Dear Sceptre Customer, Congratulations on your new ultra high definition SCEPTRE UHD Display purchase. This display supports 4K resolution. Thank you for your support. To ensure safety and many years of trouble free operation of your display, please read the manual carefully before making any adjustments, and keep them in a safe place for future references. We hope you enjoy your new SCEPTRE UHD Display. For technical assistance, please call 1800-788-2878 and select option 3 or email our tech support group at [email protected]. For all other inquiries, please call 1800-788-2878 and select option 4 or email our customer service group at [email protected]. Web Chat is available during business hours M-F 8:30AM-5:30PM. We recommend you register your SCEPTRE Display at our online website http://www.sceptre.com/registration.html. This 4K UHD Display is MHL® ready using HDMI 1 / MHL. This UHD Display supports 4K resolution at 60 Hz refresh rate under HDMI 1, 2, and 3. - 1 - www.SCEPTRE.com SCEPTRE UMR Series UHD Display User Manual IMPORTANT INFORMATION - 2 - www.SCEPTRE.com SCEPTRE UMR Series UHD Display User Manual SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightening storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. - 3 - www.SCEPTRE.com SCEPTRE UMR Series UHD Display User Manual SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference. To avoid the risk of electric shock or openings are not blocked or covered. component damage, switch off the Do not place the display in a power before connecting other bookcase or cabinet unless proper components to the display. ventilation is provided. Unplug the power cord before Never push any object into the cleaning the display. Please use the ventilation slots of the display. Do not included custom bezel cleaning cloth place any objects on the top of the for cleaning the bezel of the display Product. It could short circuit parts only. Do not use a liquid or a spray causing a fire or electric shock. Never cleaner for cleaning the product. Do spill liquids on the display. not use abrasive cleaners. Do not use the display in a portrait Always use the accessories format (by rotating 90 degrees) under recommended by the manufacturer to high temperature environment (25°C insure compatibility. or higher), since this would retard heat When moving the display from an area dissipation and would eventually of low temperature to an area of high damage the display. temperature, condensation may form The display should be operated only on the housing. Do not turn on the from the type of power source display immediately after this to avoid indicated on the label. If you are not causing fire, electric shock or sure of the type of power supplied to component damage. your home, consult your dealer or Do not place the display on an local power company. unstable cart, stand, or table. If the The power cable must be replaced display falls, it can injure a person and when using different voltage from that cause serious damage to the specified in the User Manual. For appliance. Use only a cart or stand more information, contact your dealer. recommended by the manufacturer or The display is equipped with a three- sold with the display. pronged grounded plug, a plug with a Any heat source should maintain a third (grounding) pin. This plug will fit distance of at least 5 feet away from only into a grounded power outlet as a the display, i.e. radiator, heater, oven, safety feature. If your outlet does not amplifier etc. Do not install the product accommodate the three-wire plug, too close to anything that produces have an electrician install the correct smoke or moisture. Operating the outlet, or use an adapter to ground the product close to smoke or moisture appliance safely. Do not defeat the may cause fire or electric shock. safety purpose of the grounded plug. Slots and openings in the back and Do not overload power strips and bottom of the cabinet are provided for extension cords. Overloading can ventilation. To ensure reliable result in fire or electric shock. operation of the display and to protect it from overheating, be sure these - 4 - www.SCEPTRE.com SCEPTRE UMR Series UHD Display User Manual The wall socket should be installed immediately and contact your dealer near the equipment and should be for repair. Continued use of the easily accessible. product may cause fire or electric Only the marked power source can be shock. used for the product. Any power Do not install the product in an area source other than the specified one with heavy dust or high humidity. may cause fire or electric shock. Operating the product in environments Do not touch the power cord during with heavy dust or high humidity may thunderstorms. To avoid electric shock, cause fire or electric shock. avoid handling the power cord during Hold the power connector when electrical storms. removing the power cable. Pulling the Unplug the unit during a lightning power cable itself may damage the storm or when it will not be used for a wires inside the cable and cause fire long period of time. This will protect or electric shocks. When the product the display from damage due to power will not be used for an extended surges. period of time, unplug the power Do not attempt to repair or service the connector. product yourself. Opening or removing To avoid risk of electric shock, do not the back cover may expose you to touch the connector with wet hands. high voltages, the risk of electric shock, Insert batteries in accordance with and other hazards. If repair is required, instructions while using the remote please contact your dealer and refer control. Incorrect polarities may cause all servicing to qualified service damage and leakage of the batteries, personnel. operator injury and contamination the Keep the product away from moisture. remote control. Do not expose this appliance to rain or If any of the following occurs please moisture. If water penetrates into the contact the dealer: product, unplug the power cord and o The power connector fails contact your dealer. Continuous use in or frays. this case may result in fire or electric o Liquid sprays or any object shock. drops into the display. Do not use the product if any o The Display is exposed to abnormality occurs. If any smoke or rain or other moisture. odor becomes apparent, unplug the o The Display is dropped or power cord and contact your dealer damaged in any way. immediately. Do not try to repair the o The performance of the product yourself. Display changes Avoid using dropped or damaged substantially. appliances. If the product is dropped Operating environment: Temperature: and the housing is damaged, the 5°C ~ 35°C, Humidity: 10% to 90% internal components may function non-condensing, Altitude: 0~10,000 ft. abnormally. Unplug the power cord - 5 - www.SCEPTRE.com SCEPTRE UMR Series UHD Display User Manual IMPORTANT INFORMATION Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the display, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.