Toycen Cuttermasters.com The most complete source world wide for user friendly tool sharpening machines for machinists 2016 Product Lineup CBN and Diamond Tradesman Machinist Grinding Wheels Journeyman End Mill Sharpener v Machines at a glance Tool Grinder (End Mill Grinder) Journeyman End Mill and Tool Grinder JX (Machine only) ..........................$4,125.00 Journeyman Production Support Package JX-SP - JX including 7pc. 5C collet set, 1 set resin bond grinding wheel (CBN and diamond), Wheel Trueing Device, air filter and water separator, machine oiler, vibration dampening feet, taper attachment, work light, manual ...........................................$4,575.00 Journeyman Tool Room JXT (Machine only) .....................................$5,475.00 Cuttermaster CM-01 with Toycen DC Variable Speed Motor and control. JXT SP Production Support Package, (see above) add ............................. $400.00 CUTTERMASTER CM-01 DC (Machine only). $4,475.00 Cuttermaster CM-01 with Toycen DC Variable Speed Motor and control. CM-01 DC Production Support Package, add .................................... $400.00 Tradesman Machinist Weldon Flat Grinder - V-Block Set Up ....................$1,761.00 Tradesman Machinist Flats, Necks, Cut Off, Corner Rads - .....................$2,848.00 CS320 Combination Grinder - Drills and End Mills, 3-20mm (1/8” to 3/4”). .$4,125.00 Drill Point Grinders DS213 Drill and Spot Drill Grinder 2-13mm (1/8” to 1/2”) .......................... $975.00 DS220 Drill and Spot Drill Grinder 2-20mm (1/8” to 3/4”) .........................$1,612.50 DS232 Drill Grinder 2-32mm (1/8” to 1 1/4”) ....................................$2,887.50 End Mill End Grinders ES320 End Mill Grinder 3-20mm (1/8” to 3/4”) ..................................$2,525.00 ES1332 End Mill Grinder 13-32mm (1/” to 1 1/4”). ...............................$3,749.00 ESR320 End Mill End Grinder and Corner Radius Grinder 3-20mm (1/8” to 3/4”). $4,185.00 ESTC313 End Mill Grinder and Tool Cut-Off 3-13mm (1/8” to 1/2”) ................$2,799.00 Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution - 308 Isabella Street, Ogdensburg NY 13669 (800) 417-2171 www.cuttermasters.com or email: [email protected] v JX Journeyman All rights reserved. Patent Pending 2016 Air Bearing Stroke 10.5” (266.7mm) Air Bearing Swing Over Table 9.8”(248.92) Cutting Tool Capacity 2” shank, 9.8” O.D. Flute Length 10.5” T-Slot Dimension 0.8” (20.32mm) x 0.5” (12.7mm) x 0.67” (17.018mm) X-Axis Table Travel 6” (152.4mm) Y-Axis Table Travel 3” (76.2mm) + sildes 6”(152.4mm) X-Axis Table Working Space 16.5” (419.1mm) x 5.5” (139.7mm) Y-Axis Table Working space 13” (330.2) x 5.5” (139.7) Wheel Any tool grinding wheel Motor Tilt +35° -10° Easy Flutes and Ends Motor 400 - 4000 rpm, 500 W Flute Sharpening Tapered Weldon Flat Corner Radius and Reduced Neck Grinding Ball Nose Grinding Anular Cutter Countersink ,Champher Tool Tool Cut Off Tap Sharpening Sharpening Sharpening The CUTTERMASTER Journeyman JX is designed to be easy to set up and easy to use when grinding and re-grinding modern cutting tool materials and geometries. The DCK single wheel drive will mount any tool grinder wheel including Cuttermasters’ precision plated wheels, is reversible, variable speed and produces ten times the torque of the standard 1/3 HP motor (5 Foot Pounds @ 1000 rpm). This eliminates tool burning by facilitating heavy cuts at greatly reduced RPM, cutting grinding times in half on some tools. This new Torque Compensating DC Drive System has more down tilt and also swivels on the base to allow for faster alignment and positioning for grinding of countersinks, reamers, annular cutters and side and face cutters. Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution - 308 Isabella Street, Ogdensburg NY 13669 (800) 417-2171 www.cuttermasters.com or email: [email protected] v Journeyman Tool Room JXT All rights reserved. Patent Pending 2016 Air Bearing Stroke 10.5” (266.7mm) Air Bearing Swing Over Table 9.8”(248.92) Cutting Tool Capacity 2” shank, 9.8” O.D. Flute Length 10.5” T-Slot Dimension 0.8” (20.32mm) x 0.5” (12.7mm) x 0.67” (17.018mm) X-Axis Table Travel 6” (152.4mm) Y-Axis Table Travel 3” (76.2mm) + sildes 6”(152.4mm) X-Axis Table Working Space 16.5” (419.1mm) x 5.5” (139.7mm) Y-Axis Table Working space 13” (330.2) x 5.5” (139.7) Wheel Any tool grinding wheel Easy Flutes and Ends Motor Tilt and Rotate Infinite Motor 400 - 4000 rpm, 500 W Flute Sharpening Weldon Flat Grinding Corner Radius and Reduced Neck Ball Nose Grinding Countersink ,Champher Tool Inside Flute Grinding: Hog- Fast Ends Tool Cut Off Sharpening gers, Taps, End Mills The CUTTERMASTER Journeyman JXT Toolroom is designed to be fast to set up and allow for grinding most anything. The JXT Tower will mount any tool grinder wheel including Cuttermasters’ precision plated wheels, is re- versible, variable speed and produces ten times the torque of the standard 1/3 HP motor (5 Foot Pounds @ 1000 rpm). This eliminates tool burning by facilitating heavy cuts at greatly reduced RPM, cutting grinding times in half on some tools. This new Torque Compensating DC Drive System has more down tilt and also swivels on the base to allow for faster alignment and positioning for grinding of countersinks, reamers, annular cutters and side and face cutters. Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution - 308 Isabella Street, Ogdensburg NY 13669 (800) 417-2171 www.cuttermasters.com or email: [email protected] v TradesmanAll rights reserved US Patent No. 9,089,946. Patents Pending 2016 DC Variable Speed Bench Grinder Designed by Jeff Toycen Countersinks End Mills: Flats, Necks, Sharpeners Carbide Cut Off and Rads · Remove up to 50% more material at lower rpm · Grind just about anything without wheel load-up or glazing · Consistently flat and precise grinding surface a truly powerful variable speed tool grinder This is not your father’s bench grinder with lumpy stone wheels, dust and the required bucket of water. Wolverine-Ready for Woodturners In the world of bench grinders with conventional wheels about 50% of the effort, energy and torque in the grinding process is wasted in wheel wear and consump- tion causing heat and high loss in efficiency. Using a Toycen Tradesman Precision DC Grinder equipped with Cuttermasters’ Precision Superabrasive Wheels virtually all of the energy and mechanical effort is available for grinding “milling” action. This setup provides substantially higher torque and presents a new physical environment where material can be removed about twice as fast and at substantially lower rpm. The Toycen Tradesman Precision DC Grinder makes possible the grinding of carbide, carbon fiber, fiberglass, and plastics without the wheels loading up or glazing . Speed / Torque Compensation Control 5X more powerful than your average 8” It’s a new day. 5 ft·lbs at 1000 RPM grinder Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution - 308 Isabella Street, Ogdensburg NY 13669 (800) 417-2171 www.cuttermasters.com or email: [email protected] v TradesmanMachinist All rights reserved US Patent No. 9,089,946. Patents Pending 2016 ER-32 End Mill Workstation Weldon / Set Screw Flats Neck Reduction Grinds Carbide Cut Off Corner Rads Lathe Tools V-Block Workstation ER 32 End Mill Workstation Grind Weldon set screw flats and cut off carbide with the ER 32 Tool Head for grinding reduced necks, producing accurate Weldon Tradesman V-Block attach- flats and carbide tool cut off. 1/4” to 1” capacity (standard ER-32 Collet). ment Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution - 308 Isabella Street, Ogdensburg NY 13669 (800) 417-2171 www.cuttermasters.com or email: [email protected] v WoodworkersTradesman and Sharpeners All rights reserved US Patent No. 9,089,946. Patents Pending 2016 Rough. Sharpen. Hone. Reverse. Sharpen Knives Gouges Scissors Planer Blades Use your favorite jigs from the Tormek Sharpener system on the world’s best DC Variable Speed bench grinder with best precision plated CBN grinding wheels. Our plated wheels are fast, accurate (won’t change their shape) and won’t overheat your tools (no bucket of water required). • Whisper Drive DC Motor and Control • Torque Compensation • Grind anything. 400-4000 rpm • Cool. Powerful. Quiet. Woodworkers The Tradesman comes Wolver- ine ready. Woodturner sharpening set up on the Tradesman DC Bench Grinder. Quickly rough in and sharpen your woodturning tools on our Cuttermasters Precision Plated CBN grinding wheels. Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution - 308 Isabella Street, Ogdensburg NY 13669 (800) 417-2171 www.cuttermasters.com or email: [email protected] v Combination End Mill and Drill Grinder CS320 CS320 Combination End Mill and Drill Grinder • Grinds drills and 2-6 flute end mills 3mm to 20mm (1/8” to 3/4”) diameter • Creates 90° to 140° drill point angle • Creates variable split point geometry S / N / X and XR type (drills) • Adjustable depth-of-cut for split point geometry (drills) • Adjustable depth-of-cut for gash (end mills) • Includes 23pc collet set and two grinding wheels for both HSS and carbide tools. • Machine size: 45cm x 27cm x 19cm x 25kg Engineering and Prototyping - 2353 Ridgecrest Place, Ottawa ON K1H 7V4 Manufacturing and Distribution -