FUJITSU SEMICONDUCTOR LIMITED Nomura Fudosan Shin-yokohama Bldg. 10-23, Shin-yokohama 2-Chome, Kohoku-ku Yokohama Kanagawa 222-0033, Japan Tel: +81-45-415-5858 http://jp.fujitsu.com/fsl/en/ MICROCONTROLLER SUPPORT TOOL For further information please contact: North and South America Asia Pacific FUJITSU SEMICONDUCTOR AMERICA, INC. FUJITSU SEMICONDUCTOR ASIA PTE. LTD. 1250 E. Arques Avenue, M/S 333 151 Lorong Chuan, Sunnyvale, CA 94085-5401, U.S.A. #05-08 New Tech Park 556741 Singapore Tel: +1-408-737-5600 Fax: +1-408-737-5999 Tel: +65-6281-0770 Fax: +65-6281-0220 http://us.fujitsu.com/micro/ http://sg.fujitsu.com/semiconductor/ Europe FUJITSU SEMICONDUCTOR SHANGHAI CO., LTD. FUJITSU SEMICONDUCTOR EUROPE GmbH 30F, Kerry Parkside, 1155 Fang Dian Road, Pudong District, Pittlerstrasse 47, 63225 Langen, Germany Shanghai 201204, China Tel: +49-6103-690-0 Fax: +49-6103-690-122 Tel: +86-21-6146-3688 Fax: +86-21-6146-3660 http://emea.fujitsu.com/semiconductor/ http://cn.fujitsu.com/fss/ Korea FUJITSU SEMICONDUCTOR PACIFIC ASIA LTD. FUJITSU SEMICONDUCTOR KOREA LTD. 2/F, Green 18 Building, Hong Kong Science Park, 902 Kosmo Tower Building, 1002 Daechi-Dong, Shatin, N.T., Hong Kong Gangnam-Gu, Seoul 135-280, Republic of Korea Tel: +852-2736-3232 Fax: +852-2314-4207 Tel: +82-2-3484-7100 Fax: +82-2-3484-7111 http://cn.fujitsu.com/fsp/ http://kr.fujitsu.com/fsk/ Specifications are subject to change without notice. For further information please contact each office. All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device; FUJITSU SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of overcurrent levels and other abnormal operating conditions. Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. ©2010-2012 FUJITSU SEMICONDUCTOR LIMITED Printed in Japan AD07-00049-6E December 2012 Edited: Sales Promotion Department FUJITSU SEMICONDUCTOR LIMITED FujitsuFujitsu SemiconductorSemiconductor C o n t e n t s Microcontroller Microcontroller 01 Fujitsu Semiconductor DevelopmentDevelopment EnvironmentsEnvironments Microcontroller Development Environments Support hardware 03 Development System (32-bit/16-bit Microcontroller On-chip Debugger) 04 Development System Coarse FlowFlow ofof DevelopmentDevelopment (8-bit Microcontroller On-chip Debugger) SystemSystem 05 Development System (32-bit Microcontroller) Request/Request/ “V-modelV-model” testingtesting 06-07 Development System (16-bit Microcontroller) requirementrequirement 09-12 Development Tool Lineup (32-bit Microcontroller) 13-16 Development Tool Lineup (16-bit Microcontroller) 17-18 Development Tool Lineup (8-bit Microcontroller) 19-20 Evaluation Board / Starter Kit ESL/Sim 21-22 Education Kit DeDefifinene TuningTuning 23-24 Program Writing Support requirementsrequirements technology, etc. Support software 25-26 Fujitsu AUTOSAR Solution 27-32 SOFTUNE / REALOS series ComplianceCompliance testingtesting DesignDesign Development support tool Development granularity Development SOFTUNE™ 33-36 Tools supporting FM3 family On-chip (ARM Cortex-M3 core) 2 High Integration 37-42 Tools supporting FR family, F MC family Integration debugger (Fujitsu original cores) DetailedDetailed performance testingtesting designdesign debugger Coding/Coding/ UnitUnit compilecompile testingtesting Implementation Testing Fine Mass production SOFTUNE is a registered trademark of FUJITSU SEMICONDUCTOR Limited. 01 Microcontroller Support Tool Microcontroller Support Tool 02 Development System (hardware tools) Fujitsu Semiconductor provides development tools such as emulators and adapters for developing software for the FR family and F2MC family. New 8FX Family・8-bit Microcontroller On-chip Debugger Features of the MB2146-07-E (BGM adapter) External view of system ・ 2 ・ ● Supports microcontroller operating voltages of +1.8 to +5.5V FR Family 32-bit/F MC-16FX Family MB96600 Series 16-bit (The upper and lower limits on the microcontroller operating voltage and e Microcontroller On-chip Debugger operating frequency vary between each of the devices. For the operating r a voltage and operating frequency of each MCU, see the documentation related w d r to that device (data sheet, hardware manual, etc.)) a Features of the MB2100-01-E emulator h External view of system ● Compact development enviro nment, with small lightweight BGM adapter t r ● o Debug using a flash microcontroller on a mass-production board ● Debugging possible over single-wire serial p ● p Connect to the flash microcontroller using a single wire coaxial cable ● Because the monitor program executes in a dedicated memory space, u S ● Read from and write to memory without stopping the CPU it does not consume any of the user memory space ● Connect to a flash microcontroller at up to 10 m ● Built-in continuous execution, step execution, and forced break functions ● Configure traces and multiple events ● Hardware breakpoints: 3 points ● Security function with password ● Software breakpoints: 256 points ● Compact size and light weight 84.8 mm x 53.6 mm x 21.3 mm, 70.3 g ● Host interface: Able to connect using USB2.0 Full Speed 12 Mbps ● Connect using USB 2.0 High Speed ● RAM realtime monitor ● The power supply is USB bus-powered ● Standalone programming ● Power supply isolation ● Supplies power to the target microcontroller ● Supports all flash microcontrollers that includes the single-wire e r coaxial cable debugging interface (MDI) a w ● t The debug interface complies with JPwire, which is a single wire f o s standard interface specification established by the JASPAR standards t r organization o p p u S System Configuration System Configuration BGM adapter SOFTUNE (On-chip in-circuit emulator) Integrated Development Environment (Debugger) USB cable (included) l Workbench o Mass-production board of target device o emulator t t USB 2.0 debugging software r MB2146-07-E o High Speed Communication speed p maximum 50Mbps Flash microcontroller Personal computer SOFTUNE integrated p u development environment s t n e m p o l Single-wire coaxial e v connection (maximum 10m) e MB2100-01-E D 84.8mm×53.6mm×21.3mm 70.3g User target system MCU CPU Built-in debugging circuit The connection is by a single - Run to Break microcontroller pin only - Event setting Dedicated DMA - Trace (instruction & data) for debugging 3322 - Memory access bbitit 1166 ● JPwire® is a registered trademark of JASPAR. bbitit ● ™ is a trademark of FUJITSU SEMICONDUCTOR Limited. 8 bbitit 03 Microcontroller Support Tool Support hardware Microcontroller Support Tool Support hardware 04 Development System (hardware tools) FR Family・32-bit Microcontroller F2MC-16FX Family MB96300 Series・16-bit Microcontroller Features of the MB2198-01-E emulator External view of system Features of the MB2198-01-E emulator External view of system ● Supported DSU: