INSTALLATION INSTRUCTIONS FOR PART 99-3009 APPLICATIONS Chevrolet/Pontiac 1993-1999 Table of Contents 99-3009 Dash Disassembly – Chevrolet Camaro 1993-1996 ..............................................2 – Pontiac Bonneville 1994-1999 ..............................................2 – Pontiac Grand Am 1996-1998 ..............................................3 – Pontiac Grand Am 1999-2000 ..............................................3 KIT FEATURES – Pontiac Grand Prix 1994-1996 .............................................3 • DIN radio provision – Pontiac Grand Prix 1997-2003 .............................................4 – Pontiac Sunfire 1995-1999 ..................................................4 – Pontiac Trans Am/Firebird 1993 ............................................4 KIT COMPONENTS – Pontiac Trans Am/Firebird 1994-2002 ..................................5 • A) Radio housing • B) Spacer • C) (1) Keps nut • D) (1) Carriage bolt • E) (1) Phillips pan-head screw Kit Assembly A B C D E – DIN radio provision ...............................................................5 – Firebird/Trans Am 1994-1999, Bonneville/Grand Am/Grand Prix .....................................................................6 – Firebird/Trans Am 1993, Camaro 1993-1996 ........................6 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any WIRING & ANTENNA CONNECTIONS (sold separately) installation. All accessories, switches, and especially Wiring Harness: • 70-1858 - GM 1987-2005 air bag indicator lights must be plugged in before Antenna Adapter: • 40-GM10 - GM 1983-2013 reconnecting the battery or cycling the ignition. NOTE: Refer to the instructions included with the TOOLS REQUIRED REV. 2/5/2014 INST99-3009 REV. aftermarket radio. • Phillips screwdriver • Utility knife • Socket wrench METRA. The World’s best kits.™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION Dash Disassembly 99-3009 Chevrolet Camaro Pontiac Bonneville 1993-1996 1994-1999 1. Remove (2) Phillips screws from the 4. Remove (2) 7mm screws securing 1. Unclip the right side of the dash trim bezel. top of the driver’s side knee bolster. the left side of the factory radio and (1) 10mm nut securing the right. 2. Unclip the left side of the bezel and remove. (Figure A) 2. Remove (2) 7mm screws from the bottom of the knee bolster. 5. Slide the radio from the dash and 3. Remove (3) 7mm hex-head screws securing the factory radio and disconnect the wiring. disconnect the wiring. 3. Open the glove box, remove (3) 7mm 6. Cut and remove all mounting tabs on screws exposed on the right edge of 4. Cut and remove all mounting tabs on the radio housing EXCEPT tabs “C”. the radio housing EXCEPT tabs “A”. (Figure B) the radio trim bezel and remove the (Figure B) bezel. (Figure A) Continue to kit assembly Continue to kit assembly “A” “C” (Figure A) (Figure B) (Figure A) (Figure B) 2 Dash Disassembly 99-3009 Pontiac Grand Am Pontiac Grand Am 5. Unclip the radio trim bezel and remove. 1996-1998 1999-2000 6. Remove (2) 7mm hex-head screws securing the factory radio and disconnect the wiring. 1. Remove (2) Phillips screws from pocket. (Figure A) 1. Unclip the radio trim bezel. 7. Cut and remove all mounting tabs on the radio 2. Remove (2) Phillips screws above the housing EXCEPT tabs “C”. instrument cluster. 2. Remove (3) 9/32” screws securing the Continue to kit assembly 3. Unclip the dash trim bezel and remove. (Figure A) factory radio and disconnect the wiring 4. Remove (3) 7mm hex-head screws securing the 3. Cut and remove all factory radio and disconnect the wiring. mounting tabs on the “C” Cut and remove all mounting tabs on the radio radio housing EXCEPT 5. tabs “C”. (Figure A) housing EXCEPT tabs “C”. (Figure B) (Figure A) Continue to kit Continue to kit assembly assembly Pontiac Grand Prix (Figure A) 1994-1996 1. Using a small set of pliers, grasp the retaining clip on the back of the gear shifter handle and remove the clip. 2. Remove the gear shifter handle. “C” 3. Unclip the center console and remove. “C” 4. Remove (2) 7mm hex-head screws exposed under (Figure A) (Figure B) the climate controls. (Figure B) 3 Dash Disassembly 99-3009 Pontiac Grand Prix Pontiac Sunfire 1995-1999 Pontiac Trans Am/ 1997-2003 1. Open the glove box and remove (2) Phillips screws Firebird 1993 exposed on the right edge of the radio trim bezel. 1. Unclip the entire dash trim bezel. (Figure A) (Figure A) 1. Unclip the radio trim bezel. 2. Remove the screws securing the factory radio and 2. Unclip the bezel and remove. 2. Remove (4) 7mm hex-head screws securing the disconnect the wiring. factory radio and disconnect the wiring. 