering Science and Technology, Vol 04, No. 10, October 2012, 4308 – 4314 Ragothsingh, R. and Nataraj, M. Parametric study and optimization of pump impeller by varying the design parameter using computational fluid dynamics pp. International Review of Mechanical Engineering, Vol. 6, (2012), 1581 - 1585. Shanmugaraja, M., Nataraj, M. and Gunasekaran, N. Total Performance Excellence – a model to implement Six Sigma in service organizations, Int. J. of Six Sigma and Competitive Advantage, Vol. 7, No. 2/3/4, 2012, 209 – 242. S.Gopi & K.Manonmani, Influence of Shoulder Profile and Shoulder Penetration on Joint Strength; of Friction Stir Welded AA6082 in Conventional Milling Machine, European Journal of Scientific Research, Vol.73; No.1, 2012, pp 20-32 S.Gopi & K.Manonmani, Predicting Tensile Strength of Double Side Friction Stir Welded 6082-T6 Aluminium Alloy, Science and Technology of Welding and Joining, 13.Vol.17; No.7; 2012, pp.601-607. S.Gopi & K.Manonmani, Optimization of Process Parameters on Joint Strength of Friction Stir Welded 6082-T6 Aluminium Alloy, International Journal of Materials Science, Vol.7; No.3; 2012, pp.223-232 S.Gopi & K.Manonmani , Study of Friction Stir Welding Parameters in Conventional Milling Machine for 6082-T6 Aluminium