050-051 08.2.22 11:24 PM ページ 2 Polishing Pad / Burr Scraper / Pipe Cutter / Hand Nibbling Tool METAL WORKING TOOLS K K-140/141/142 � POLISHING PAD CUTTERS CRIMPERS TWEEZERS These are rubberized abrasive blocks designed to remove rust, oxides and other unwanted coatings. WIRE STRIPPERS ● They are made from alumina media which is a very good abrasive.� � ■ Operating temperature limit：Approx. 60℃ to 70℃� K-140 K-141 K-142 Dimensions � Part No. Grit Grade Example used Materials mm Weight ※It should only be used when the tip has returned K-140Medium♯60 Steel K-140 K-141 K-142 to room temperature. Foamed NBR & K-141Fine♯120 AluminumSintered alumina 50×25.5×20 4 The K-140 has medium grade, #60 The K-141 is very good for The K-142 is very good for cleaning media.It is best for removing rust removing burrs on aluminum soldering tips especially for cleaning K-142Extra fine♯320 Soldering iron tips and oxides from the surface of metals. sheets or other soft materials. the oxides from using lead free solder. SCREWDRIVERS & K-35 � WRENCHES BURR SCRAPER ● It can cut copper, brass, aluminum and thin stainless steel tube and conduit tubes.� ● The main body of the tools is made from high WORKING METAL strength aluminum alloy. The cutter wheels and TOOLS reamer are made from hardened alloy steel.� ● The reamer is conveniently stored in the rear of the handle.� � ■Replacement Parts ■ Length of blade：10mm K-35-1/2/3 CASES & BAGS ■ O.A.L.：148mm BLADE ■ Weight：35g ■ 2/pack ■ K-35-1 For steel(black,single)� K-35-2 For resin(silver,double)� 148 K-35-3 Almighty blade(black,double)� 126 � TOOL KITS 11°� 23 K-35-2 SOLDERING TOOLS K-203 � PIPE CUTTER This tube cutter is designed to cut without leaving a ■Replacement Parts DESOLDERING burr or distorting the tube. K-203-1 � TOOLS ■ For stainless steel,copper pipe BLADE ■ Cuts Capability：3～32mm（1/8"～1 1/4"φ） There is a replacement ■ For stainless steel and ■ O.A.L.：130mm blade in the rear of the handle. copper pipe ■ Weight：205g INSTRUMENTS MEASURING ■ Accessory：K-203-1 K-203-11 � BLADE ■ Exclusive copper pipe MICROSCOPES & Grooved rolls for MAGNIFIERS close-to-flare cuts. Rotate to a direction K-203-1 of an arrow and cut tube off. With chamfering blade STATIC CONTROL STATIC K-88 � HAND NIBBLING TOOL ■Replacement Parts CLEAN This is a hand held nibbling cutter to cut any desired shape hole in sheet materials. K-881 � ENVIRONMENT BLADE ■ Cuts Capability：Thin iron sheet up to 0.6 mm thick. Aluminum plate up to 1.5 mm thick. ■ O.A.L.：173mm ■ Weight：190g CHEMICALS ※It requires a 10mm hole to allow the cutting tool to enter the work. MAINTENANCE TOOLS Brade Once the nibbler is inserted the user is free to cut any kind of hole they want. E-mail for a technical inquiry. [email protected] 51.