3. Remove (2) 7mm hex-head screws securing the 3. Cut and remove all mounting tabs on the radio factory radio and disconnect the wiring. 3. Cut and remove all mounting tabs on the radio housing EXCEPT tabs “C”. (Figure B) 4. Cut and remove all mounting tabs on the radio housing EXCEPT tabs “B”. Continue to kit assembly housing EXCEPT tabs “C”. (Figure B) Continue to kit assembly 5. Using a dremel tool, cut and remove the shaded portions of “C” the sub-dash plastic. This will provide the necessary depth for installation. (Figure C) Continue to kit assembly (Figure A) (Figure B) (Figure A) “C” “B” (Figure B) (Figure A) (Figure C) (Figure B) 4 Dash Disassembly 99-3009 Kit Assembly 99-3009 Pontiac Trans Am/Firebird All Vehicles 1994-2002 DIN radio provision: 1. Unclip the radio trim bezel. 1. Cut and remove the shaft supports from the 4. Locate the factory wiring harness in the dash. Metra 2. Remove (4) 7mm hex-head screws securing the spacer* and radio housing. recommends using the proper mating adapter from factory radio and disconnect the wiring. Metra or AXXESS. Re-connect the negative battery 2. Slide the DIN cage into the kit and secure by terminal and test the radio for proper operation. 3. Cut and remove all mounting tabs on the radio bending the metal locking tabs down. 5. Reassemble dash in reverse order of disassembly. housing EXCEPT tabs “C”. 3. Slide the aftermarket radio into the cage Continue to kit assembly until secure. *Optional when depth is an issue (Figure A) “C” (Figure B) (Figure A) 5 Kit Assembly 99-3009 Pontiac Firebird/Trans Am 1994-1999 Pontiac Firebird/Trans Am 1993 Bonneville/Grand Am/Grand Prix/Sunfire Chevrolet Camaro 1993-1996 Firebird/Trans Am 1994-1999, “A” and (1) Phillips pan-head screw Firebird/Trans Am 1993 Nut supplied. (Figure B) Bonneville, Grand Am, Grand Prix supplied “B”. (Figure B) 1. Mount the radio/kit assembly to the Continue to Step 2 1. Mount the radio/kit assembly to the Continue to Step 2 sub-dash with (4) 7mm hex-head sub-dash with (3) 7mm hex-head 2. Locate the factory wiring harness in 2. Locate the factory wiring harness in screws previously removed. the dash. Metra recommends using screws previously removed (run the the dash. Metra recommends using (Figure A) upper left screw through the dash the proper mating adapter from the proper mating adapter from Continue to Step 2 Metra or AXXESS. Re-connect the plastic for the Grand Prix). (Figure A) Metra or AXXESS. Re-connect the Continue to Step 2 Camaro 1993-1996 negative battery terminal and test negative battery terminal and test the radio for proper operation. Sunfire the radio for proper operation. 1. Mount the radio/kit assembly to the 3. Reassemble dash in reverse order of Reassemble dash in reverse order of sub-dash with (2) 7mm hex-head 1. Mount the radio/kit assembly to the 3. disassembly. sub-dash with (1) 7mm hex-head disassembly. screws previously removed in Step screws previously removed in Step 1 1 and (1) Carriage Bolt and (1) Keps “A” “B” (Figure A) (Figure B) (Figure A) (Figure B) 6 99-3009 Notes INSTALLATION INSTRUCTIONS FOR PART 99-3009 KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians REV. 2/5/2014 INST99-3009 REV. METRA. The World’s best kits.™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3009 APLICACIONES Chevrolet/Pontiac 1993-1999 Indice 99-3009 Desmontaje del tablero – Chevrolet Camaro 1993-1996 ..............................................2 – Pontiac Bonneville 1994-1999 ..............................................2 – Pontiac Grand Am 1996-1998 ..............................................3 – Pontiac Grand Am 1999-2000 ..............................................3 CARACTERÍSTICAS DEL KIT – Pontiac Grand Prix 1994-1996 .............................................3 • Provisión de radio DIN – Pontiac Grand Prix 1997-2003 .............................................4 – Pontiac Sunfire 1995-1999 ..................................................4 COMPONENTES DEL KIT – Pontiac Trans Am/Firebird 1993 ............................................4 • A) Alojamiento del radio • B) Espaciador • C) (1) Keps tuerca • D) (1) Perno de carro • E) (1) Tornillos – Pontiac Trans Am/Firebird 1994-2002 ..................................5 de cabeza plana Phillips Ensamble del kit A B C D E – Provisión de radio DIN ..........................................................5 – Firebird/Trans Am 1994-1999, Bonneville/Grand Am/Grand Prix .....................................................................6 – Firebird/Trans Am 1993, Camaro 1993-1996 ........................6